Characterization and density control of GaN nanodots on Si (111) by droplet epitaxy using plasma-assisted molecular beam epitaxy

In this report, self-organized GaN nanodots have been grown on Si (111) by droplet epitaxy method, and their density can be controlled from 1.1 × 10¹⁰ to 1.1 × 10¹¹ cm^-2 by various growth parameters, such as substrate temperatures for Ga droplet formation, the pre-nitridation treatment of Si substrate, the nitridation duration for GaN crystallization, and in situ annealing after GaN formation. Based on the characterization of in situ RHEED, we can observe the surface condition of Si and the formation of GaN nanodots on Si. The surface nitridaiton treatment at 600°C provides a-SiNx layer which makes higher density of GaN nanodots. Crystal GaN nanodots can be observed by the HRTEM. The surface composition of GaN nanodots can be analyzed by SPEM and μ-XPS with a synchrotron x-ray source. We can find GaN nanodots form by droplet epitaxy and then in situ annealing make higher-degree nitridation of GaN nanodots.     

Determination of moisture content of polyamide 66 directly from combination region near‐infrared spectra

The hygroscopic nature of polyamide (PA) polymers motivates the development of analysis tools for use in assessing their moisture content. Among possible analysis techniques, near‐infrared (near‐IR) spectroscopy is non‐destructive, requires little or no sample preparation, and is compatible with sample thicknesses on the order of mm. The work reported here makes use of transmission near‐IR spectroscopy in the combination region (5000–4000 cm^?1) to develop a protocol for assessing the moisture content of PA 66 samples directly from their spectral intensities after preprocessing with the standard normal variate transform and partial least‐squares. The method is compatible with online or continuous monitoring applications and can be calibrated without the use of destructive reference measurements such as thermogravimetric analysis. The long‐term calibration performance of the technique is evaluated, and on a scale of 0–100% moisture uptake, the standard error of prediction is found to average 1.4% over 6 months. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40645.     

Total reflection X-ray spectroscopy as a rapid analytical method for uranium determination in drainage water

Uranium concentrations in drainage water are typically determined by α-spectrometry. However, due to the low specific radioactivity of uranium, the evaporation of large volumes of drainage water, followed by several hours of measurements, is required. Thus, the development of a rapid and simple detection method for uranium in drainage water would enhance the operation efficiency of radiation control workers. We herein propose a novel methodology based on total reflection X-ray fluorescence (TXRF) for the measurement of uranium in contaminated water. TXRF is a particularly desirable method for the rapid and simple evaluation of uranium in contaminated water, as chemical pretreatment of the sample solution is not necessary, measurement times are typically several seconds, and the required sample volume is low. We herein employed sample solutions containing several different concentrations of uranyl acetate with yttrium as an internal standard. The solutions were placed onto sample holders, and were dried prior to TXRF measurements. The relative intensity, otherwise defined as the net intensity ratio of the Lα peak of uranium to the Kα peak of yttrium, was directly proportional to the uranium concentration. Using this method, a TXRF detection limit for uranium in contaminated water of 0.30 µg/g was achieved.     

如何认识制动液/水溶液的液态不溶物

一般认为制动液/水溶液中的液态不溶物是矿油。红外光谱发现,其液态不溶物除了矿油外还有其它的化学物质。矿油和这些化学物质是被原料或在生产和使用中带入制动液中的。     

Non-invasive and rapid analysis for observation of internal structure of press-coated tablet using X-ray computed tomography

Background: Since the internal structure of a tablet can be measured without destruction of the sample by X‐ray computed tomography (CT), it could be applied to quality control of tablets during the manufacturing process. Aim: A novel, fast, noninvasive tablet observation method was developed to evaluate the internal structure of commercial press-coated tablets by using X-ray CT. Method: Thirty-two CT image slices of four kinds of commercial press-coated tablets (tablets A, B, C, and D) were measured 300 m interval between edges of the tablet by using an X-ray CT. The thinnest layer thickness of the tablets and distance between centers of gravity (DCG) of tables were calculated. Results: The order of the TLT of the tablets was tablet B > tablet C > tablet D > tablet A. The result indicated that the order of DCG was tablet A > tablet D > tablet C > tablet B. Noninvasive observation of the internal structure of commercial, press-coated tablets by X-ray CT has been demonstrated to be useful in quality control of production. Conclusion: The internal structure of press-coated tablets could be observed without pretreatment, without destruction, and very rapidly by X‐ray CT.     

Dual detection biosensor based on porous silicon substrate

Due to the high surface-to-volume ratio (hundreds of m²/cm³) porous silicon became during the last years a good candidate material as substrate for biosensor application. Moreover, the versatility of surface chemistry allows different functionalization approaches and large number of molecules to be captured on well-defined areas. This paper reports a dual detection method for protein recognition processes developed on different nanostructured porous silicon (PS) substrates, based on using two complementary spectroscopic techniques: fluorescence and electrochemical impedance. The structures were tested for biomolecular recognition – biotin–strepavidin couples – in order to achieve an optimum surface for protein's immobilizations. Comparative analyses of the attachment degree and preservation of the biomolecules activity on the porous silicon surfaces and silicon slides are also described.     

Impedance spectroscopy analysis of CeNbO4.25

Monoclinic CeNbO4.25 was prepared by solid state reaction. Complex impedance analysis indicated the presence of grain interior effect along with the grain boundary contribution. The values of ionic tra...     

Photon interaction with semiconductor and scintillation detectors

Molten salt is used as primary coolant flowing through graphite moderator channel of a molten salt reactor.Working at high temperature under radiation environment,the pore network structure of nuclear graphite should be well understood.In this paper,X-ray tomography is employed to study the 3D pore structure characteristics of nuclear grades graphite of IG-110,NBG-18 and NG-CT-10,and permeability simulation through geometries are performed.The porosity,number of pores and throats,coordination number and pore surface are obtained.NGCT-10 is of similar microstructure to IG-110,but differs significantly from NBG-18.The absolute permeabilities of IG-110,NG-CT-10 and NBG-18 are 0.064,0.090 and0.106 mD,respectively.This study provides basis for future research on graphite infiltration experiment.     

Structure and mechanical properties of boron-rich boron carbides

A series of boron-rich boron carbides are investigated to explore the effect of boron/carbon ratios on the microstructure and mechanical properties of the complex material. It has been found that excess boron substitution gives rise to expanded lattice constants, orientational asymmetry of the chain structure and distortion of the icosahedra of rhombohedra B₄C units in comparison with conventional carbon-rich boron carbides. Microstructure characterization reveals a high density of stacking faults and growth twins in boron-rich boron carbides. Nanoindentation measurements demonstrate that the hardness and modulus of boron-rich boron carbides decrease with the increase of boron content while the B_10.2C sample with the highest boron substitution shows relatively high hardness and modulus. This study suggests that the structure of single-phase covalent materials could be tailored by self-alloying for improved mechanical properties.