A new class of corrosion inhibitors for waterborne coatings: 4-methyl-γ-oxo-benzene-butanoic acid complexes

Amine and transition metal based complexes with 4-methyl-γ-oxo-benzene-butanoic acid represent a new class of corrosion inhibitors specifically designed for long-term corrosion protection in waterborne coatings. Today, corrosion protection in waterborne technology is typically achieved using traditional anticorrosive pigments initially developed for use in solventborne coatings. Regulations concerning heavy metals and limitations regarding the compatibility and performance of such materials in waterborne coatings have created a need for novel approaches. Mechanistic aspects are discussed for the 4-methyl-γ-oxo-benzene-butanoic complexes based on electrochemical solution experiments (electrochemical impedance spectroscopy (EIS), linear sweep voltammetry (LSV)) and investigations performed on coated substrates. Exposure results underline the high efficiency of such complexes for both long-term corrosion protection and weld seam rust control in waterborne coatings.     

Laboratory study of soil acidification and leaching of nutrients from a soil amended with various surface-incorporated acidifying agents

Granular S, finely-ground S, iron sulphate and aluminium sulphate were added at two rates to the surface (0–6 cm) of a soil and acidification and leaching of nutrients were measured over 12 months in a laboratory study. Iron and aluminium sulphate both rapidly lowered soil pH in the top 0–6 cm of the soil. There was little difference in soil pH after 3 and 12 months reaction of these two amendments. In contrast, for granular S and finely-ground S there were clear decreases in soil pH between 3 and 12 months reaction with the soil. Finely-ground S was oxidized in the soil faster than granular S and therefore had a more acidifying effect. The top 0–6 cm of the soil was acidified by all the agents used but the deeper soil was less affected. The only treatments which lowered the pH of the 12–18 cm layer below pH 6 were the high rates of iron and aluminium sulphate. Soil acidification resulted in a decrease in exchangeable Ca, Mg and K, an increase in exchangeable Al and a decrease in effective CEC in the acidified soil layers.At both levels of addition, total ionic strength of percolates from the soil followed the order: aluminium sulphate = iron sulphate > finely gound S > granular S > control and was higher at the higher rate of addition. The pH values of percolates followed the order: control > granular S > finely ground S > iron sulphate = aluminium sulphate and were lower at the higher rate of addition. For the amended soils there was a very close relationship between the pattern and total amounts of SO ₄ ^2- and Ca²⁺ leached.It was concluded that granular S is not an effective acidifying agent since it is oxidized very slowly in the soil and that acidfying agents should be incorporated to the depth that acidification is required.     

Oxidative dehydrogenation of ethane over Co–BaCO3 catalysts using CO2 as oxidant: effects of Co promoter

Co–BaCO₃ catalysts exhibited high catalytic performance for oxidative dehydrogenation of ethane (ODE) using CO₂ as oxidant. The maximal formation rate of C₂H₄ was 0.264 mmol · min⁻¹ · (g · cat.)⁻¹ (48.0% C₂H₆ conversion, 92.2% C₂H₄ selectivity, 44.3% C₂H₄ yield) on 7 wt% Co–BaCO₃ catalyst at 650 °C and 6000 ml. (g · cat.)⁻¹. h⁻¹. Co–BaCO₃ catalysts were comparatively characterized by XRF, N₂ isotherm adsorption-desorption, XRD, H₂-TPR and LRs. It was found that Co⁴⁺–O species were active sites on these catalysts in ODE with CO₂. The redox cycle of Co–O species played an important role on the catalytic performance of Co–BaCO₃ catalysts. On the other hand, the co-operation of BaCO₃ and BaCoO₃ was considered to be one of possible reasons for the high catalytic activity of these catalysts.     

Synthesis, characterization, and catalytic properties of polysiloxanes with pendant 4-(3-pyridinyl)butyl and 4-(1-oxypyridin-3-yl)butyl groups

New silane monomers with the pendant 4-(3-pyridine)butyl group have been synthesized by hydrosilation of 3-(3-butenyl)pyridine with Me _n Si(OEt)_3-n H (n=0, 1) using a platinum catalyst. Only -addition products were observed. The products were characterized by elemental analysis, infrared,¹H- and¹³C-NMR spectroscopy, and gas chromatography-mass spectrometry. Hydrolysis-polycondensation of the difunctional monomer with a basic catalyst, Me₄NOH, gave a mixture of cyclic oligomers, principally cyclic tetramer, and linear homopolymer. Under similar reaction conditions, the trifunctional monomer gave crosslinked material which was soluble in common organic solvents. The linear homopolymer and crosslinked polymer were trimethylsilyl end-blocked with hexamethyldisilazane. The cyclic and end-blocked polymers were characterized by elemental analysis and spectroscopic methods. Molecular weights of the polymers were obtained by end-group analysis using¹H-NMR spectral data, size exclusion chromatography, and direct insertion-probe mass spectrometry. The cyclic, linear, and crosslinked materials were N-oxidized withm-chloroperoxybenzoic acid and characterized by spectroscopic methods. The polymeric N-oxide derivatives were shown to be effective transacylation catalysts in the synthesis of mixed carboxylic acid anhydrides in immiscible solvents (H₂O/CH₂Cl₂) under phase-transfer conditions. The implications of the results on the mechanism of catalysis are discussed.     

Transient and isotopic studies of the oxygen transport and exchange during oxidative coupling of methane on Sr promoted La2O3

Isotopic transient techniques were applied to study oxidative coupling of methane over lanthanum oxide and strontium promoted La₂O₃ catalysts. Results of the¹⁸O₂/¹⁶O₂ isotopic exchange experiments indicate that Sr promotion increases oxygen uptake from the lattice of the catalyst. Oxygen self diffusion coefficients, which were determined for the series of lanthana catalysts, reach a maximum for the 1% Sr/La₂O₃. Steps of¹⁸O₂ in the presence of a steady flow of methane over Sr/La₂O₃ catalysts, indicate that surface and bulk oxygen appear in the reaction products before gas-phase¹⁸O². Steps of CO₂ over catalysts in which lattice oxygen has been exchanged with¹⁸O₂, show that gas/solid exchange involves over 50% of the lattice oxygen. Under reaction conditions, methane pulses with no gas-phase oxygen yield negligible amounts of products which indicates that methane interacts with lattice oxygen only in the presence of the gas-phase oxygen.     

纳米稀土复合固体超强酸催化合成乙酸苄酯

采用共沉淀法制备了纳米稀土复合固体超强酸SO4^2-／ZrO2-2％Nd2O3催化剂，电镜分析表明，催化剂颗粒直径在25nm左右，比表面积测定：71．03m^2／g。酸强度-12．70〈Ho〈-11．99。并对合成乙酸苄酯的最佳反应条件进行了研究。研究表明：当苯甲醇与乙酸的物质的量比为1：2，反应时间为5h，反应温度为120℃，催化剂用量为6％苯甲醇的质量时，酯化率可达92．04％。研究发现，该催化剂可重复使用并可活化再生。     

PP/纳米级CaCO_3复合材料的研究

研究了纳米级CaCO3填充粒状、粉状PP复合材料的力学性能,并用SEM观察纳米级碳酸钙在PP中的分散状态及用SALS分析了其结晶行为。结果表明,粉状PP更有利于纳米级碳酸钙在PP中的分散,并具有更好的加工性能、力学性能。同时纳米级碳酸钙改性PP的SALS图像变得弥散、模糊,PP球晶变得不完善,晶粒更小。     

Monitoring slope deformation using a 3-D laser image scanning system:a case study

An ILRIS-36D 3-D laser image scanning system was used to monitor the Anjialing strip mine slope on Pingshuo in Shanxi province.The basic working principles,performance indexes,features and data collection and processing methods are illustrated.The point cloud results are analyzed in detail.The rescale range analysis method was used to analyze the deformation characteristics of the slope.The results show that the trend of slope displacement is stable and that the degree of landslide danger is low.This work indicates that 3-D laser image scanning can supply multi-parameter,high precision real time data over long distances.These data can be used to study the distortion of the slope quickly and accurately.     

Zn掺杂对GdMnO体系的晶体结构影响

系统研究了Gd（1-x）ZnxMnO3（x=0,0.2,0.4,0.6,0.8,1.0）体系的结构。结果表明,实验样品具有正交对称性结构。当Zn掺杂浓度x≤0.4时,随着Zn掺杂浓度的增加,晶格常数b、c减小,而晶格常数a增大,晶胞体积逐渐减小;当掺杂浓度x≥0.6时,Zn掺杂浓度的增加,晶格常数b、c增大,而晶格常数a减小,晶胞体积逐渐增大。计算表明Gd（1-x）ZnxMnO3系列化合物的容忍因子在0.76~0.92范围,可以形成稳定的钙钛矿结构。