A protein which masks galactose receptor mediated phage susceptibility in Lactococcus lactis subsp. lactis MPL56

A 28.5-kb plasmid, isolated from Lactococcus lactis subsp. lactis MPL56, causes complete inhibition of four lactococcal phages. Cell wall characteristics of wild-type strain MPL56 were compared with its 28.5 kb plasmid-cured, phage-sensitive derivative MPL56-22. After proteolytic enzyme treatments, adsorption of phages occurred at high levels, an example is 94.6–98.5% in MPL56 cells. Analysis of cell wall extracts of MPL56-22 by sodium dodecyl sulphate–polyacrylamide gel electrophoresis (SDS–PAGE) indicated that the only difference between strains was the 55.4 kDa band in protein patterns of MPL56. Adsorption of the four phages was completely inhibited when MPL56-22 cells were subjected to SDS, Triton-X-100, HCl and NaOH treatments. Lectins that were specific for glucose/mannose and N-acetylglucosamine did not prevent adsorption of phages in cell wall extracts of MPL 56-22. However a lectin specific for galactose (MCA; Momordica charantia ) completely inhibited adsorption of these phages in cell wall extracts of MPL56-22. HPLC patterns of cell wall carbohydrates of MPL56-22 and its HCl treated preparations showed that the most prevalent difference was the galactose on untreated MPL56-22 cell wall chromatograms.     

高架桥中异形板裂缝的分析与加固

从分析某高架桥中异形板板底裂缝的特点及成因着手 ,对设计与施工工艺诸方面提出防止裂缝的对策和对裂缝进行加固的全过程。     

球磨机衬板材料及热处理工艺

对传统的中碳低合金耐磨铸钢的化学成分和热处理工艺进行了优化设计 ,使新材料具有较高的强度、硬度和韧性 ,因而抗冲击、抗疲劳、抗磨损性能良好。实际应用表明 ,用此种材料代替油淬和风冷中碳低合金耐磨铸钢 ,不仅生产成本低 ,而且在矿山、电力球磨机制粉等工矿条件下 ,其使用寿命长     

Variation in Malting Quality and Heat Resistance in the Malting Barley Variety “Alexis”

In earlier studies concerning vigour, where subsamples are heat‐treated before germination there was found heat‐sensitive as well as heat‐resistant barley samples. The vigour model developed by Ellis and Roberts and further developed at Carlsberg, could only describe the heat‐sensitive barleys. Seventeen samples of the “Alexis” variety grown widely in Europe were collected from the EBC trials in 1994 in order to see if heat resistance in barley was influenced by different growing conditions. We found both heat‐sensitive samples following the vigour model as well as pronounced heat‐resistant samples, but these were not divided according to growing conditions. The germination curves dependent on heat treatment and germination time were evaluated by Principal Component Analysis (PCA). Heat‐resistant barley samples could be differentiated from heat‐sensitive samples already after ½ h of heat treatment at 68°C (12% moisture) and after 3 days of germination. The barley samples were analysed with regard to malting quality. The PCA evaluation of the data divided the samples according to growing location, mainly due to differences in protein and β‐glucan. However, the malting analyses could not describe the differences in heat resistance and sensitivity of the barleys. The biochemical background of the heat resistance found is discussed on the basis of literature. Our findings should give an experimental basis for exploiting a biochemical principle for heat resistance, which is formed during grain filling and consumed during storage and germination.     

Effects of fluoropolymer addition to an epoxy on scratch depth and recovery

Samples were prepared by addition of a fluorinated poly(aryl ether ketone) (12F-PEK) to a commercial epoxy resin and curing at either 24 °C or 70 °C. The concentrations of fluoropolymer in the samples were 0, 5, 10, 20, 30, 40, and 50%. Phase inversion facilitates the formation of more and more smooth surfaces for scratch testing with increasing fluoropolymer concentration. A progressively increasing load from 0.03 N to 12 N was administered with a diamond tip to the surfaces of the samples; depths were determined within ±7.5 nm. The original scratch depth is a function of the fluoropolymer concentration. Scratch recovery (healing) reaches values up to 95%. Plots of the residual depth versus concentration of the fluoropolymer at 4, 6, 8, and 10 N reveal minima for all forces and both temperatures. Addition of only 5% or 10% 12F-PEK improves the scratch recovery significantly. The results are explained by changes of material morphology with the fluoropolymer concentration. Electronic Publication     

关于CEA混凝土膨胀剂的若干技术问题--与游宝坤同志讨论

作者阐述了CEA膨胀剂混凝土的膨胀量较大，干缩小，抗裂性能良好的特性，CEA与粉煤灰掺用提高强度，改善界面过渡层的性质，提高耐久性；CEA混凝土无Ca（OH）2溶出问题。文中列出GBJ119应用技术规范，说明CEA可用于防水工程。     

新型哈氏合金G—30的耐蚀性能与工业应用

文章叙述了新型镍基耐蚀哈氏合金G-30在不同介质中的耐蚀性能以及工业应用,综合分析了该合金应用的经济性及前景。     

网带式连续烧结炉炉温及网带速度微机控制系统

本文介绍一个基于ＳＴＤ总线的单片机网带式连续烧结炉炉温及网带速度控制系统，详细叙述了系统的硬件结构和控制算法。     

T8钢—聚有机硅氧烷仿生减粘降阻复合涂层的特性

研究了Ｔ８钢－聚有机硅氧烷仿生减粘降阻复合涂层的表面润湿性，磨料磨损性及土壤的减粘降组性能，与金属材料相比，仿生复合涂层的表面憎水性显著提高，水在其表面上的接触角达９２°；与４５钢相比，其磨料磨损的体积相对耐磨系数为６３％，降阻率达１５．２２％－－２２．２７％。     

Charge transfer resistance of spray deposited and compressed counter electrodes for dye-sensitized nanoparticle solar cells on plastic substrates

Electrochemical impedance spectroscopy was used to determine the effective charge transfer resistances of porous dye-sensitized solar cell counter electrodes prepared by low-temperature spray deposition and compression of conductive carbon and platinized Sb-doped SnO₂ powders on indium tin oxide-coated plastic substrates. The charge transfer resistances were 0.5–2 and 8–13 Ω cm², respectively, when using 3-methoxypropionitrile as the electrolyte solvent. The manufacturing method used lends itself to produce mechanically stable and even-quality electrodes in an easy and fast manner.