基于消息的Parlay X网关过载控制算法

为了解决目前Parlay X网关过载算法灵活性低、不能有效地使会话量最大化的问题,给出了基于合约的Parlay X网关系统架构。根据Parlay X消息类型特点设置消息优先级,根据消息优先级选择丢弃或者缓存消息,之后根据负载情况进行负载均衡以及接入控制,通过四个阶段来实现过载控制过程。实验结果表明,相比较于传统过载控制,该机制能在保证新建会话消息接收数量的同时提高其他类型消息的接收数量,减少平均服务时间,在满足合约限制的情况下,保证最大会话数量。     

Interfacial adhesion reaction of polyethylene and starch blends using maleated polyethylene reactive compatibilizer

The interfacial reaction of the polyethylene (PE)/starch blend system containing the reactive compatibilizer maleated polyethylene (m‐PE) was directly characterized by Fourier transform infrared (FTIR) spectroscopy. A significant amount of anhydride groups on m‐PE existed as hydrolyzed forms, resulting in a large amount of carboxyl groups. Using a vacuum‐heating‐cell designed in the laboratory, the carboxyl groups were successfully transformed into the dehydrolyzed state (i.e., anhydride group). This result enabled the direct spectroscopic observation of chemical reaction occurring at the interface. For the PE/starch blend system containing m‐PE, the chemical reaction at the interface was verified by the evolution of ester and carboxyl groups in the FTIR spectra. The effect of the reactive compatibilizer on the interfacial morphology was also examined by scanning electron micrography (SEM). Enhanced interfacial adhesion was clearly observed for the blend system containing reactive compatibilizer. Tensile strengths of blend systems containing m‐PE also increased noticeably compared with the corresponding system without compatibilizer. A similar observation was made for the breaking elongation data. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 83: 767–776, 2002     

Experimental and Numerical Analysis of the Viscous Fingering Instability of Shear‐Thinning Fluids

Miscible flow displacements in a rectilinear Hele‐Shaw cell of Newtonian as well as rheologically well‐characterized shear‐thinning fluids are examined through experimental measurements and numerical modelling. Water is used as a displacing fluid while the displaced fluid consists of either a reference Newtonian glycerol solution or shear‐thinning solutions of Alcoflood? polymers of different molecular weights. The experimental measurements revealed that the shear‐thinning behaviour of the non‐Newtonian solutions resulted in more complex instability patterns and new finger structures not previously observed in the case of Newtonian displacements are identified and characterized. An analysis of the effects of the rheological behaviour of the shear‐thinning fluids on instability characteristics such as the finger width and finger tip velocity is presented. Numerical simulations using a pseudo‐spectral method are conducted and allowed to compare the predictions of the mathematical model based on an effective Darcy's law with the experimental measurements.     

Time optimization of ultraviolet–ozone pretreatment for improving wool fabrics properties

Wool fabrics were exposed to ultraviolet (UV)–ozone treatment for different periods. After exposure, the fabrics were analyzed by Fourior transform infrared spectroscopy (FTIR). Also, the crystallinity and amorphousity regions were followed by an X‐ray diffraction technique. The results were correlated by mechanical properties measurements. After a certain period of exposure, the dyeability and printability were improved because these abilities are strongly related to the percentage ratio of crystallinity regions to amorphousity regions in wool fabrics. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 85: 1469–1476, 2002     

Poly(2‐hydroxyethyl methacrylate‐co‐ethylene dimethacrylate) as a mouse embryonic stem cells support

A series of swellable ethylene dimethacrylate‐crosslinked poly(2‐hydroxyethyl methacrylate) (PHEMA) sheets of homogeneous (nonporous) structure or with different degrees of swelling and porosities was produced by bulk polymerization in either the absence or the presence of various diluents (porogens). Calculations performed by use of the solubility parameter δ of the reaction components indicate that the solvation conditions of the polymerization system change, depending on the solvating power of the diluent, which thus controls the porosity. Pore volume also seemed to be sensitive to the presence of the linear polymer diluent. Polystyrene (PS) showed, compared with poly(methyl methacrylate) (PMMA), a higher precipitating ability to form porous PHEMA sheets with an increased pore size because of its higher noncompatibility with newly formed crosslinked PHEMA. Given that PHEMA hydrogel is well known for its biocompatibility, it was used here as a potential carrier of cells in transplantation therapies. Attachment and growth of mouse embryonic stem (ES) cells on gelatin‐coated transparent PHEMA hydrogel substrates were examined. Two days after plating, survival and morphology of ES cells were largely similar on both PHEMA hydrogel sheets and in petri dishes as controls. This suggests that PHEMA hydrogels are likely candidates for application in transplantation therapies involving ES cells. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 87: 425–432, 2003     

Synthesis and characterization of poly(urethane‐ester)s based on calcium salt of mono(hydroxybutyl)phthalate

Calcium‐containing poly(urethane‐ester)s (PUEs) were prepared by reacting diisocyanate (HMDI or TDI) with a mixture of calcium salt of mono(hydroxybutyl)phthalate [Ca(HBP)₂] and hydroxyl‐terminated poly(1,4‐butylene glutarate) [HTPBG₁₀₀₀], using di‐n‐butyltin‐dilaurate as catalyst. About six calcium‐containing PUEs having different composition were synthesized by taking the mole ratio of Ca(HBP)₂:HTPBG₁₀₀₀:diisocyanate (HMDI or TDI) as 3:1:4, 2:2:4, and 1:3:4. Two blank PUEs were synthesized by the reaction of HTPBG₁₀₀₀ with diisocyanate (HMDI or TDI). The polymers were characterized by IR, ¹H NMR, Solid state ¹³C‐CP‐MAS NMR, TGA, DSC, XRD, solubility, and viscosity studies. The T_g value of PUEs increases with increase in the calcium content and decreases with increase in soft segment content. The viscosity of the calcium‐containing PUEs increases with increase in the soft segment content and decreases with increase in the calcium content. X‐ray diffraction patterns of the polymers show that the HMDI‐based polymers are partially crystalline and TDI‐based polymers are amorphous in nature. The dynamic mechanical analysis of the calcium‐containing PUEs based on HMDI shows that with increase in the calcium content of polymer, modulus (g′ and g″) increases at any given temperature. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 100: 1720–1727, 2006     

Studies on urethane–allophanate networks based on hydroxyl‐terminated polybutadiene: Modeling of network parameters and correlation to mechanical properties

Hydroxyl‐terminated polybutadiene (HTPB)‐based allophanate–urethane networks were prepared by reacting HTPB with di‐isocyanates, such as toluene–di‐isocyanate (TDI), isophorone–di‐isocyanate (IPDI), and 4,4′‐di(socyanatocyclohexyl)methane (H₁₂MDI) at stoichiometric ratios (r‐values) ranging from 1.0 to 1.5. The networks were characterized for mechanical and swell properties. The network parameters, such as “X,” which is the fraction of urethane groups involved in the allophanate formation, and effective chain length (L_x) were calculated from experimental crosslink density values determined from swell data, using α‐model equations developed by Marsh. Excellent linear correlations were obtained between mechanical properties and the calculated network parameters. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 101: 2986–2994, 2006     

Applications of rheological torque–time curves to the study of thermooxidative degradation of polypropylene powder

The torque–time curves of polypropylene (PP) powder treated under various thermooxidative degradation conditions were obtained through processing in the mixing chamber of a rheometer. Meanwhile, the Fourier transform infrared (FTIR) spectra of the corresponding samples were determined, and the quantitative analysis of the carbonyl indices of the FTIR spectra of the samples of the PP powder was carried out to provide evidence for the rheological characterization. PP granules, to which an antideteriorant was added before they were commercially supplied so good antidegradation could be achieved, was investigated for the sake of contrast. The analysis of the experimental results showed that the height of the torque–time curve of the PP powder and the corresponding value of the equilibrium torque could be used to characterize or evaluate the variations of the thermooxidative degradation of the PP powder. Under the same processing conditions, the heights of the torque–time curves of the PP powder and the corresponding values of the equilibrium torque decreased with the enhancement of the thermooxidative degradation treatment before mixing; on the contrary, the heights and areas of the characteristic bands of the carbonyl groups in the FTIR spectra of the PP powder and the corresponding values of the carbonyl index increased. The quantitative analysis of the FTIR spectra provided evidence for the conclusion that the heights of the torque–time curves of the PP powder and the corresponding values of the equilibrium torque could be used to characterize or evaluate the thermooxidative degradation of the PP powder. If the treatment under thermooxidative degradation conditions weakened or the degradation of the PP powder just began (i.e., in the viscosity range for processability), the evaluation method using the heights of the torque–time curves of the PP powder or the corresponding values of the equilibrium torque could provide more sensitivity than the method using the values of the carbonyl index. Consequently, the method using the heights of the torque–time curves to evaluate the thermooxidative degradation of the PP powder had its advantages. The application of the torque–time curves could be used to evaluate not only the variation of the thermooxidative degradation of the PP powder treated under aging conditions before mixing but also the variation of the degradation, including the mechanochemical degradation, of the PP powder during the period of mixing. The dependence of the variation of the degradation of the polymer on the processing time during mixing could be evaluated by the study of the variation of the torque–time curves. It can be concluded that the application of torque–time curves to the evaluation of degradation of PP powder has the advantages of being convenient, real‐time, in situ, online, and production‐oriented. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci, 2007     

Solid/liquid extraction and isolation by molecular distillation of hydroxytyrosol from Olea europaea L. leaves

Molecular distillation, or short‐path distillation (SPD), is particularly appropriate for processing of low‐volatility compounds, which are easily altered at high temperature. Olea europaea L. leaves constitute an olive tree by‐product very interesting for their natural antioxidants content. In this research, molecular distillation technology has been applied to obtain high‐value‐added compounds by the SPD fractionation of an olive tree leaf extract. The process consists of two stages: (a) ethanolic extraction of the olive leaves, followed by incorporation of the extract into glycerine and (b) molecular distillation of the glycerine enriched in olive leaf extract compounds (terpenic and phenolic compounds). Four molecular distillation tests under different conditions were carried out. Results showed that 80.9% 3,4‐dihydroxy‐phenylethanol (hydroxytyrosol) was recovered from the glycerine admixture under a pressure of 1.50–2.00 mbar, a temperature of 190 °C and a feed rate of 15 mL/min.     

Preparation of a self‐compatibility alloy via a seed‐graft concentrated‐emulsion pathway

A novel polymerization procedure, the concentrated‐emulsion graft polymerization of styrene monomer with poly(butyl acrylate) seed, was proposed for the production of a self‐compatibility macromolecule alloy. The effects of the butyl acrylate content, sodium dodecyl sulfate concentration, and polymerization temperature on the graft ratio were investigated. Scanning electron microscopy, transmission electron microscopy, and impact strength were used to characterize the microstructure and mechanical performance of the self‐compatibility macromolecule alloy. The results showed that increasing the butyl acrylate content, reducing the sodium dodecyl sulfate concentration, and improving the polymerization temperature all favored an increased graft ratio, which resulted in increased impact strength of the self‐compatibility macromolecule alloy. Therefore, the concentrated‐emulsion polymerization method is particularly suitable for seed‐graft polymerization. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 83: 2915–2920, 2002; DOI 10.1002/app.10288