火烧驱油物理模型的研究及应用

为配合火烧驱油的矿场试验 ,胜利油田有限公司采油工艺研究院研制了火烧驱油物理模型。模型主要由模型本体、注气系统、注水系统、油气分离系统、测量与控制系统 5部分组成。大量的室内和矿场模拟试验表明 ,这种物理模型具有立式和卧式模型两种功能 ,可模拟不同地层条件下湿式和干式火烧驱油试验。分析研究模拟试验数据不仅可加深对火烧驱油机理的认识 ,而且对现场火烧驱油试验具有指导意义     

储层石蜡沉积预测技术研究与应用

在油田开发过程中 ,由于油藏温度、压力等条件的变化 ,高含蜡原油在近井带容易产生石蜡沉积 ,堵塞地层孔隙或裂缝 ,严重影响油田开采 ,尤其对于低渗油田 ,伤害特别严重。文中应用理想溶液理论、质量守恒和能量守恒等基本原理 ,建立更符合油田实际情况的油藏中石蜡沉积预测数学模型 ,开发一套方便实用的油藏中石蜡沉积预测软件系统FPOS1 0。在此基础上 ,应用室内实验数据和现场数据对吉林新民油田油井石蜡沉积情况进行预测和现场拟合 ,确定新民油田临界石蜡沉积半径为 2 5m ,快速、准确地为现场清防蜡措施提供理论依据。     

Oxidation behavior of silicide coating on Ti3SiC2-based ceramic

A silicide coating was prepared on Ti₃SiC₂-based ceramic by pack cementation to improve the oxidation resistance of Ti₃SiC₂, which is a technologically important material for high temperature applications. The microstructure, phase composition and oxidation resistance of the coated sample were investigated. The results demonstrated that the silicide coating was mainly composed of TiSi₂ and SiC. A single layer of a mixture of SiO₂ and TiO₂ was formed on the surface of the coated sample during isothermal oxidation at 1100 °C and 1200 °C for 20h. Compared to Ti₃SiC₂, the parabolic rate constant of silicide coated Ti₃SiC₂ decreased by 2~3 orders of magnitude. Furthermore, the coated sample showed much better cyclic oxidation resistance than Ti₃SiC₂ during the cyclic oxidation at 1100 °C for 400 times. However, during the preparation of the coating, a number of fine cracks formed in the outer layer of the coating. When these cracks penetrated the whole coating during the cyclic oxidation, the oxidation rate was accelerated, which degraded the oxidation resistance. Electronic Publication     

CDMA时变色散信道的两级盲辨识算法

本文通过对时变信道的扩展函数在时频域进行正则采样，得到了CDMA时变系统的离散正则模型。针对该模型提出了一种具有较低运算量的两级盲辨识算法。为避免两级算法产生的误差传播效应，文章将理想SIMO模型等效为加性噪声模型来处理。与基展开模型方法相比，该算法具有不需利用观测数据的高阶统计量估计展开基频率的优点。文章通过仿真验证了该算法是可行的。     

码头建筑物对水位影响的模型试验及计算方法

河岸码头建筑物势必导致其上游水位壅高及对码头附近水流流态产生影响。以汉江沙洋河段为对象 ,通过定床概化物理模型试验研究了码头建筑物对河道水位与流速场的影响。并基于能量平衡原理 ,采用河道恒定非均匀流水面曲线基本方程 ,结合物理模型试验资料 ,计算了码头建筑物附近的水位变化值 ,并提出了码头建筑物产生的水位壅高值的计算方法。     

双螺杆反应挤出模型的研究

详细研究了双螺杆中反应挤出聚合物的动力学模型、流动模型和传热模型。通过实验得到了双螺杆反应器中聚合物的停留时间分布及平均停留时间。     

Lyapunov‐stable discrete‐time model reference adaptive control

Discrete‐time model reference adaptive control (MRAC) is considered with both least squares and projection algorithm parameter identification. For both cases complete Lyapunov proofs are given for stability and convergence. The results extend the approach of Johansson (Int. J. Control 1989; 50 (3):859–869) to include Lyapunov stability for MRAC when the normalized projection algorithm is used for parameter identification. Copyright © 2005 John Wiley & Sons, Ltd.     

固液相变蓄能的数学模型和自然对流换热系数的实验研究

引入自然对流换热系数 ,将固液蓄能数学模型简化为仅用能量方程加以描述。并通过实验测得相变过程的实际温度场 ,证明了自然对流固液相变换热的影响不可忽略 ,验证了固液相变界面移动速率随自然对流换热系数的增大而增大的定性关系     

DRYING OF GRANULAR PARTICLES IN A MULTISTAGE INCLINED FLUIDIZED BED WITH MECHANICAL VIBRATION

A mathematical model for the drying rate of granular particles in a multistage inclined fluidized bed(IFB) is presented from the standpoint of simultaneous heat and mass transfer, with taking the effect of mechanical vibration added vertically into consideration.

Steady-state distributions for the temperatures and concentrations of the particles and the heating gas, and for the moisture content of the particles are numerically calculated based on the present model. The calculated results show fairly good agreement with the experimental data, which were obtained from the drying experiments of brick particles in a three-stage IFB using comparatively low temperature air(40-60°C) as the heating gas.

It has been found within the range of the experimental conditions employed that, the mechanical vibration added vertically enhances the over-all drying rate of the particles and its effect can be considered equivalent to an increase in the air velocity.