Formation of low-resistivity poly-Si and SiNx films by Cat-CVD for ULSI application

In this paper, bulk-Si metal–oxide–semiconductor field effect transistors (MOSFETs) are fabricated using the catalytic chemical vapor deposition (Cat-CVD) method as an alternative technology to the conventional high-temperature thermal chemical vapor deposition. Particularly, formation of low-resistivity phosphorus (P)-doped poly-Si films is attempted by using Cat-CVD-deposited amorphous silicon (a-Si) films and successive rapid thermal annealing (RTA) of them. Even after RTA processes, neither peeling nor bubbling are observed, since hydrogen contents in Cat-CVD a-Si films can be as low as 1.1%. Both the crystallization and low resistivity of 0.004 Ω·cm are realized by RTA at 1000 °C for only 5 s. It is also revealed that Cat-CVD SiN_x films prepared at 250 °C show excellent oxidation resistance, when the thickness of films is larger than approximately 10 nm for wet O₂ oxidation at 1100 °C. It is found that the thickness required to stop oxygen penetration is equivalent to that for thermal CVD SiN_x prepared at 750 °C. Finally, complementary MOSFETs (CMOSs) of single-crystalline Si were fabricated by using Cat-CVD poly-Si for gate electrodes and SiN_x films for masks of local oxidation of silicon (LOCOS). At 3.3 V operation, less than 1.0 pA μm⁻¹ of OFF leakage current and ON/OFF ratio of 10⁷–10⁸ are realized, i.e. the devices can operate similarly to conventional thermal CVD process.     

High‐pressure processing effects on the mechanical,barrier and mass transfer properties of food packaging flexible structures: a critical review

Food products can be high‐pressure processed (HPP) either in bulk or prepackaged in flexible or semi‐rigid packaging materials. In the latter case the packaging material is subjected, together with the food, to high‐pressure treatment. A number of studies have been performed to quantify the effects of high‐pressure processing on the physical and barrier properties of the packaging material, since the integrity of the package during and after processing is of paramount importance to the safety and quality of the food product. This article reviews the results of published research concerning the effect of HPP on packaging materials. Copyright © 2004 John Wiley & Sons, Ltd.     

五号桩—长堤地区沙河街组砂体储集性及控制因素研究

沙河街组是沾化凹陷东部五号桩-长堤地区重要的储油层系，主要目的层段为沙三段和沙二段。沙三段和沙二段主要发育有浊积扇、水下冲积扇和滩坝沉积体系，在浊积扇、水下冲积扇中发育辫状水道、扇中前缘、辫状水道间以及扇根、扇缘等沉积微相类型，其中辫状水道、扇中前缘砂体物性好，原生孔隙及次生孔隙均较发育，辫状水道间以及扇根砂体物性较差。其储集特征主要受岩性、沉积微相、成岩作用等因素控制，结合该地区实际情况，将沙二段、沙三段储集层划分为好、中、差3种类型。图4表1参7     

CONSTITUTE AND PROPERTY OFα-Ti AFTER HYDRIDING TREATMENT

研究了氢化处理对退火α-Ti 板材的组织、结构及性能的影响。α-Ti 在室温出现两种结构的氢化物:有序的fctγ相(TiH)和fccδ相(TiH_2)。分析了用X 射线衍射只查觉到δ相的原因。氢化物的数量及形态影响除氢后基体的晶粒组织。控制氢含量可以改善拉伸性能及疲劳性能。     

黄原胶接枝共聚物降滤失剂应用性能评价

黄原胶（XG）具有优良的耐盐性和增稠降滤失性能，但耐温性较差。对XG分子结构的分析认为，可利用XG链上的活泼基团接枝丙烯酰胺等乙烯基单体，增强其耐温性能，用作耐温抗盐钻井液处理剂。对比了合成的黄原胶丙烯酰胺等接枝共聚物（XGG）降滤失剂与XG在淡水、4％盐水和饱和盐水钻井液中的增粘降滤失性能和抗温性能，并通过岩心膨胀试验对比了XGG、XG和KCl对页岩的抑制性能。试验结果表明，在淡水钻井液中XGG具有极强的增粘效果和降滤失能力，远远超过XG1随着钻井液矿化度的提高，XGG的性能有一定下降，但XGG在各种钻井液中均具有比XG更好的高温增稠和控制失水的能力；XG已具有优良的抑制性，XGG的抑制性得到进一步提高。     

Study on the long‐term thermal‐oxidative aging behavior of polyamide 6

The long‐term thermal‐oxidative aging behavior of polyamide 6 (PA6) was studied by comparison with the stabilized sample in this work. The variation of mechanical properties of the pure and the stabilized samples of PA6 with aging time at 110°C, 130°C, and 150°C were investigated, respectively. The aging mechanism of PA6 under heat and oxygen was studied in terms of the reduced viscosity, crystallization behavior, dynamic mechanical behavior, and chemical composition through the methods of polarized light microscopy (PLM), differential scanning calorimetry (DSC), dynamic mechanical analysis (DMA), X‐ray photoelectron energy spectrum (XPS), and so on. The results indicated that at the initial stage of aging, the molecular crosslinking reaction of PA6 dominated resulting in the increase of the mechanical strength, reduced viscosity, and the glass transition temperature of the sample. And the molecular degradation dominated in the subsequent aging process resulting in the decrease of the melting temperature, the increase of the crystallinity, and the formation of the oxides and peroxides products. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Thermal and mechanical properties of epoxy composites reinforced by a natural hydrophobic sand

If a low weight percentage of crude fine fillers can improve properties of polymer materials directly without complicated chemical treatment process involved, it will be significant for many industrial applications. Our previous study indicated that a kind of Cancun natural sand could be an effective filler material for polymer composites. In this current work, the epoxy composites reinforced by this kind of natural sand particles were prepared and thermal and mechanical properties of the composites containing up to 5 wt % of the sand particles were characterized. Results showed that the highest flexural strength appears in the epoxy composite containing 1 wt % sand particles. A damage model was used to interpret the flexural properties, which showed an acceptable agreement with the experimental results. The glass transition temperature, high temperature storage modulus, and dimensional stability of the sand/epoxy composites monotonically increased with the addition of the sand particles. The sand particle/epoxy composites also displayed a noticeable enhancement in thermal conductivity. Theoretical analysis showed that in addition to conduction, other heat transport mechanisms played roles in the improved heat transmission through the composites. As a natural porous micron-scale material, Cancun sand has the potential for applications in cost-effective composites with enhanced mechanical and thermal properties. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Epoxidation of high trans‐1,4‐polyisoprene and its properties

A new organic‐solvent‐free water‐phase suspension method was used to synthesize partially epoxidized high trans‐1,4‐polyisoprene (TPI) to improve its properties, including oil resistance and wet‐skid resistance. The epoxidation was conducted in an aqueous peracetic acid solution and on the TPI granules prepared by a bulk precipitation method with supported titanium catalyst. The effects of the synthesis conditions, including reaction temperature, reaction time, and pH value, on the epoxy content were investigated. Epoxidized trans‐1,4‐polyisoprene (ETPI) with epoxy contents between 10 and 80% were obtained within 4 h. Both the amorphous and crystalline regions of TPI were epoxidized. The crystallization properties decreased with increasing epoxy content. ETPIs possessed lower mechanical properties than TPI but could be enhanced by vulcanization. The oil resistance and wet‐skid resistance were significantly improved after epoxidation. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

国有企业公司治理结构的缺陷分析与对策

多数国有大中型企业实行公司化改制后经营状况依然不佳,直接原因在于公司的治理存在严重的问题和缺陷。规范的公司治理结构能有效缓解代理问题。国有企业的产权残缺性,使公司治理结构中的直接监督和间接监督等有效手段不能充分发挥。通过股权结构的分散化调整,充分发挥非国有股权所有者的作用,建立有效的公司治理结构。     

Brokers and bricoleurs: entrepreneurship in Wales' online music scene

 The power of some new entrants to the music industry derives from their position as brokers in computer-mediated environments. Brokers act instrumentally to exploit their position within a network which, in turn, depends on their ability to build and sustain links (and, in computer-mediated environments, hyperlinks). Bricolage in computer-mediated entrepreneurship refers to the intuitive manipulation of resources in order to achieve (perhaps tacit) goals. Without careful stewardship of the new intellectual wealth thus created, bricolage may profit neither the individual nor the wider community. Accepted 14 March 2002