In-chain functionalization by alternating anionic copolymerization of styrene and 1-(4-dimethylaminophenyl)-1-phenylethylene

Anionic copolymerizations of styrene (M₁) with excess 1-(4-dimethyl-aminophenyl)-1-phenylethylene (M₂) were conducted in benzene at 25°C for 24h, using sec-butyllithium as initiator. Narrow molecular weight distribution copolymers with M?;_n = 16.1 × 10³ g/mol (M?_w/M?_n = 1.04) and 38.2 × 10³g/mol (M?_w/M?_n = 1.05), and 24 and 38 moles of M₂ per macromolecule, respectively, were characterized by size exclusion chromatography, ¹H NMR spectroscopy and DSC. The monomer reactivity ratio, r₁ = 5.6, was obtained from the copolymer composition at complete consumption of M₁, assuming that the rate constant k₂₂ =0,i.e. r₂ =0. The polymers exhibited T_g values of 128 and 119°C, respectively, which correspond to an estimated T_g = 217°C for the hypothetical homopolymer of M₂.     

宣钢近北庄铁矿露采边坡稳定的结构分析

以宣钢近北庄铁矿露采边坡稳定性研究为例，说细说明了岩体结构分析方法的应用。     

地应力及其测量法简介

地应力对工程岩体的稳定性影响很大，工程实践中常需定量地确定工程范围内的地应力。本文简要地介绍了地应力的概念、应用及常用的测量方法。     

OFDM技术及其应用

首先对OFDM的发展以及应用做了简要的介绍,然后讨论了当前OFDM研究过程中的两个关键技术问题,最后展望了OFDM的未来发展。     

Dynamic analysis and drilling degrees of freedom

Finite element methods for dynamic analysis employing elements with drilling degrees of freedom are presented. The formulation is based on a variational principle in which displacements and rotations are interpolated independently. The issue of zero masses corresponding to rotational degrees of freedom is addressed and techniques for defining consistent and lumped rotational mass matrices are presented.     

八钢高炉无料钟炉顶的装料制度

以八钢高炉炼铁实践为依据，系统研究和分析了八钢2号和3号高炉炉顶设备装料制度对高炉冶炼的影响。认为高炉操作制度是当前高炉炼铁的主要技术之一，也是影响高炉焦比主要技术经济指标的重要因素。在原燃料和装备水平一定的条件下，合理的操作制度对高炉的技术经济指标起到决定性的作用。     

Evaluation of a system of wind tunnels for field studies of ammonia loss from grassland through volatilisation

Rates of ammonia (NH₃) loss from a ryegrass sward measured using a system of small wind tunnels were compared with concurrent measurements made using a micrometeorological mass balance method. Measurements were made during two experiments within a circular plot (radius 10m) treated with urea at a rate of 200kgNha^?1. In the first experiment, air speed through the tunnels was adjusted as necessary to maintain a value of approximately 1ms^?1. This value differed on most occasions from the mean ambient wind speed which was measured at a height of 250mm and which ranged from 0.61 to 2.95ms^?1. Rates of loss measured using the wind tunnels differed by a factor of between two and five from those measured using the mass balance method; there was no consistent pattern in the differences between the rates of loss. The total losses of NH₃ measured during 15 days were equivalent to 49.1 and 30.2kg Nha^?1 for the mass balance and wind tunnel methods, respectively. In the second experiment, air speed through the tunnels was adjusted as necessary to maintain a value as close as possible to the mean ambient wind speed measured at a height of 250mm. Rates of NH₃ loss measured using the two methods did not differ significantly; total losses of NH₃ during 17 days were equivalent to 96.9 and 101kg Nha^?1 for the mass balance and wind tunnel methods, respectively. The difference between the findings of the two experiments could be attributed to the direct effect of air speed through the tunnels rather than to differences between ambient temperatures and those inside the tunnels. During and following periods of rain the rates of loss measured using the tunnels were up to six times greater than those observed with the mass balance method. Rates of loss measured by the two methods became similar again when the tunnels were moved following rain. The study demonstrates that enclosures can be designed and operated to provide reliable measurements of the rate of NH₃ loss from grassland. Potential applications of the two methods are discussed.     

济钢350m^3高炉高富氧生产技术

分析了济钢350m^3高炉高富氧对产量,理论燃烧温度,炉况顺行状况,焦比和生产效益的影响,高富氧可提高产量,但升高焦比和高炉理论燃烧温度,一定程度上影响高炉顺行,存在富氧效益最大化的适宜富氧率.高炉生产应低富氧高喷煤,根据钢目前的情况,富氧率经2%-3%为宜.     

A Dynamic Dictionary for Priced Information with Application

In this paper we design a dynamic dictionary for the priced information model initiated by Charikar et al. Assume that a set S consisting of n elements is given such that each element has an associated price, a positive real number. The cost of performing an operation on elements of S is a function of their prices. The cost of an algorithm is the sum of the costs of all operations it performs. The objective is to design algorithms which incur low cost. In this model we propose a dynamic dictionary, supporting search, insert and delete, for keys drawn from a linearly ordered set. As an application we show that the dictionary can be used in computing the trapezoidal map of a set of line segments, a fundamental problem in computational geometry.     

Evaluation of the reactivity of titanium with mould materials during casting

A methodology for evaluating the reactivity of titanium with mould materials during casting has been developed. Microhardness profiles and analysis of oxygen contamination have provided an index for evaluation of the reactivity of titanium. Microhardness profile delineates two distinct regions, one of which is characterised by a low value of hardness which is invariant with distance. The reaction products are uniformly distributed in the metal in this region. The second is characterised by a sharp decrease in microhardness with distance from the metal-mould interface. It represents a diffusion zone for solutes that dissolve into titanium from the mould. The qualitative profiles for contaminants determined by scanning electron probe microanalyser and secondary ion mass spectroscopy in the as-cast titanium were found to be similar to that of microhardness, implying that microhardness can be considered as an index of the contamination resulting from metal-mould reaction.