NUMERICAL STUDY ON SORET-EFFECT AND DUFOUR-EFFECT FOR DOUBLE-DIFFUSIVE NATURAL CONVECTION IN POROUS ENCLOSURE

The influences of Soret effect and Dufour effect on the natural convection and heat and mass transfer for a porous enclosure were investigated by means of the penalty finite element method. Numerical results indicate that the Soret and Dufour effects have significant influences on heat and mass transfer in the presence of large temperature gradient and concentration gradient.     

GJ5×2双槽剥片机及其在高岭土剥片中的应用

GJ5×2大型双槽剥片机是国内超细物料加工中最新出现的超细磨/剥片设备,也是目前国内这一领域内最大规格的设备,已成功应用于煤系硬质高岭土剥片中,单机能力可达1.5～2.0t/h,产品细度可达小于2μm颗粒占85%～90%。     

钻井井架力学性能分析

钻井井架作为钻机系统设备中的关键部分,其力学性能直接关系到整套钻机系统的安全生产。文章推导了常用于分析钻井井架力学性能的理论,即线性屈曲、几何非线性和双重非线性理论。提出同时用这三种理论对钻井井架进行综合比较分析,从而合理地预见井架力学性能的方法。以A形钻井井架为例,进行了详细的分析,得到了井架的失稳形式、极限承载、破坏特征及薄弱部位,为钻井井架的设计、优化与评定提供了参考。     

Multi-step transformation in numerical renormalization group

We compute the temperature dependent magnetic susceptibility of the single-impurity, two-channel Anderson model with an alternative multi-step numerical renormalization-group transformation, previously applied only to the two-impurity single-channel Kondo model. Compared with the traditional transformation, the new procedure requires substantially less memory and computational time, and opens therefore perspectives for the application of the numerical renormalization-group procedure to more complex Hamiltonians.     

双工频感应加热淬火技术在小型冷轧工作辊上的应用

双工频感应加热淬火Φ200mm以下的小型冷轧工作辊，其性能优于单工频感应加热淬火，延长了轧辊的使用寿命。     

Race as a moderator in a model of sexual harassment: An empirical test.

L. F. Fitzgerald, C. L. Hulin. and F. Drasgow (1995) proposed that victim characteristics, such as race, might moderate the relationships between sexual harassment and its job, psychological, and health status outcomes. This study describes 2 theoretical positions, tokenism and double jeopardy, that could account for this possible moderation by race, as well as the alternative view that no moderating effects exist. The effects of race are empirically examined through simultaneous path analysis. Results indicate that whereas, mean levels of harassment differ across race, the phenomenon of sexual harassment unfolds similarly across races; race is not a moderator of the relationships between sexual harassment and the variables proposed as its antecedents and outcomes. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

用αβ谱仪测量人工αβ放射性气溶胶体积活度的试验研究

本文介绍了用αβ谱仪系统同时测量αβ谱、实现Ｒｎ／Ｔｈ子体补偿、确定超铀α核素气溶胶体积活度及人工放射性气溶胶总β体积活度的技术途径。利用ＲａＡ、ＲａＣ′ａ峰的二段时间计数可确定空气中ＲａＡ、ＲａＢ、ＲａＣ的气溶胶体积活度，相应的，也能给出ＲａＢ、ＲａＣ对总β计数的贡献。根据一般环境条件下的平衡比，用ＴｈＣ′的。计数修正Ｔｈ子体对αβ测量的影响。￣［２３９］ｐｕ或／和￣［２４１］Ａｍ人工核素的α计数，可通过两段时间分别扣除ＲａＡ、ＲａＣ′拖尾的方法确定；β计数分别扣除Ｒｎ／Ｔｈ子体β贡献即可确定。在本文规定的测量条件下，对室内天然Ｒｎ子体水平在１５Ｂｑ／ｍ￣３以下，超铀α核素气溶胶体积活度的测量下限可达到０．１Ｂｑ／ｍ￣３；即使在７５Ｂｑ／ｍ￣３环境下，人工核素总β的测量下限也可达ｌＢｑ／ｍ￣３以下。     

Design of a high-pressure ebulliometer,with vapor-liquid equilibrium results for the systems CHF2 Cl + CF3 CH3 and CF3 CH2 F + CH2F2

We describe the design and operation of a new high-pressure metal ebulliometer which can operate at pressures to at least 3 MPa in the range 220–400 K. Infinite-dilution activity coefficients are presented for the system CHF₂Cl + CF₃-CH, at 275 K and for the system CF₃-CH₂F + CH₂F₂, at 260, 230, and 300 K. The Wilson activity coellicient model and a virial coefficient model are applied to these systems, and the phase equilibrium conditions are calculated. The results are shown to agree well with predicted and with published measured values. The excess enthalpy is calculated and compared with results from a Peng Robinson equation of state. Vapor densities on the dew curves are given.     

二流量试井工艺及资料解释分析方法

描述了二流量试井工艺的实现，从常规分析和双对数曲线拟合两上方面，给出了二流量试井的资料解释分析方法，分析认为二流量试井同样可以计算出正常关井测压力恢复（或压力降落）资料所解释的油藏及流体参数。这种试井方法不但可以减少因正常关井测压对产油量和注水量的影响，而且可以减缓因突然关、开井造成的套管变形或损坏。实践证明，该试井技术方法具有较好的经济效益和应用前景。     

喷嘴结构对高压射流特性影响研究

自20世纪70年代以来,高压水射流技术已在各工业领域逐渐得到了广泛应用,但迄今仍未能大规模采用,原因是还存在一些有待解决的问题,其中最为迫切的就是如何提高喷嘴射流效率、充分利用其能量的问题。喷嘴是水射流技术应用中获得高能量利用率的关键因素之一,其结构好坏直接影响射流质量。为充分发挥喷嘴最大效率,最大限度地利用水力能量,国内外有关专家从理论分析、数值计算和实验研究3个方面对喷嘴结构与高压射流特性的关系进行了研究分析,结果表明喷嘴结构对射流流动特性、冲蚀性能、空化现象等产生重要影响,指出提高喷嘴效率应当着眼于以下几个方面:加强基础研究;改变射流作用方式、将连续射流调制成脉动射流;充分利用空化空泡破裂压力,研制开发优质喷嘴,以期对拓宽水射流技术在工业中的应用有所帮助。