Acid-Base Properties of Zirconium, Cerium and Lanthanum Oxides by Calorimetric and Catalytic Investigation

The combined use of calorimetric and catalytic methods for the investigation of the acid-base properties of oxide systems is discussed with reference to the authors' work on pure and doped zirconia samples, ceria-zirconia and ceria-lanthana solid solutions. Adsorption microcalorimetry of ammonia and carbon dioxide had been used to characterize the samples, whose chemical and thermal history was taken into account. The catalytic behavior of these samples in the conversion of 4-methylpentan-2-ol, route to 4-methylpent-1-ene (starting product for the manufacture of polymers of superior technological properties), had also been studied. On the basis of the calorimetric data, a rationale for interpreting the data for the transformation of 4-methylpentan-2-ol is formulated, which takes into account the role of the concentration and strength of the sites in governing the competition among the various mechanisms for dehydration and dehydrogenation.     

Binding of several heavy metal ions by polyaspartyl polymers and their application to some Chinese herbal medicines

Water‐insoluble polyaspartyl polymers were synthesized by using water as medium instead of organic medium. Taking Ca²⁺ as a reference, the binding of several heavy‐metal ions, including Pb²⁺, Cd²⁺, Hg²⁺, Cr³⁺, Cu²⁺, and Mn²⁺, by polyaspartyl polymers was studied. The experimental results revealed that polyaspartate is an excellent binding agent for the investigated heavy‐metal ions. These cation ions were bound to polyaspartate polymer by the same mechanism as Pb²⁺, which can be explained by ion exchange model. Since polyaspartate has a protein‐resembling structure that is sensitive to trace heavy metal, it was used to remove some trace heavy‐metal elements in Chinese herbal medicines. It was found that polyaspartate material was an effective agent for the removal of Pb²⁺, Cd²⁺, and Hg²⁺ ions from glycyrrhizin, angelica, and gynostemma pentaphyllum. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 2007     

氧化铝上吸附平衡与动力学的分形特性

在实验测定氧化铝吸附氮气的平衡和动力学过程的基础上 ,由平衡数据得到分形维数 ,对动力学结果分别用欧氏几何和分形几何的动力学模型进行处理 ,比较两种方法得到的扩散系数之间的差别。结果表明 :粉状氧化铝的分形维数为 2 .12 ;采用分形动力学模型得到的扩散系数同欧氏几何扩散模型的结果不一样 ,扩散系数不随浓度的变化而改变 ;而欧氏几何扩散模型中的扩散系数随浓度变化发生改变 ,且变化符合Darken关系     

IN SITU SEPARATION OF ETHANOL DURING BATCH FERMENTATION WITH CO_2 STRIPPING AND ACTIVATED CARBON ADSORPTION

In situ separation of ethanol during batch fermentation with CO_2 stripping and activated carbon adsorption was studied. The higher initial glucose concentration and fermentation rate were reached due to the elimination of ethanol inhibition on the cell growth by means of CO_2 stripping. The stripped ethanol vapor was selectively adsorbed by an activated carbon column. The conde(?)sate desorbed from the adsorption column can be higher than 50% by weight. Ar unstructured model was used to simulate the experimental data satisfactorily.     

Modification of the porosity of pillared clays by carbon deposition. I. Polymer carbonization

In order to use pillared clays (PILC) for selective adsorption, further modifications of the porous structure are necessary. The deposition of carbon residues onto the porous structure of pillared clays by the carbonization of polymers (polyvinylalcohol) was proposed to achieve a controlled modification of the pore size. Ti and Al-pillared clays (calcined and non-calcined) were impregnated with PVA (different grades and different concentrations and subsequently carbonized to form carbon phases. The effect of the carbon deposits on the porosity of Ti- and Al-PILC is discussed in terms of pore-blocking, pore-filling and pore-narrowing. The deposition of carbon using PVA resulted in a complete pore-blocking for Al-PILC and in a narrowing of the pore size distribution for Ti-PILC, without achieving a controlled pore-narrowing.     

Removal of formaldehyde at low concentration using various activated carbon fibers

Adsorption of low concentration formaldehyde on pitch‐based, rayon‐based, and PAN‐based activated carbon fibers (ACFs) and an unactivated PAN‐based carbon fiber (PAN‐CF) was investigated by a dynamic method. The pore structure and surface chemistry of these samples were characterized by liquid nitrogen adsorption, elemental analysis, and X‐ray photoelectron spectroscopy. Results revealed that the pore structure, especially surface chemical composition, greatly influence the formaldehyde adsorption. PAN‐based ACFs showed the highest formaldehyde adsorption capacity because there are more abundant nitrogen‐containing groups, especially pyrrolic, pyridonic, pyridinic, and quaternary on the surface. The breakthrough time and formaldehyde adsorption capacity of one kind of PAN‐ACF were 361 min and 0.478 mmol/g, respectively. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci, 2007     

壳聚糖对化学镀镍废液中Ni^2＋吸附

研究了用壳聚糖吸附化学镀镍废液中Ni^2＋的最佳条件及其脱附和再生方法，以及镀液中络合剂等其他组分对吸附率的影响。结果表明，壳聚糖对化学镀镍废液中的Ni^2＋具有较好的吸附能力，pH是影响吸附的主要因素。在室温、pH=5．0时，Ni^2＋质量浓度为4．6952g／L的化学镀镍废液被0．9390g壳聚糖吸附2h后，Ni^2＋的去除率达72．25％。     

表面改性活性炭对饮用水中THMs吸附性能研究

通过对活性炭的表面改性，并对氯化消毒后的高色度水进行吸附处理，可使其三氯甲烷（THMs)的含量降低到44μg/dm^3，达到国家生活饮用水质标准。     

Different support effect of M/ZrO2 and M/CeO2 (M = Pd and Pt) catalysts on CO adsorption: A periodic density functional study

CO adsorption over Pd₄ and Pt₄ cluster supported by c-ZrO₂(1 1 1) and CeO₂(1 1 1) catalyst systems was investigated using periodic density functional method in order to clarify the support effect on CO activation. We found that the support increases the CO activation for bridge and three-fold sites but decreases for the atop site. Moreover, it was found that the support changes the site preference for the CO adsorption. Bridge site on both the Pt₄/c-ZrO₂ and Pt₄/CeO₂ show larger CO adsorption energies than those on the other sites while the atop site is energetically preferable on isolated Pt₄ cluster. c-ZrO₂ supported Pd shows the largest CO activation with large charge transfer from the catalyst to the CO molecule. This reveals that ZrO₂ supported Pd can be a good catalyst for CO activation because of its higher probability to the three-fold site CO adsorption. We also found that positively charged M₄ clusters on the support keep their strong electron-donating properties and have enough charge density to contribute to the activation of an adsorbed CO molecule by a charge transfer.     

Role of anionic and nonionic surfactants on the control of particle size and latex colloidal stability in the seeded emulsion polymerization of butyl methacrylate

The evolution of the main colloidal parameters in the seeded starved‐feed semi‐continuous emulsion polymerization of butyl methacrylate (BMA) was investigated, with the main purpose of assessing the effectiveness of the semi‐empirical relationship S = K · S_S · ΔA/A_S as a tool to define the surfactant/monomer feed ratio (∝ K) best suited to achieve a target particle size. In particular, the effect of the type and amount of surfactant [i.e., anionic, sodium dodecyl sulfate (SDS), or nonionic, Brij 58P] added during the semi‐continuous stage was considered. Coagulum formation was never observed under the adopted experimental conditions. To detect the occurrence of secondary nucleation or particle aggregation, or both, the particle size and number of particles, the surface tension and the particle surface coverage ratio were correlated. The best results were obtained with SDS and 0.8 ≤ K ≤ 3. In fact, under the selected experimental conditions, only with SDS did the number of particles remain nearly constant throughout the polymerization at the value defined by the seed latex; the particle size distribution was highly monodisperse, and the final particle diameter closely matched the calculated one (～ 120 nm). The above semi‐empirical relationship based on the adjustable parameter K was validated by running test polymerizations aimed at lattices with well‐defined particle size. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 102: 3083–3094, 2006