羟甲基共聚酰胺的制备和研究

以甲酸为催化剂，甲醛与共聚酰妥ＰＡ（６／１０１０）缩合，制备羟甲基聚酰胺。利用小角激光散射、ＤＴＡ谱图，比民阻、接触角测定、应力－应弯曲线粘接试验等手段对其进行了研究。羟甲基以后，共聚酰胺的结晶形态发生了变化，熔点下降，断裂力降低但亲水性提高，对铝材的粘接力增大。通过对其固化体系和固化条件的调整，可以增加固化程度并强化对铝材的粘接能力。     

多羟甲基酚多丙烯酸酯的合成及其耐温性能研究

本文合成了新型耐温活性预聚体多羟甲基酚多丙烯酸酯,并考察了pH值,丙烯酸量,反应时间、反应温度、催化剂用量等因素对反应产率的影响。测试了固化物的TCA和DTA及力学性能,并用红外光谱确认主产物。     

聚醋酸乙烯酯乳液胶粘剂的改性研究

介绍了醋酸乙烯酯-丙烯酸酯多元共聚乳液的合成工艺,讨论了单体组成、乳化剂组成、反应温度等对乳液性能的影响。     

纸品乳液的研制

以丙烯酸酯及苯乙烯为单体 ,采用复合乳化剂合成了一种低固含量的苯丙乳液 ,作为涂布纸涂层胶粘剂 ,降低了生产成本。本文讨论了该胶粘剂的合成工艺、引发剂、乳化剂、活性添加剂等组份对胶粘剂性能的影响。     

石蜡改性热熔胶的研究

本文介绍了一种石蜡改性热熔胶的配方和性能，实验结果表明：用于实型铸造的效果明显地优于现有的几种粘接剂。     

A Thermo-Mechanical Study of Some Epoxy Adhesives Subjected to Combined Dynamic and Static Stresses

The object of the present study was to investigate the effect of superimposed dynamic and static stresses on mechanical and thermal properties of some epoxy adhesives. It was found that combinations of shear creep and torsional oscillations, applied simultaneously to adhesive joints at temperatures within the glassy range of the adhesive, led to strengthening of the joints in shear and to an increase in the glass transition temperature of the adhesive. Similar loading stresses applied at temperatures close to the T_g of the adhesive, led to opposite effects on the above mentioned properties of the joints. The width of the glassy-rubbery transition of the adhesives increased, in the whole range of temperatures used in this study and for all epoxy compositions, as a result of subjecting the joints to superimposed dynamic and static stresses. The broadening of the glass transition was interpreted as a result of the stiffening of polymer network during the combined stressing experiments. A linear relationship was found between the area of endothermal peaks in the first DSC scan of specimens subjected prior to test to superimposed dynamic and static stresses at temperatures below T_g, and the shear strength of the joints. In agreement with this observation and with literature data, a linear relationship was revealed also between the glass transition temperature of the resins (measured in the first DSC scan) and the shear strength of the joints. Based on experimental observations and on some literature information, it was suggested that the strengthening of the joint, as well as the changes in thermal properties of the adhesives, are mainly due to physical processes, such as short-range orientation of network chains and an increase in intermolecular interaction between highly polar sites of the network. The possibility that superimposed stressing led to changes in chemical crosslinking was discussed but it seems that no such reactions occurred.     

CJ91胶粘剂在螺旋振动光整机中的应用

螺旋振动光整机槽内壁的橡皮保护层由于老化及磨损等原因出现裂口甚至脱落现象，严重影响设备的使用寿命和闸把壳体的外观质量。通过分析和试验筛选出螺旋振动光整机的理想胶粘荆——CJ91胶粘剂并介绍了粘接修补工艺。     

混炼硅橡胶的配合技术(八)

介绍了2种汽车部件（密封图、汽车挡风玻璃刮片）装配用混炼硅橡胶的配制，以及硫化过程中能与接触基材粘接的混炼硅橡胶（通过添加各种增粘剂如含乙烯烃碳酸酯基或巯基乙酸酯基化合物、烷氧基硅烷、含乙烯基硅官能基过氧化物为硫化剂）的配制。     

反应性乳化剂应用于丙烯酸酯类乳液压敏胶的研制

使用正交试验法设计压敏胶配方,得到用反应性乳化剂参与的AA、HEA、BA和EA、M AA等多元共聚物乳液,研究该聚合物应用于压敏胶的初粘、持粘、剥离强度等力学性能。结果表明,在该体系下引发剂用量、反应温度、AA、反应性乳化剂用量对压敏胶乳液综合性能关系密切,其它各因素影响不明显。得到的优化配方为BA(83%)、AA(1%)、HEA(1%)、MM A和EA的混合单体(15%)。