带传动摆架式自动张紧装置的张紧力计算

基于带传动在稳定工作时的受力平衡，从理论上导出了摆架式自动张紧装置所产生的张紧力的计算公式。结果表明：只要合理选择计算安装参数，其张紧力总能满足张紧条件的要求，以对张紧装置进行设计计算；并指出该装置产生的张紧力，具有随外载荷变化而自动调节的性能，使传力零件部分卸载。     

退火炉保护气氛的安全控制

钟罩室退火护采用微压氢气作为保护气体，炉内压力的监控是保证安全生产不可忽视的必要手段，该文针对该公司选用的国产钟罩式退火护作了简要介绍，对国产钟罩式退火炉压力监控系统作了分析，指出了存在的缺陷，提出了改进措施。     

整体炉外热处理法对移动烟罩实施消应力退火

为了解决武钢三炼钢厂烟罩这类大型构件不便于在常规热处理炉内进行热处理的难题，根据有关工艺和标准要求对烟罩实施了整体炉外热处理，施工中采用在烟罩中段外部包扎保温材料，同时在烟罩两端搭设简易炉体的方法对烟罩进行保温，并制定相应的热处理施工工艺，对工件进行消除应力退火。退火后进行的应力测试表明，应用此种退火技术，工件的焊接残余应力的下降率可以达到60％以上，完全可以满足大型工件的消应力退火要求。     

Lifetime and ageing management of nuclear power plants: A brief overview of some light water reactor component ageing degradation problems and ways of mitigation

The susceptibility and tendency for nuclear power plant (NPP) components to undergo changes in their mechanical and physical properties in the course of the NPP lifetime is generally termed as “ageing”. The light water reactor (LWR) nuclear environment is not a begnign one; it is characterized not only by fast neutrons, which can degrade metallic structures, but also relatively high temperatures of coolant water (around 300°C) which may contain impurities (e.g. sulphate, chloride, peroxides) which can cause corrosion. The hydrodynamical conditions of the coolant in steam generators, for example, can cause thermal fatigue, erosion and corrosion; suspended particulate matter can accelerate erosion processes which can lead to wall thinning and lowering of safety margins. Ageing is, therefore, a very complex mixture of factors concerned with materials, temperatures, times of exposure to environments which vary with time and with respect to chemical composition and flow charactertistics.

The paper describes a few ageing phenomena which can be considered important due to their impact on nuclear safety issues; their influence on economic aspects (availability) of NPP is outlined. Mitigation measures for NPP component ageing problems are given together with recommendations for addressing such issues in NPP now and in the future.     

An examination of the effect of composite constituent properties on the notched-strength performance of composite materials

The effect of matrix and fiber properties on the strengths and failure processes of notched, continuous-fiber composite specimens has been investigated. Bearing, open and filled hole tension and compression tests were conducted on AS-4/3501-6, IM-8/3501-6, AS-4/APC-2 and IM-8/APC-2 specimens. Failure characteristics of tested specimens were studied by fractographic techniques. Failure progression was tracked by means of incremental loading, radiography and fractographic inspection.     

太钢3号卷取机TDC控制系统开发与应用

太钢热连轧厂3号卷取机改造前所采用的美国西屋公司WDPF控制系统已不能满足目前生产和质量的要求，进而应用西门子公司的TDC控制系统对其进行了改造。该项目的设计、编程、调试由太钢自行完成，改造中采用了带钢头部张力优化控制、夹送辊张力控制、卷取机平滑曲线减张控制、卸卷小车横移极限升降极限模拟控制等多项新技术。其改造后产品产量、综合成卷率和卷形良好率均明显提高。     

Effect of Post Annealing on the Microstructure and Magnetic Properties of NdFeB/α-Fe/NdFeB Thin Films

A series of nanocomposite thin films, composed of Nd2Fe14B and α-Fe, has been prepared by DC-magnetron sputtering combined ion beam sputtering onto Si (100) substrates. The effects of post annealing on the microstructure and magnetic properties of [NdFeB/α-Fe/NdFeB]-type thin films have been investigated. The X-ray diffraction (XRD) study showed that annealing of the films for 30min at temperatures 550,600,650,700℃ resulted in the appearance of diffraction peaks, characteristic for Nd2Fe14B tetragonal structure, α-Fe and Nd2O3 phases. The investigation using the Vibrating Sample Magnetometer (VSM) with a maximum applied field of 2 T indicated that with the increase of the annealing temperature, the magnetic properties of the multilayer films were improved and reached peak value at 650℃ (Hci=41.72kA·m-1, Mr/Ms=0.4, (BH)max=30.35kJ·m-3), after which the magnetic properties were decreased greatly. Along with the increase of the thickness of α-Fe layer from Tα-Fe16nm, the coercivity Hci, saturation magnetization Ms, and remanence ratio Mr/Ms all declined. As the Atomic Force Microscope (AFM) indicated, after being annealed at 650℃ for 30min, the sample was showed fine surface morphology with grain size 60nm≤dα-Fe≤80nm and 100nm≤dNdFeB≤150nm.     

Surface tension as a limiting factor for aerobic n-alkane biodegradation

A new mathematical model for n-alkane biodegradation in crude oil, heavy oil and paraffinic mixtures is described. The pattern of n-alkane degradation as a function of the inverse of hydrocarbon chain length reported in this paper can be considered as general behaviour for many aerobic n-alkane biodegradation processes. A new interpretation of n-alkane biodegradation as a function of surface tension, is given. A mathematical expression was obtained starting from the degradation values of n-alkane and relative surface tension, which is a parameter independent of fermentation conditions. An interesting parameter, b, was identified which represented the accelerating conversion factor for n-alkane biodegradation. The findings suggested that the n-alkane biodegradation. The findings suggested that he n-alkane biodegradation rate may be affected by the fermentation condition (agitation, aeration, etc.) and by the strain of microorganism, while the behaviour pattern of n-alkane degradation was essentially linked to the substrate characteristics (molecular structure, molecular weight and density).     

Effect of Microstructure on the Accelerated Creep of 20CrMoV12‐1 and P 91 Steels

In the initial part the change of microstructure for steel X20 CrMoV 121 is discussed in terms of the distribution of carbide precipitates and its effects on accelerated creep resistance and hardness are presented. In the following, experimental results of microstructure and accelerated creep resistance are presented for the steels X20CrMoV 121 and P91 annealed for up to 8760 hours at 650°C and 750°C before the testing. A similar evolution of the distribution of carbide particles of a size above 102 nm is found for both steels, while the accelerated creep resistance is diminished much stronger for the steel X20CrMoV 121. This difference is due to a greater stability of NbC than that of VC precipitates, both related to the evolution of the chemical composition of complex chromium, molybdenum and iron carbide particles.     

Electrical properties at p-ZnSe/metal interfaces

In order to prepare low resistance ohmic contacts to p-ZnSn by the “deposition and annealing (DA)” technique which has been extensively used for GaAs and Si-based devices, formation of a heavily doped layer by the p-ZnSe/metal reaction is required. For p-ZnSe/Ni contacts, Ni and Se reacted preferentially at the ZnSe/Ni interface upon annealing at temperatures higher than 250°C. However, capacitance-voltage measurements showed that the net acceptor concentration (N_A-N_D) close to the p-ZnSe/Ni interface was reduced upon the Ni/ZnSe reaction, resulting in high contact resistance. For p-ZnSe/Au contacts, neither Au/ZnSe reaction nor reduction of the acceptor concentration were observed after annealing at temperatures lower than 300°C. This indicates that although the metal/p-ZnSe reaction is mandatory to prepare a heavily doped layer, the reaction induced an increase in the compensation donors in the p-ZnSe substrate. In order to increase the acceptor concentration in the vicinity of the p-ZnSe/metal interface through diffusion from the contact materials, Li or O which was reported to play the role of an acceptor in ZnSe was deposited with a contact metal and annealed at elevated temperatures. Ni or Ag was selected as the contact metal, because these metals were expected to enhance Li or O doping by reacting with ZnSe. However, the current density-voltage characteristics of the Li(N)/Ni and Ag(O) contacts exhibited rectifying behavior, and the contact resistances increased with increasing annealing temperature. The present results indicated that, even though the acceptor concentration in the p-ZnSe substrate increased by diffusion of the dopants from the contact elements, an increment of the compensation donors was larger than that of the acceptors. The present experiments indicated that preparation of low resistance ohmic contacts by forming a heavily doped intermediate layer between p-ZnSe and metal is extremely difficult by the DA technique.