Model for microbiologically influenced corrosion potential assessment for the oil and gas industry

Corrosion is one of the major causes of failure in onshore and offshore oil and gas operations. Microbiologically influenced corrosion (MIC) is inherently more complex to predict, detect and measure because, for instance, the presence of biofilm and/or bacterial products is not sufficient to indicate active microbiological corrosion. The major challenge for current MIC models is to correlate factors that influence corrosion (i.e. chemical, physical, biological and molecular variables) with the potential of having MIC. Previous work has proposed the potential for MIC as a simple product of multiple factors, without fully considering the synergy or the interference among the factors. The present work proposes a network-based approach to analyse and predict MIC potential considering the complex interactions among a total of 60 influencing factors and 20 screening parameters. The proposed model has the ability to capture the complex interdependences and the synergic interactions of the factors used to assess MIC potential and uses an object-oriented approach based on a Bayesian Network. The model has been tested and verified using real data from a pipeline leakage incident that was a result of MIC. The proposed model constitutes a significant step in deepening the understanding of when MIC occurs and its predictability.

List of acronyms: APB: acid producing bacteria; Aw: water activity; BN: Bayesian network; MIC: microbiologically influenced corrosion; MMMs: molecular microbiological methods; NRB: nitrate-reducing bacteria; OOBN: object-oriented Bayesian network; PWRI: produced water re-injection; SPs: screening parameters; SRB: sulphate-reducing bacteria; SRPs: sulphate-reducing prokaryotes; TDSs: total dissolved solids     

F28不锈钢晶间腐蚀敏感性研究

采用Huey试验法和电化学测试技术研究了新型F28低偏析个锈钢的晶间腐蚀敏感性,结果表明这种钢具有良好的抗晶间腐蚀和选择性腐蚀性能,可以代替316L或2RE69不锈钢在尿案工业中应用.     

Ni含量对Fe－Cr－Ni合金激光熔覆层性能及开裂敏感性的影响

Ｎｉ含量对Ｆｅ－Ｃｒ－Ｎｉ合金激光熔覆层性能及开裂敏感性的影响宋武林，朱蓓蒂，曾晓雁，崔昆（华中理工大学）金属涂层开裂是激光熔覆工艺中一个难题。发生开裂的主要原因是涂层形成过程中产生的各种应力，其中包括热应力、组织应力和拘束应力。这些应力的大小多与涂...     

Evaluation of corrosion behavior of Al-Mg-Li alloys in seawater

Weldalite 050, a high-strength Al-Mg-Li alloy, was evaluated for its corrosion resistance in deaerated and air saturated Arabian Gulf water to determine its suitability for marine applications. Weight loss and electrochemical studies showed that the alloy had minimum corrosion rates of 1.82 and 4.82 mpy (mils per year), respectively, in deaerated and air saturated Arabian Gulf water with very high total dissolved solids (TDS) content. Weldalite 050 exhibited good resistance to corrosion at velocities up to 3.9 m/s. The formation of Al₂MgLi, Al-Li, Al₁₂Mg₁₇, and Al-Li precipitates has a pronounced effect on its corrosion resistance. The corrosion resistance of Weldalite 050 compares favorably with that of alloys 5052 and 5054, wrought alloys 6061 and 6013, and silicon carbide (SiC) reinforced alloys 6061 and 6013.     

1Cr18Ni9Ti不锈钢的马氏体相变量与孔蚀敏感性的相关性研究

研究了AISI321亚稳态奥氏体不锈钢(1Cr18Ni9Ti)在-70℃(液氮气氛)经不同程度拉伸形变得到的含有不同α′-马氏体的试样在中性含氯离子介质中,材料的马氏体相变量与孔蚀敏感性的关系.孔蚀击穿电位、孔蚀诱导期和孔数的测试结果均表明:当α′-马氏体含量约小于5%和大于15%时,经形变诱发马氏体相变的1Cr18Ni9Ti奥氏体不锈钢在中性NaCl溶液中,孔蚀敏感性随α′-马氏体含量的增加而增大;当α′-马氏体含量在5%～15%范围内时,材料的孔蚀敏感性随α′-马氏体含量的增大而降低.     

X70管线钢在近中性及高pH值溶液中的电化学行为和SCC敏感性

采用动电位极化曲线测试法研究了温度、通气条件和pH值对X70管线钢在NS4溶液和0.5 mol/LNa2CO3 1 mol/L NaHCO3溶液中的电化学极化行为的影响,并用慢应变速率试验(SSRT)研究了X70管线钢在这些溶液中的应力腐蚀破裂(SCC)敏感性。结果表明,X70管线钢在NS4溶液中不出现活化—钝化转变区,随外加电位负移,SCC敏感性增加,表现出氢致破裂(HIC)的特征;在0.5 mol/L Na2CO3 1 mol/L NaHCO3高pH值溶液中出现活化—钝化转变区,在阴极极化区,也表现出氢致破裂(HIC)的特征,但在阳极极化区,发生的是阳极溶解型应力腐蚀破裂(ADSCC)。     

羊奶粉生产环节阪崎肠杆菌分离鉴定及其毒力基因和药敏检测

目的:分析羊奶粉生产环节阪崎肠杆菌的污染状况,分离株毒力基因携带情况以及耐药性。方法:采自某羊奶粉加工厂空气过滤车间、液态奶车间、流化床车间、喷雾干燥车间和包装车间的生产样品及环境样品共180份,按国标GB4789.40-2010和PCR方法进行阪崎肠杆菌的分离鉴定;采用PCR方法检测cpa、hly、sip和omp X毒力基因;采用琼脂稀释法测定药敏性。结果:27个采样点中有14个阪崎肠杆菌阳性点,检出率为51.9%;180份样品中有29份检出阪崎肠杆菌,污染率为16.1%;阳性样品主要为粉状和棉签涂抹样品,污染率分别为23.5%和16.9%。毒力基因检出率为100%,毒力基因类型有cpa-omp X和cpa-hly-omp X,检出率分别为79.3%,20.7%。29株菌对利福平、甲氧苄啶/磺胺甲恶唑、头孢西丁钠、阿莫西林、阿莫西林/克拉维酸的耐药率依次为100%,75.9%,6.9%,3.4%和3.4%;对其它11种抗生素均敏感,多重耐药率为6.9%。结论:羊奶粉加工厂存在阪崎肠杆菌的污染。空气流动、粉尘污染、操作人员交叉污染及生产设备清洗消毒不彻底可能是加工过程中该菌的污染途径。分离株毒力基因携带率较高,对大多数供试抗生素敏感,出现多重耐药现象。     

基于C8051F045单片机的轮速测量电路设计

介绍了基于C8051F045单片机的轮速测量电路,该电路采用磁敏式传感器SDI-H采集脉冲信号,将经信号处理电路处理后的2路脉冲方波鉴向后送入单片机计数,得出轮速信息,最后通过CAN总线通信在上位机上显示。实际应用表明,该测速电路具有良好的稳定性。     

[110]晶向近本征硅单晶双光子吸收各向异性

以沿[110]晶向切割的近本征硅单晶为样品,通过研究样品对连续波固体激光器所产生的1.3μm的近红外光的双光子吸收所诱导的光电流对入射光偏振方向的依赖关系,研究了双光子吸收的各向异性.测得了硅单晶对该波长的光的三阶极化率张量χ(3)的各向异性系数为-0.25,两个独立分量的比值χxxxx/χxxyy的幅度为2.4,并基于前期工作所得的χxxyy的结果,进而确定了另一分量χxxxx的值大约为1.49×10-19m2/V2.