Solar Photocatalytic Degradation of Textile Dyes in TiO2 Suspended Solutions

The degradation and decolourization of direct dye (Everdirect supra turguoise blue, FBL), acidic dye (Isolan orange S-RL) and vat dye (Indanthren red FBB) have been investigated by solar/TiO2 process. The effects of solution pH, dye concentration, dosage of TiO2 and nano-size of TiO2 have been studied. The increase in initial pH (3, 5 and 11) and dye concentration decrease the removal rate. The treatment for FBB and FBL dye solutions is more efficient than that of S-RL.Under optimum conditions, the color removal is found to be almost complete for FBB and FBL while that of S-RL also reaches 95%. Langmuir adsorption isotherm and modified Langmuir-Hinshelwood kinetic model (L-H model) have been fitted to the experimental data and found to correlate the adsorption patterns as well as the kinetics of the dyes studied.     

Micropore characterization using the Dubinin-Astakhov equation to analyze high pressure CO2 (273 K) adsorption data

The characterization of the pore structure of microporous materials is of interest because of the usefulness of these materials in many applications. Of these, the characterization of carbon adsorbents is particularly problematic because of the presence of small pores with size on the order of small molecules (micropores) along with a wide distribution of pore sizes, and their non-crystalline structure. In this paper, we present results obtained using the Dubinin-Astakhov equation to analyze data from high pressure CO₂ adsorption at 273 K to characterize two sets of microporous carbons. Our results support the conclusions of previous workers that the Dubinin-Astakhov (DA) equation is able to linearize adsorption data that gives rise to curved Dubinin-Radushkevich plots. However, when applied over different ranges of relative pressure on the adsorption isotherm, the Dubinin-Astakhov plots result in different values of micropore volume and characteristic adsorption potential. Furthermore, DA analysis of CO₂ (273 K) adsorption data over a wide range of pressures (10^–3–22000 Tort), gives results different from DA analysis of CO₂ (273 K) isotherms measured at low pressures only (10^–3–830 Tort). It would appear desirable to apply the DA equation to data that reflects the entire range of micropore filling on the adsorption isotherm, as opposed to data over a limited relative pressure range. For CO₂ adsorption at 273 K, this would necessitate adsorption studies at high pressures, to about 28 atm. Micropore volumes obtained in this manner, agreed with the total pore volumes determined by nitrogen (77 K) adsorption for all the activated carbons studied.     

聚苯胺/涤纶导电织物再掺杂及洗涤性能的研究

采用现场吸附聚合法制备了聚苯胺 /涤纶导电织物 ,采用不同种类的酸对其进行再掺杂 ,研究了酸的种类对织物导电性能的影响 ,并对导电织物进行了洗涤实验及洗涤牢度实验。结果表明 :无机酸对导电织物的掺杂效果优于大多数有机酸。导电涤纶织物的导电性能受洗涤液酸碱度的影响 ,其中碱性洗涤液使导电性能降低 2个数量级 ,酸性洗涤液使导电性能下降 1个数量级 ,而且聚苯胺在涤纶织物表面具有良好的附着性     

由吸附等温线分析膨润土的分形孔隙

膨润土是一种多孔的粘土材料，对气相和液相中的污染物均有很好的净化效果。为了了解其对气体的吸附性能，用氮气吸附等温线分析了2种膨润土和1种活性白土的BET比表面积和孔隙分布，并应用基于FHH模型的方法计算了它们的分形维数。结果表明，普通膨润土的分形维数接近2，而活性白土的达到了2．59。讨论了孔隙度、比表面积以及分形维数等参数与吸附量的关系，表明分形维数更能反映膨润土对气体的吸附性能。     

PAMAM接枝稻草对Nd3+、Sm3+、La3+的吸附特性

以环氧氯丙烷为交联剂,将聚酰胺胺树状大分子(PAMAM)接枝到稻草基体上,利用FTIR、SEM、XRD、TG等对其结构进行了表征和分析。考察了其对Nd~(3+)、Sm~(3+)、La~(3+)稀土金属离子的吸附性能,探讨了吸附时间、稀土金属离子浓度、吸附温度、溶液pH等因素对吸附性能的影响。同时对吸附过程的动力学、吸附等温线和吸附热力学进行了研究。结果表明,所制备的吸附剂对Nd~(3+)、Sm~(3+)、La~(3+)稀土金属离子的吸附平衡时间约为4 h,平衡吸附量分别为47.14、40.11和50.12 mg/g。吸附过程符合拟二级动力学模型和Freundlich等温线,表明此吸附过程是属于化学吸附过程。吸附热力学研究表明,此吸附过程是自发进行的,同时吸附过程是一个混乱度增加的熵增过程。     

安吉蒙脱石对抗菌金属离子的吸附容量研究

研究了安吉蒙脱石对抗菌金属离子Ag 、Zn2 及Cu2 的吸附反应容量 ,发现安吉蒙脱石对抗菌金属离子的吸附等温线可用Freundlich方程加以拟合。抗菌金属离子按照其吸附容量大小的排列次序为Cu2 >Zn2 >Ag ,此次序由三种离子的水化热、离子半径及价态所决定。     

防灰雾剂对T-颗粒乳剂晶体表面形貌的影响

应用原子力显微镜对硫加金化学增感后的T-颗粒掺杂乳剂晶体表面形貌进行观察，直接测得了晶体颗粒的大小和厚度．颗粒表面精细结构观察显示样品表面并不平整，存在很多突起．这些突起呈线形平行排列，接近网格状．经曝光后突起变得更高，更集中．表面吸附足量的防灰雾剂后，晶体表面突起不明显．曝光后表面高度变化不大．     

13X沸石吸附处理水中苯胺的性能及应用

用天然岩石矿物为原料，经过较简单的工艺过程合成13X沸石去除水中苯胺，模拟废水的实验结果表明：沸石对苯胺的吸附速率非常快，吸附时间为10min时，吸附基本达饱和；一般当沸石用量为10g/L时，水蝇苯胺的吸附率达95％，随着pH值的增加，苯胺在沸石上的吸附率较小；温度增加，吸附率有所增加。但常温下，苯胺的吸附率也能达到93％，13X沸石对苯胺的最大吸附量可达10mg/g，其吸附规律较好地符合Freundlich吸附等温式，饱和了苯胺的沸石，用质量分数为20％，温度为60℃的氯化钠溶液洗脱，解吸率近于100％，且解吸后的沸石在未经任何处理的情况下仍能吸附苯胺；对实际苯胺废水的处理结果，也表明13X沸石不仅可有效地去除苯胺，还可以有效地去除废水中的SS，CODCr，氨氮及油等。     

石英晶体微天平的研究进展综述

石英晶体微天平(QCM)能够感知到纳克级的质量变化,在分析化学、电化学、有机化学、生物医学等方面得到了广泛的应用。根据与QCM电极表面相接触的研究介质即应用对象的不同,分别阐述了刚性薄层、牛顿流体、粘弹性膜层的基础方程、分析方法及应用,并探讨了其存在的问题与发展趋势。     

Preparation,characterization, and adsorption properties for metal ions of a novel chelating resin containing sulfoxide and diethylene glycol

A novel chelating resin containing sulfoxide and diethylene glycol, poly{4‐vinylbenzyl‐[2‐2‐(hydroxyethyl)ethoxyl]sulfoxide} (PVESO) was synthesized using chloromethylated polystyrene (PS‐Cl) as material. Its structure was characterized by elemental analysis, infrared spectra, and scanning electron microscopy (SEM). The adsorption capacities of the resin for Hg²⁺, Ag⁺, Cu²⁺, Zn²⁺, and Pb²⁺ at various pH values were determined. The maximum adsorption capacities for Hg²⁺ and Ag⁺ were 1.56 and 0.75 mmol g^?1 respectively. The resin had high selectivity for Hg²⁺ and Ag⁺ over the pH range 1.0–7.0. The adsorption capacities for Hg²⁺ and Ag⁺ under competitive condition were also determined by batch experiment method. In addition, the adsorption kinetics of the resin towards Hg²⁺ at different temperatures was also investigated. The results showed that the adsorption rate was governed by film diffusion at 20°C and 25°C, by particle diffusion at 30°C and 35°C. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 102: 6054–6059, 2006