碱性电镀光亮锌镍合金研究

研究了镀液的组成与镀层中镍含量、镀层的相结构以及阴极电流效率的关系。提出了碱性电镀光亮锌镍合金的最佳镀液组成和工艺规范,并对茴香醛、四乙烯五胺和ZN—A5添加剂的吸附行为及其对锌镍电沉积过程的阻化作用进行了探讨。     

薄带连铸技术的发展现状与思考

综述了钢的薄带连铸及铝合金的薄带铸轧发展现状,简要介绍了在高速钢、硅钢和镁合金的薄带连铸实验研究方面取得的进展.认为钢的薄带连铸技术近年取得了重要突破,未来10年薄带连铸技术可能快速发展;发展特殊性能或难加工合金的薄带连铸可充分发挥快速凝固的优势;采用立式双辊法可望进一步提高铝合金的浇铸速度,特别是高牌号铝合金的浇铸速度;应积极发展镁合金的薄带连铸技术,以改善镁合金板材的塑性加工及耐腐蚀问题.     

我国超细粉碎与超细分级技术的现状及问题

近年来 ,我国的超细粉碎与超细分级技术有很大的发展 ,但在发展过程中存在着一些问题。超细粉体涉及的行业众多 ,但对其粒度的分类至今国内尚无定论。通过调研 ,分析了目前国内超细粉碎设备的现状。对超细粉体分级技术中的干法分级和湿法分级作了比较全面的介绍 ,并对我国超细粉碎与超细分级技术的发展提出了建议     

Humidity Sensor Characteristics of Woodceramics

The humidity sensor characteristics of Woodceramics were investigated. The Woodceramics used in this experiment were prepared at 650–900°C. The size of specimens selected was 1 × 1 × 10 mm . One was used as-cut and the other was polished. Above 700°C, the resistance of the specimen was below 50 and the decrease of resistance with increasing relative humidity was small. The specimen prepared at 650°C had a resistance of about 1 k. The resistance of as-cut specimens decreased with increase in relative humidity, but that of the polished specimen did not change significantly. The difference between as-cut and polished samples was explained by the differences in surface micro-structure.     

活性炭对海水中硼的吸附研究

未处理的生活污水和海水中均含有一定量的硼，给人们的生产和生活带来严重影响，因此，微量硼的分离与去除意义重大。利用活性炭吸附法吸附溶液中的微量硼，对其影响因素如接触时间、吸附质质量浓度、pH、吸附剂量及温度等进行了研究，并对比了动静态吸附及酸碱再生效果，确定了适宜的实验条件。应用该法吸附某海水中的微量硼，其一次除硼率可达90％以上，硼质量浓度达到WHO规定饮用水的要求。     

壳聚糖及其衍生物对钙离子的吸附性能

利用壳聚糖及相应衍生物在不同pH值和反应时间等条件下对Ca^2 吸附性能进行表征，得到经不同化学改性的壳聚糖衍生物对Ca^2 吸附能力变化的有关信息。     

The dynamic adsorption of benzene vapor on the ACF activated by phosphoric acid

The dynamic adsorption behaviors of benzene vapor on phosphoric acid‐activated carbon fiber (ACF‐P) were investigated by gas chromatography. The experimental results showed that ACF‐P that was activated at >350^°C, like steam‐activated carbon fiber (ACF‐W), has good dynamic adsorption properties for benzene vapor. However, the saturation adsorption capacities of ACF‐P and ACF‐W are different. The dynamic adsorption conditions apparently do not affect the effluent concentration before the breakthrough point, but do change the operation loading and usage efficiency. The adsorbed ACF‐P can be regenerated, and good dynamic adsorbability can be recovered by heating treatment. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 83: 1841–1847, 2002     

Lead recovery from aqueous environment by using porous carbon of citrus fruits waste: equilibrium,kinetics and thermodynamic studies

ABSTRACT

The mixture of citrus fruits (orange, grapefruit, mandarin, and lemon) wastes was utilized to obtain high surface area activated carbon (AC) by H₃PO₄ activation. The production conditions were optimized and the optimum conditions were determined. The optimal-activated carbon (CFWAC) was characterized by various physicochemical techniques. CFWAC was also used as a sorbent for Pb (II) ions from water. Batch experiments were performed to explore the adsorption capacity and mechanism. The Langmuir isotherm and pseudo-second-order kinetic model showed good fitness to the experimental data. The maximum Pb (II) adsorption capacity of CFWAC was found to be 163.93 mg/g.     

表面有机化钛酸材料的制备及吸附染料性能

将K2CO3和TiO2通过高温固相反应制得K2Ti4O9,经酸化处理后得到H2Ti4O9,用正十二胺乙醇溶液与之反应,获得正十二胺柱撑的层状化合物,采用X射线衍射(XRD)、红外光谱(IR)等方法对所得材料进行结构表征,并初步研究了有机胺支撑前后钛酸材料的吸附性能,实验结果表明:在钛酸钾材料的层间引入正十二胺有机基团后,层间距加大,吸附能力大大提高。     

高炉用石墨砖的现状及问题

介绍了近年来我国高炉用石墨砖的进展和存在的问题，提出了高炉用石墨砖的改进方向。