Numerical simulation on the rheo-diecasting of the semi-solid A356 aluminum alloy

The effect of injection pressure, piston velocity, and the forming temperature of semisolid slurry on the filling behavior of the semi-solid A356 aluminum alloy was investigated by simulation methods. The simulation results show that these processing parameters have an important effect on the filling behavior of the semi-solid A356 aluminum alloy. The slurry flows steadily in the cavity when the injection pressure, the piston velocity, and the forming temperature are low, but it is prone to turbulent flow w...     

Microstructural characterization of as-cast and homogenized 2D70 aluminum alloy

The microstructure of the as-cast 2D70 aluminum alloy and its evolution during homogenization were investigated by means of optical microscopy (OM), scanning electron microscopy (SEM), energy dispersive spectroscopy (EDS), X-ray diffraction (XRD), and differential scanning calorimetry (DSC) analysis. The results indicate that the microstructure of the as-cast 2D70 aluminum alloy mainly consists of the dendritic network of aluminum solid solution and intermetallic compounds (Al2CuMg, Al2Cu, Al9FeNi, Cu2FeAl7...     

我国铝土矿资源开发利用现状及其产业研究

矿产资源是人类社会进步与经济发展的重要物质基础,也是可持续发展不可缺乏的重要资源,它的不可再生性和发展的可持续性要求我们必须以最小的能源消耗来实现最大化的经济发展.作者以铝土矿为例,对其资源开发利用情况及产业发展现状进行了研究.     

苯甲酰丙烯酸乙酯中主要杂质的定性分析与转化

顺丁烯二酸酐与苯在三氯化铝的存在下,经傅-克反应生成苯甲酰丙烯酸,在强酸性水介质中,若温度高于35℃,则部分发生与水的加成反应生成苯甲酰乳酸。含苯甲酰乳酸的苯甲酰丙烯酸在浓硫酸的存在下与无水乙醇反应,可分别生成苯甲酰丙烯酸乙酯和苯甲酰乳酸乙酯。而苯甲酰乳酸乙酯在二甲苯中回流可脱去一分子水而转变为苯甲酰丙烯酸乙酯,从而使苯甲酰丙烯酸乙酯的纯度从85%提高到93%。     

铝阳极氧化膜孔内电沉积银及其抗菌性能

Aluminum specimens were anodized in a sulfuric acid bath, then silver was electrodeposited in pores of the anodized aluminum by using alternating current . The anodized aluminum with deposited silver was testedfor its antibacterial performance. The results show that the antibacterial rates of the specimens are above 95% against the growth of E. coil, P. aeruginasa, S. faecalis and S. aurens. The morphology of the silver in pores of anodized aluminum is characterized by transmission electron microscopy, and the micrographs indicate that silver is assembled in the form of nanowires with a diameter of 10 nm or 25 nm. The nanowires have a structure of parallel bright stripes alternating with parallel dark stripes.     

Preparation and the properties of PMR‐type polyimide composites with aluminum nitride

A new polyimide composite was developed relying on the concept of in situ polymerization of monomer reactants polyimide. High thermal conductive, low dielectric constant and dielectric loss, and thermal‐stable composites were successfully demonstrated by incorporating aluminum nitride powder into the polyimide. The weight percent of aluminum nitride was up to 80%. The thermal and dielectric properties follow the classic composite theories. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 89: 3913–3917, 2003     

Oxidation behavior of Fe-20Cr-5Al rare earth alloys in air and synthetic exhaust gas

Fe-20Cr-5Al alloy foils are used in automotive catalytic converters. This work examines oxidation behavior of four production-processed alloy foils in both air and synthetic exhaust gas environments. Oxidation tests were performed between 750° C and 1150° C for times to 96 hrs. Weight gain results in both atmospheres were similar, an indication that the same mechanism controls oxidation in both environments. At high temperatures (>-950° C) both atmospheres produce weight gains consistent with -alumina growth. Activation energies of 323 kJ/gmole and 271 kJ/gmole were calculated for oxidation in air and synthetic exhaust gas, respectively. At lower temperatures (<-850° C), accelerated weight gains can occur from growth of transition alumina. Despite similar weight gain results, the two atmospheres produce different oxide morphologies: at 950° C and above, air produces a rounded, porous oxide while synthetic exhaust produces a more compact, angular oxide. Unexpectedly, oxide spalling occurred on foils oxidized in synthetic exhaust at 1050° C and above.     

Thermal expansion of an SiC particle-reinforced aluminum composite

Using a push-rod dilatometer, we measured between 76 and 390 K the thermal expansion of a particle-reinforced-composite wrought plate obtained by powdermetallurgy methods. The particles, 30% by volume, consisted of monocrystals of -SiC with sizes near 10 m. The matrix consisted of a 6061 aluminum alloy with original particle sizes near 20 m. We found the perpendicular thermal expansivity, ₃, higher by 26% than the in-plane thermal expansivity, ₁-₂. These values differ from a rule-of-mixture prediction by –3 and –23%, respectively. All three _i, components lie outside the Rosen-Hashin bounds. Levin's isotropic model agrees within 10% with the ₁-₂-₃ average. Both the anisotropy and the bounds violation result from microstructural nonhomogeneity arising from processing. Rosen and Hashin's transverse-isotropicsymmetry relationships account approximately for these effects by introducing the anisotropic elastic constants. Using neutron diffraction, we determined that the SiC particles are textureless.Paper presented at the Tenth International Thermal Expansion Symposium, June 6–7, 1989, Boulder, Colorado, U.S.A.     

可见光级铝合金反射镜一体化设计与分析

高精度的反射镜对于航空航天载荷具有重要的意义。随着单点金刚石车削加工技术(SPDT)和抛光技术的发展,铝合金反射镜以快速低成本制造等优点用于可见光级的应用中。为了降低系统装调的自由度,设计了一种一体化的反射镜结构,并针对126mm口径主三反射镜进行有限元建模仿真,通过对反射镜自重分析、模态分析和加工离心力分析。得出设计的主三反射镜具有较高的动态刚度,多种工况下反射镜的镜面形变化均低于1/40λ(λ=632.8nm),可应用于可见光系统中,为金属反射镜的集成设计和制造提供一定的参考。