Effect of organic modifiers on dynamic and static nanomechanical properties and crystallinity of intercalated clay–polycaprolactam nanocomposites

Polymer clay nanocomposites (PCN) of Polyamide6 and sodium montmorillonite are prepared using different organic modifiers (12‐aminolauric acid, n‐dodecylamine, and 1,12‐diaminododecane) to study effect of organic modifiers on structure and nanomechanical properties of PCN. Using X‐ray diffraction and differential scanning calorimetry, crystalline nature of PCNs are evaluated. Nanoscale viscoelastic properties of PCNs are evaluated using nanodynamic mechanical analyzer (NanoDMA). Nanoscale elastic modulus and hardness of PCNs are evaluated using nanoindenter. PCNs show enhancement in elastic modulus, storage modulus, loss modulus, and loss factor by maximum amount of 62.88%, 56.38%, 145.74%, and 71.43%, respectively, and decrease in percentage crystallinity by 16.52% compared to pure polymer. This result indicates that organic modifiers have effect on crystallinity and nanomechanical properties of PCN. To evaluate effect of clay loading on nanomechanical properties of PCN, PCN containing 12‐aminolauric acid is synthesized with different weight percent (3, 6, and 9% of weight of polymer) of organically modified montmorillonite (OMMT), which shows that nanomechanical properties of PCN improves with increase in clay loading. Our study reveals that change in crystallinity of polymer in PCN may have role in the enhancement of nanomechanical properties of PCNs in comparison to pristine polymer. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 2007     

基于AD7884的分离脱落电连接器机械分离力测试台的设计

基于分级型模数转换器AD7884对分离脱落电连接器的分离力进行测量,采用8位单片机W77E58与之接口,进行数据处理并通过485串口传输到上位机。实现了对分离脱落电连接器的分离力进行测量,系统运行稳定,且与上位机数据交互简单、可靠。     

浅析SRT-Ⅳ裂解炉炉管弯曲及断裂原因

主要分析计算了裂解炉炉管受力情况，进而得出结论：裂解炉自身结构的相互约束力和炉管渗碳是导致炉管弯曲、断裂的主要原因，并提出了相应的解决措施。     

陶瓷压机预应力结构的分析

对大型液压自动压砖机的预应力结构进行了分析，建立了机架预紧的力学模型，给出了预紧力的计算公式，分析了预应力对结构疲劳强度的影响。最后通过设计实例证明了预应力结构是可靠的。     

六维腕力传感器非线性正解耦方法设计

多维力传感器利用其多个转换单元完成测量加载于其结构上未知负载的作用效果,解耦是其设计的重要组成部分。针对传统静态线性解耦方法的不足,试图将传统线性解耦方程扩展为多项式结构,受其多元高次方式通解形式的启发,构造了一种多项式非线性静态正解耦方程,该方法无需传统线性解耦方法中的曲线拟合、逆解,不依赖以系统是线性为前提,且方程可以扩展成任意结构的多项式。实验结果表明:该方法能降低输出耦合误差。     

动态三螺杆挤出机制备热塑性硫化胶的研究

对比分析了动态热塑性硫化胶(TPV)的加工设备,着重介绍了附加振动力场的三螺杆反应挤出机的结构特点以及利用该机进行三元乙丙橡胶/聚丙烯(EPDM/PP)的动态全硫化,对制品的物理力学性能和微观结构分别进行了测试分析和电镜扫描。结果表明,振动力场作用下EPDM/PP共混体系反应挤出动态硫化加工可有效地实现动态硫化反应、硫化橡胶的粉碎和分散以及相态反转,振动力场的作用明显提高了TPV性能。     

Shear Strength of Pressure Sensitive Adhesives and its Correlation to Mechanical Properties

Correlations between shear resistance and the mechanical properties of pressure sensitive adhesives are studied by measuring the deformation behaviour in the static and the dynamic shear test and determining the dynamic shear modulus of the adhesive. For polymers with low or moderate viscosities, the shear strain vs. time characteristics in a static shear test and, accordingly, the static shear strength, can be evaluated from the master curves of the dynamic shear modulus or the dynamic viscosity. The dynamic shear strength also can be calculated. These exact calculations cannot be applied to highly viscous or slightly crosslinked polymers. On the basis of the model experiments, empirical correlations between shear strength and the dynamic shear modulus are established which seem to be generally valid.     

微孔发泡过程中聚合物/超临界CO2均相体系形成的研究

阐述以超临界CO2为发泡剂的微孔发泡中均相体系的形成过程，研究聚合物熔体和气体的混合机理，并分析影响均相体系形成过程的因素。结果表明，聚合物和气体本身的结构和性质、工艺条件、加工设备、外力场等均影响均相体系的形成，振动力场的引入可以提高多相体系的混合程度，在聚合物／气体均相体系的形成过程中引入振动力场是一个全新的研究方向。     

精细化工发展的策略研究

作者对精细化工发展的策略提出如下意见：①将项目为核心改成以技术为核心；②培植企业和部门的技术力量；③搞好行业内部、行业之间、企业内部的协调；④产品方案向横向、纵向延伸；⑤采取多种技术引进方式。     

Surface characterization of cross-linked elastomers by shear modulation force microscopy

Brominated poly(isobutylene-co-4-methylstyrene) (BIMS) is a synthetic terpolymer which can be stoichiometrically cross-linked by N,N′-dicinnamylidene-1,6-hexanediamine (DIAK). The degree of cross-links on bulk samples was determined by measuring the low frequency shear modulus with parallel plate method. The surface modulus of the same samples was measured using a new method, shear modulation force microscopy (SMFM). The moduli of the bulk sample and the surface were found to have the same scaling with the cross-link density, and good agreement with rubber elasticity theory was obtained in both cases. The SMFM was then used to monitor the cross-linking process, as a function of DIAK concentration and curing time, in thin films where standard rheological methods cannot be applied. The results show that in all cases the cross-linking reaction at the surface reaches saturation in less than 10 min as compared to at least 1 h in the bulk samples.