气干型不饱和聚酯树脂

气干型不饱和聚酯树脂是常温交联的热固性树脂。其性能优良，光泽度高，丰满度好，是优良的饰面材料。它的组成的原子灰，是理想的更新换代产品，广泛适合于金属基材的嵌填。     

Silver–carbon electrocatalyst for air cathodes in alkaline fuel cells

A method for producing electrocatalysts containing silver supported on different carbons was developed. The catalysts were investigated in air (oxygen) diffusion electrodes in alkaline electrolyte (7 M KOH). Depending on the carbon support used, up to a threefold improvement in electrode performance was achieved compared with the activity of the uncatalysed carbon in this media. At ambient temperature and atmospheric pressure, a current density of 150 mA/cm^–2 was obtained at electrode potential 1.2 V vs zinc (0.75 vs HE). A correlation between electro catalytic activity and wetted surface area of the electrocatalysts was found.     

Numerical study of the transfer of shock-wave loading to a screened flat wall through a layer of a powdered medium and a subsequent air gap

The two-velocity, two-temperature model with two stresses in a mixture of a gas and solid particles contacting each other is used to numerically study the dynamic effect of an air shock wave incoming onto a solid wall with a screening layer of a porous powdered medium at some distance from the wall. The process is described for the case of one-dimensional planar motion of the gaseous and disperse phases under the assumption of a viscoelastic behavior of the powder skeleton. The effect of stepwise shock waves onto the porous powdered screen is considered. The influence of parameters of the screening layer and the air gap on the dynamics of loading of the screened solid wall is analyzed. __________ Translated from Fizika Goreniya i Vzryva, Vol. 43, No. 1, pp. 132–142, January–February, 2007.     

CFD SIMULATION OF THE GAS-SOLID FLOW IN THE RISER OF A CIRCULATING FLUIDIZED BED WITH SECONDARY AIR INJECTION

A comprehensive investigation was carried out to study hydrodynamics aspects of secondary air injection in circulating fluidized beds. This article presents modeling and results of computational fluid dynamics simulations of gas-solid flow in the riser section of a laboratory-scale (ID = 0.23 m, height = 7.6 m) circulating fluidized bed with a radial secondary air injector. The gas-solid flow model is based on the two-fluid (Eulerian-Eulerian) approach, where both gas and solids phases are treated as interpenetrating continua. A granular kinetic theory model is used to describe the solids phase stresses. The simulation results are compared with measured pressure drop and axial particle velocity profiles; reasonable agreement is obtained. Qualitatively, excellent agreement is obtained in predicting the increase in solids volume fraction below secondary air ports, the accumulation of solids around the center of the riser due to momentum of secondary air jets, and the absence of the solids down-flow near the wall above the secondary air injection ports, which are the prominent features of secondary air injection observed in the experiments.     

Regeneration of zinc particles for zinc–air fuel cells in a spouted-bed electrode

Fuel cells wherein zinc particles form a negative electrode and a gas-diffusion electrode (air electrode) is the positive electrode, are under development. Such cells are dependent on the regeneration of the zinc particles (and electrolyte). This paper describes experiments on electrolytic cells equipped with spouted bed cathodes for use in this application. Experiments have been carried out on laboratory scale cells to determine the operability of cells for growing 'seed particles in the range from 0.4 to 1 mm to measure cell voltage and current efficiency (and thereby energy consumption rate), and to identify a suitable material that could be used as a diaphragm (separating the spouted bed from the oxygen evolving anode). A larger cell, capable of producing up to 10 kg Zn per day, was designed and built. The larger cell was run successfully fifteen times and showed cell voltages and energy consumption rates comparable with those of smaller cells.     

热媒炉热效率分析与提高

分析了影响热媒炉热效率的主要因素 ,介绍了通过对热媒炉盘管干冰除灰和改进风油比控制方式来提高热效率的方法 ,指出提高热媒炉热效率的主要途径是 :降低排烟温度和空气过剩系数。     

傅立叶变换红外光谱仪测定压缩空气中油的含量

介绍了傅立叶变换红外光谱仪（FTIR）测定压缩空气中油含量的方法，讨论了应用FTIR的注意问题。     

煤燃烧中NOx的来源和抑制其生成的有效措施

煤燃烧中产生的ＮＯ＿ｘ是不可忽视的大气污染源。根据其生成机理，它主要来自煤中氮的氧化以及高温下空气中Ｎ＿２和Ｏ＿２的反应。烟气中ＮＯ＿ｘ的浓度范围很宽，从２００至２５００ｍｇ／ｍ￣３，影响因素有燃烧温度、空气过剩系数、煤种和燃烧器类型等。在煤燃烧中采取适当措施，可以有效地降低ＮＯ＿ｘ浓度，如降低燃烧温度、分段燃烧、优化空气过剩系数、烟气部分循环和选用含氨量低的煤等。     

旋流器内空气核的形成机理和形状的实测研究

首次采用先进的高速摄象机对旋流器内空气核的出现、发展直至形成的整个过程以及形成后的形状进行了全面系统的实测研究。研究发现空气核的形成经历了孕育、发展及形成三个不同的阶段;在旋流器内不同的高度,空气核的形状有所不同,在底流口上端发生最大程度的偏摆,而在溢流管内出现类似“葫芦”形状;旋流器的进口流量和锥角对空气核的形成过程及形状尺寸有着重要的影响。空气核的形成运动过程为一随机过程,这是造成分离过程具有随机特性的主要因素之一。     

环己烷在Au-Co/SBA-15上选择性氧化的研究

以沉积-沉淀法制备了Au-Co/SBA-15催化剂,在没有任何有机溶剂或助剂的条件下,研究了以空气为氧化剂的环己烷选择性氧化。当Au-Co/SBA-15催化剂中金的质量百分含量为1.0%,催化反应在423 K 3.0 MPa下进行120 m in时,催化效果最好,此时环己烷的转化率为22.7%,环己酮和环己醇的总选择性为95.2%,酮醇比为2.9,且催化剂重复使用五次后活性基本不变。