Effect of granule size and the placement geometry on the efficiency of urea supergranules for wetland rice grown on a permeable soil

In a laboratory experiment 5 cm depth of water was allowed to percolate daily down through a 15 cm thick soil (Typic Ustipsamment) layer. It was observed that leaching losses of urea supergranules (USG)-N could be decreased by about 20% by the placement of four 0.25 g granules at four points instead of one 1 g granule at one point. In field microplots, the placement of approximately 30 granules of 0.30 g size instead of 9 granules of 1.00 g size resulted in reduced leaching of USG-N and, in turn, increased rice yield. In a follow-up field study, the advantage of more frequently placed USG was confirmed. As compared with 1 g USG placed in the usual manner in the center of four rice hills, increasing the density of placement in soil produced 15% more rice grain. Further increase in rice yield could be obtained by increasing the number of USG placed in the soil and decreasing the size of the granule from 1.00 g to 0.70 or 0.35 g. With USG of 0.35 and 0.70 g yields were equal or sometimes even slightly higher than with split application of prilled urea on a heavily percolating, low-CEC, light-textured soil.     

A Projective Framework for Polyhedral Mesh Modelling

We present a novel framework for polyhedral mesh editing with face‐based projective maps that preserves planarity by definition. Such meshes are essential in the field of architectural design and rationalization. By using homogeneous coordinates to describe vertices, we can parametrize the entire shape space of planar‐preserving deformations with bilinear equations. The generality of this space allows for polyhedral geometric processing methods to be conducted with ease. We demonstrate its usefulness in planar‐quadrilateral mesh subdivision, a resulting multi‐resolution editing algorithm, and novel shape‐space exploration with prescribed transformations. Furthermore, we show that our shape space is a discretization of a continuous space of conjugate‐preserving projective transformation fields on surfaces. Our shape space directly addresses planar‐quad meshes, on which we put a focus, and we further show that our framework naturally extends to meshes with faces of more than four vertices as well.     

泄水建筑物下游冲刷坑二维数值模拟

对巨亭水电站泄水建筑物下游局部冲刷过程进行了二维数值模拟。采用RNG k-ε湍流模型封闭N-S方程、有限体积法在计算网格上离散求解、VOF方法追踪自由水面;采用C语言编写用户自定义函数,以泥沙起动切应力作为床面泥沙起动判别标准,通过分析比较水流剪切力与泥沙起动切应力大小,用以控制冲刷坑底部边界变化;采用局部重构模型和弹簧光顺模型更新计算区域和网格质量,藉以模拟和追踪局部冲刷坑边界变化。研究表明,模拟结果与实测资料符合良好。在冲刷坑的冲刷过程中,床面剪切应力随着冲刷的进程急剧减小,湍动能随着冲刷的进程减小缓慢;床面剪切应力和湍动能沿程变化均较为剧烈,床面剪切应力沿程先增大后减小,床面湍动能则沿程减小。冲刷坑的纵向平衡形态或床面泥沙起动主要决定于床面剪切应力,床面湍动能对泥沙起动也具有重要影响。     

Toughness Optimization of SBR Elastomers – Use of Fracture Mechanics Methods for Characterization

Elastomer materials are used in a wide application range and subjected to different loading from which failure of the material results. Because this failure is caused by initiation and propagation of cracks, the application of fracture mechanics methods for the assessment of the material is obvious. A short summary of the methods of technical fracture mechanics including possibilities of determination of crack resistance curves is given. Vulcanizates on the basis of SBR 1500 with various sulfur and carbon black contents were investigated. For describing the crack initiation and crack propagation behavior, several fracture mechanics examination methods were applied. Tear‐analyzer results were used to assess the crack propagation behavior under fatigue‐like loading conditions. Furthermore, for the characterization of the crack resistance of the materials under impact‐like loading conditions, instrumented tensile‐impact tests were performed. To obtain information about the initiation and propagation of a stable crack, quasi‐static fracture mechanics tests were applied. The results of the several tests are discussed in dependence on sulfur and carbon black contents. We found a non‐monotonous behavior of the toughness as a function of carbon black loading. An explanation is given in connection with a percolation‐like transition in filler morphology on larger length scales.

Schematic crack propagation curve for characterizing the fatigue behavior of the vulcanizates recorded in a TFA test.     

Pattern synthesis of time‐modulated conformal arrays by an improved differential evolution algorithm

In this article, an improved differential evolution algorithm (IDE) based on two different colonies is proposed and applied to time‐modulated conformal arrays syntheses. The whole population of IDE is divided into two parts. The one part searches the solution globally while the other searches the neighborhood of the solution provided by the previous one. Benchmark functions are provided to testify IDE. Furthermore, IDE is applied to synthetize sum‐difference patterns with a 1 × 16 elements time‐modulated circular array and low sidelobe level (SLL) patterns with an 8 × 12 elements time‐modulated cone array. After optimization, the sideband level (SBL) of the circular array at the first sideband frequency is ?1.00 dB. The SLL and SBL at the first sideband frequency of the cone array are lower than ?30.00 and ?20.00 dB, respectively. Experiment results verify the superior performance of IDE. Moreover, to accelerate the computation speed, graphics processing unit parallel computing technique is introduced into pattern synthesis and the acceleration ratios of more than 23 times can be achieved. © 2014 Wiley Periodicals, Inc. Int J RF and Microwave CAE 24:697–705, 2014.     

Limits of compensation in a failed antenna array

In large antenna arrays, the possibility of occurrence of faults in some of the radiating elements cannot be precluded at all times. In such situations, the radiation pattern of the array gets distorted, mostly with an increase in sidelobe level and decrease in gain. Although it is not possible to restore the pattern fully by rearranging the excitations of the functioning elements, compensation methods have been reported in the literature for restoring one performance parameter of the array and making a trade‐off on some other parameter. In this article, we have made a study on the tolerance level of this compensation process. One part of the study deals with the thinning in the failed array, that is, to find a limit on the minimum number of functioning elements of the array that can restore the digital beamforming of the failed array. The second part of study deals with finding the maximum number of element failures that can be compensated. The study was carried out by optimizing the amplitude excitations of the failed array. Instead of classical optimization techniques, particle swarm optimization was used for the compensation process. © 2014 Wiley Periodicals, Inc. Int J RF and Microwave CAE 24:635–645, 2014.     

Differential geometry based active fault tolerant control for aircraft

This work shows how to use a differential geometry tool to design a novel nonlinear active fault tolerant flight control system for aircraft. The proposed control scheme consists of two main subsystems: a controller, which is designed for the nominal plant, and a fault detection and diagnosis module, which provides fault estimation. A further feedback loop exploits the fault estimation to accommodate faults affecting the system. The estimate convergence and the stability of the active fault tolerant flight controller are theoretically proved. Finally, high fidelity simulations show the effectiveness of the scheme.     

基于几何特征的流体动画控制方法

在流体动画中,流体控制是生成可控流体运动的关键技术.为产生视觉逼真、行为可控的流体动画效果,提出一种基于几何特征的流体控制方法.首先通过构建流体形状的时变几何分区,实现对可控流体形状的表达及动态跟踪;在此基础上设计异构控制模型,以增强流体运动控制的灵活性,该模型采用了带约束优化的刚性控制和基于弹簧模型的柔性控制2种方法;最后将异构控制模型与高精度流体物理模型相耦合,生成视觉逼真的可控流体运动效果.实验结果表明,该方法能够在保持流体角色形状的同时产生丰富的流体细节,满足动画师的设计需求.     

The influence of geometrical factors and feedstock on gasification in a high temperature fluidised bed

Results are presented for gasification of coal and char by means of air or air-steam mixtures in fluidised bed reactors of three different volumes. Two sizes of coal feedstock particles, 0.5-1.0 mm and 1.0-1.5 mm, and one size of char particles, 0.5-1.5 mm, were used. The calorific value of generated gas and the carbon conversion are presented as a function of particle residence time. For coal gasification higher carbon conversion has been obtained at the same particle residence time than for char gasification. For the steam gasification, a lower gas heating value of about 4 MJ/m³ (S.T.P.) was obtained.     

行为NA的随机变量阵列的收敛性

利用NA序列的一个矩不等式,研究了行为NA的随机变量阵列,证明了1/n1p∑ni=1Xni平均收敛于0、完全收敛于0、几乎必然收敛于0、依概率收敛于0的等价性.