穿流栅板塔设计及其在氟化氢吸收中的应用

介绍了氟化氢吸收原理、流程 ,国内外氟化氢吸收设备的选型 ,满足工艺要求的穿流栅板塔的设计计算及应用。     

The design of experiments,training and implementation of nonlinear controllers based on neural networks

In the area of nonlinear predictive control, several control schemes using artificial neural networks have been proposed. In this work, the issues relating to the information contents of the data used to train the neural network components of these nonlinear predictive control schemes are considered. This raises questions about the design of experiments. A class of feedback-feedforward nonlinear controller based on the model predictive structure (also known as Internal Model Control, IMC, structure) is investigated. The implementation and performance of these neural network based controllers, together with comparisons to other nonlinear and linear controllers, are illustrated on two nonlinear continuous-stirred-tank-reactor simulations.     

玻璃钢浮标的设计计算

本文探讨了玻璃钢浮标的设计计算思想，给出了玻璃钢浮标静水力性能、环境荷载、水动力性能和强度的分析计算方法。     

北京市雨水收集利用蓄水池容积计算与分析

基于北京市1984—2013年的日降雨资料,以北京林业大学林业楼及其周边绿地为研究区,设置3种用水情景(冲厕、绿地灌溉及冲厕+绿地灌溉),采用连续模拟法,分别绘制3种用水情景下雨水收集利用工程的雨水截留率、自来水替代率、供水保证率以及效益费用比变化曲线,并通过综合分析这些曲线的变化特征确定雨水蓄水池最佳设计容积(60~82 m3)。同时采用设计暴雨法计算1~5年不同重现期的蓄水池设计容积(77~248 m3)。结果表明,连续模拟法计算过程相对复杂,但可用于综合衡量雨水收集利用工程的雨洪管理效益,以及缓解水资源短缺效益、供水可靠性及经济可行性分析。     

State estimation for high-dimensional chemical processes

The application of conventional observer designs for high-dimensional systems may not always be practical due to high computational requirements or the resulting observers being too sensitive to measurement noise. In order to address these issues, this paper presents two observer design techniques for state estimation of high-dimensional chemical processes. One technique is used for systems with inputs, whereas the other one is specifically geared towards systems that are not excited from the outside. Both of these observers are applicable to linear and with a modification to non-linear systems.The main idea behind the presented observer designs is that a reduced-order observer is implemented instead of a conventional state estimator. The motivation is that subspaces, which are close to being unobservable, cannot be correctly reconstructed in a realistic setting due to measurement noise and inaccuracies in the model. The presented approaches make use of this observation and only reconstruct the parts of the system where accurate state estimation is possible. The observer designs are illustrated on a 30-tray distillation column model. Additionally, it has been shown that the location of process measurements has a major effect on the performance of the presented reduced-order observers.     

淀粉分子磁化修饰及其再生膜材料制备

以高直链淀粉（HS）为原料，通过“还原胺化-点击化学法”在其还原性端的潜在醛基上进行磁化分子修饰，得到具有磁性的变性淀粉（MMS），并在外磁场作用下制备再生淀粉膜。具体包括在HS分子唯一的潜在醛基上引入炔基，对四氧化三铁粒子（MNP）进行硅烷包覆得到叠氮化磁体粒子（azide-MNPs），两者经点击化学反应得到分子链末端带磁的变性淀粉。借助XRD、FTIR、NMR和MALDI-TOF MS对产物进行结构表征，结果表明，磁体粒子精准接枝到高直链淀粉分子还原末端，得到目标产物MMS。再生淀粉膜性能测试结果表明，在外磁场诱导条件下MMS逐渐趋于分子有序排列，制得的再生淀粉膜较纯CMS淀粉膜断裂伸长提升49.5%，断裂强度提升88.3%，短程有序程度提高。该文为基于外加磁场下的淀粉再生膜结构设计和力学性能调控提供了新思路。     

Designing multilayered wire‐grid polarizers using a monochromatic recursive convolution finite‐difference time‐domain algorithm

Multilayered wire‐grid polarizers (WGP) find application as low‐reflection polarizers in projection‐type liquid crystal display devices. A multilayered WGP is formed by adding thin layers on top of the metal ridges of an ordinary WGP. The ordinary WGP consists of a periodic array of parallel metal ridges, where the period of the array and the width of any individual metal ridge are typically less than the wavelength of the incident light. Such WGPs are often used as efficient polarizers. However, in certain applications, it is important to reduce the reflection from the WGP while preserving the polarization efficiency. One of the ways to achieve this goal is to add thin layers on top of the metal ridges of the ordinary WGP. The reduction in reflection from the multilayered WGP depends on the number and material of these additional layers. In this paper, we describe a design method for multilayered WGPs based on an effective medium theory, thin‐film computation method and a monochromatic recursive convolution finite‐difference time‐domain algorithm. The goal of design process is to identify suitable materials and thicknesses for the additional thin layers needed to lower the reflection appreciably. The design method is explained with the help of bilayered WGPs.     

A function-to-task process model for adaptive automation system design

Adaptive automation systems allow the user to complete a task seamlessly with a computer performing tasks at which the human operator struggles. Unlike traditional systems that allocate functions to either the human or the machine, adaptive automation varies the allocation of functions during system operation. Creating these systems requires designers to consider issues not present during static system development. To assist in adaptive automation system design, this paper presents the concept of inherent tasks and takes advantage of this concept to create the function-to-task design process model. This process model helps the designer determine how to allocate functions to the human, machine, or dynamically between the two. An illustration of the process demonstrates the potential complexity within adaptive automation systems and how the process model aids in understanding this complexity during early stage design.     

Application of the Box-Wilson experimental design method for the spherical oil agglomeration of coal

In this study, the Box-Wilson statistical experimental design method was employed to evaluate the effects of important variables such as bridging liquid (oil) concentration, salt (CaCl₂·2H₂O) concentration and stirring speed on the agglomeration of bituminous coal. Response function coefficients were determined by the regression analysis of experimental data and the predictions were found to be in good agreement with the experimental results. The optimum kerosene concentration, CaCl₂·2H₂O concentration and stirring speed were determined as 30 wt%, 1 M and 1683 rpm, respectively, when considering combustible recovery and ash content.In addition, contact angle and solution surface tension measurements were carried out to evaluate of agglomeration success with the contact angle values and surface tension values. The surface tension of CaCl₂ 2H₂O solutions and the average contact angle increased with increasing CaCl₂·2H₂O concentration.     

橡胶波纹管模具的特点及其设计

介绍几种橡胶波纹管模具的特点及其设计，并对其优缺点进行了对比，以便更好地选用适宜的结构形式。