激光-电弧复合焊接过程中高频干扰的消除

激光-电弧复合焊接过程中,由于引孤产生的高频干扰了激光器的控制系统,造成了激光和电弧不能实现复合焊接.通过分析研究高频引弧对焊接电源和激光器的干扰途径,采取相应的措施,有效地消除了高频干扰问题,成功实现了激光和电弧之间的复合焊接.     

铝合金激光-电弧复合焊接工艺研究

对LF6铝合金的激光-电弧复合焊接工艺进行了初步研究。通过工艺试验,分析研究了焊接速度、激光焦点位置、钨极与激光束之间的距离、焊接电流对焊缝质量(熔深、熔宽)的影响规律。     

树脂砂型离心铸管表面粘砂缺陷的研究

研究了树脂砂型离心铸管表面质量及影响因素。结果表明，覆膜砂粒反和砂层厚反对铸件表面质量有显著影响。砂的粒度细时不易粘砂且铸件表面粗糙度高，而砂层厚度越薄表面质量越差，故至少需４ｍｍ厚的砂层。砂中加氧化铁粉时对防止粘砂不起作用，但砂层表面涂刷涂料时防止粘砂效果非常明显。     

Nickel-Carnosine complex:A new carrier for enzymes immobilization by affinity adsorption

Immobilization is an effective method to promote the application of enzyme industry for improving the stability and realizing recovery of enzyme.To some extent,the performance of immobilized enzyme depends on the choice of carrier material.Therefore,the development of new carrier materials has been one of the key issues concerned by enzyme immobilization researchers.In this work,a novel organic-inorganic hybrid material,nickel-carnosine complex (NiCar),was synthesized for the first time by solvothermal method.The obtained NiCar exhibits spherical morphology,hierarchical porosity and abun-dant unsaturated coordination nickel ions,which provide excellent anchoring sites for the immobiliza-tion of proteins.His-tagged organophosphate-degrading enzyme (OpdA) and ω-transaminase (ω-TA)were used as model enzymes to evaluate the performance of NiCar as a carrier.By a simple adsorption process,the enzyme molecules can be fixed on the particles of NiCar,and the stability and reusability are significantly improved.The analysis of protein adsorption on NiCar verified that the affinity adsorp-tion between the imidazole functional group on the protein and the unsaturated coordination nickel ions on NiCar was the main force in the immobilization process,which provided an idea way for the develop-ment of new enzyme immobilization carriers.     

Improvement of coercivity and thermal stability of Nd-Fe-B sintered magnets by intergranular addition of Tb80Fe20 alloy

To improve the coercivity and temperature stability of Nd-Fe-B sintered magnets for high-temperature applications, the eutectic Tb₈₀Fe₂₀ (wt%) alloy powders were added into the Nd-Fe-B sintered magnets by intergranular method to enhance the coercivity (H_cj) and thermal stability. The microstructure, magnetic properties and thermal stability of the Nd-Fe-B magnets with different Tb₈₀Fe₂₀ contents were studied. The experimental results demonstrate that the coercivity (H_cj) of the sintered Nd-Fe-B magnet is significantly enhanced from 14.12 to 27.78 kOe, and the remanence (B_r) decreases not obviously by introducing 4 wt% Tb₈₀Fe₂₀ alloy. Meanwhile, the reversible temperature coefficients of coercivity (β) and remanence (α) of the Nd-Fe-B magnets are increased from ?0.5634%/℃ to ?0.4506%/℃ and ?0.1276%/℃ to ?0.1199%/℃ at 20–170 ℃, respectively. The Curie temperature (T_C) of the Nd-Fe-B magnet is slightly enhanced with the increase of Tb₈₀Fe₂₀ content. Moreover, the irreversible flux magnetic loss (h_irr) is obviously reduced as Tb₈₀Fe₂₀ addition increases. Further analysis of the microstructure reveals that a modified microstructure, i.e. clear and continuous RE-rich grain boundary layer, is acquired in the sintered magnets by introducing Tb₈₀Fe₂₀ alloy. The associated mechanisms on improved coercivity and thermal stability were comprehensively researched.     

Mo的替代对FeNbBCu软磁纳米晶合金磁谱的影响

本文研究了Fe82Nb7-xMoxB10Cu1(x=0,1,3,5）系列纲伙晶软磁合金中Mo的含量对磁导率谱（频率范围1kHz-1MHz)的影响，并用畴壁钉扎理论进行了解释，在磁谱中观测到随着Mo含量的增加，弛豫频率线性地上升，μ′随外加磁场幅度变化曲线表明其原因在于Mo的替代导致了钉扎场的增强。     

热应力作用下碳化钨基钢结硬质合金梯形裂纹的形成机理

在自约束型热疲劳试验机上对碳化钨含量不同的钢结硬质合金进行了热疲劳试验，用金相显微镜和扫描电镜对热疲劳裂纹扩展行为进行了研究。结果表明：在热应力作用下，不仅在合金的表面，在合金的内部都形成了“梯形”裂纹。这种形态的裂纹是由试样缺口处的热疲劳裂纹扩展而引起的，合金中的钢基体相阻碍裂纹扩展，而WC硬质相诱导裂纹扩展，这两种因素的综合作用促使热疲劳裂纹成“梯形”扩展。分析认为：使WC粒子在钢基体中均匀分布，提高钢基体的热疲劳抗力，从而来阻止梯形裂纹的形成，是提高碳化钨钢锆硬质合金抗热疲劳性能的有效途径。     

Nanocrystalline Nd2Fe14B／α—Fe permanent magnet

Nd8.5Fe75Co5Cu1Zr3Nb1B6.5bonded magnet was prepared by melt-spinning(vs=18m/s)and subsequent heat treatment(670℃，4min).Excellent magnetic properties of the bonded magnet were achieved:Br=0.68T,iHc=620.3kA/m,(BH)max=74kJ/m^3.The addition of Cu and Zr elements shows to be advantageous in improving an intrinsic coercivity and squareness of hysteresis loop,as well as energy product.In has a remarkable remanence enhancement and the isotropic saturation remanence ratio Mr/Ms is 0.83.     

磁性材料产业现状与展望

介绍磁性材料的主要品种，如永磁体、软磁体和磁记录介质材料的行业现状及技术进步。     

聚氨酯-聚丙烯酸酯复合乳液的动态力学性能

采用种子乳液聚合法合成了聚氨酯一聚丙烯酸乙（丁）酯[PU／PE（B）A]复合乳液。并研究了不同组成对复合乳液性质、相客性、阻尼性能及拉伸性能的影响。耐水性及稳定性测试表明，随PE（B）A含量的增加，涂膜的耐水性变好，而乳液的稳定性变差。动态力学性能测试（DMS）表明，合成的PU／PE（B）A复合乳液为半相容体系，其相容性随PE（B）A含量的增加而增强。DMS和拉伸试验表明PU／PEA／P（B）A（质量比50／25／25）复合乳液具有优良的阻尼性能、抗拉强度和断裂伸长率，可用作宽温域阻尼涂料。