Fisher最优分割法在星星哨水库汛期分期划分中的应用

Fisher最优分割法是对有序样本进行最优化分段的一种数学方法。本文利用该方法对星星哨水库汛期进行相应的划分,结果表明该方法是可行的。因此,可利用该结果对分期实施不同的汛限水位,使水库的防洪和兴利效益达到最大。     

对ADSL接入方式铜缆可用线对率的分析

指出了为发展ADSL而提高市话音频铜线电缆的传输质量和维护水平的必要性,分析了铜线电缆线对有关指标参数低劣的原因和对传输ADSL的影响,并提出了一些改进的意见。     

钢筋砼框架非线性分析的简化单元模式

介绍一种用于钢筋混凝土框架二阶弹塑性分析的简化单元模式。它考虑了轴力的二阶效应、横截面的塑化和塑性区长度等非线性因素的影响。利用杆件截面的弯矩—曲率关系,可以直接由弹性杆件的转角—位移方程建立单元的非线性刚度矩阵。经与试验结果比较,说明计算结果是正确的。     

包钢氟污染治理成效及对策

本文介绍了包钢历年来氟污染治理成效以及控制外排氟总量达标的具体措施.     

无间隙原子钢的微观结构特征和塑性应变比

采用Ｘ射线衍射的ＯＤＦ和ＬＰ分析技术，ＳＥＭ电子通道花样和蚀坑技术观测，研究了超深冲无间隙原子钢板的微观结构特征。结果表明：控制化学成分、保证基体纯净、优选工艺参数，促进强的γ－〈１１１〉∥Ｎ．Ｄ纤维织构的形成是获得优异成型性的关键。用ＣＭＴＰ方法，由ＯＤＦ织构数据从理论计算了塑性应变比（ｒ），表明ｒｍ值高达３．１８。文中讨论了再结晶织构形成机制。     

非自喷井压力恢复测试方法探讨

介绍了地层测试与抽汲、测恢复联作的设计方法和作业过程，选择了两口典型井，进行了作业过程回顾和成果分析。该技术在改造措施前后均可进行，均可测得满意的压力恢复曲线。     

中央预算内水利基建投资计划编制对策和建议

随着国家投资体制改革的不断深入，为进一步规范政府投资行为，提高投资效益，国家发展改革委对中央预算内基建投资计划的编制提出了一些新的、更加严格的要求。为尽快适应新要求，努力稳定中央水利基建投资计划规模，建议正确把握政策，界定公共财政投资的水利基建范畴；加快前期工作，增加政府投资项目储备：调整结构，把握中央水利基建投资的方向和重点；调整思路，努力稳定部门自身建设项目投资规模等。     

Influence of Storage Time and Temperature on Absorption of Flavor Compounds from Solutions by Plastic Packaging Materials

ABSTRACT: Linear low-density polyethylene (LLDPE), oriented polypropylene (OPP), polycarbonate (PC), polyethylene terephthalate (PET film and PET bottle), and polyethylene naphthalate (PEN) were stored in a model solution containing 10 flavor compounds at 4, 20, and 40 °C and flavor absorption by the plastic materials was followed in time. The absorption rate and/or total amount absorbed increased considerably with temperature from 4 to 40 °C. Depending on storage temperature, total flavor absorption by the polyolefins (LLDPE and OPP) was 3 to 2400 times higher than by the polyesters (PC, PET, and PEN). Therefore, in the factor of flavor absorption, polyesters are preferred over polyolefins as packaging material.     

N.m.r. study of the ferroelectric phase transition in a 7030mol% copolymer of vinylidene fluoride (VF2) and trifluoroethylene (TrFE)

Nuclear magnetic resonance (n.m.r.) studies of ¹⁹F nuclei in a $\text{70}\text{30}\text{mol}\text{\%}$ random copolymer of vinylidene fluoride and trifluoroethylene were performed at 9.14 MHz and 20.0 MHz. The free induction decays (FIDs) were analysed in terms of two T₂ components attributed to the amorphous and crystalline portions of the polymer. The changes in crystallinity as well as the effects of the ferroelectric transition were observed during cycles of heating and cooling between 20°C and 140°C. The crystalline component of the FID lengthens by a factor of 2 at 100°C on heating and decreases by this factor at 60°C on cooling, thus exhibiting the thermal hysteresis of this ferroelectric transition. The spin-lattice relaxation was also investigated. From measurements at 9.14 MHz the observed longitudinal relaxation time T₁ appears to be dominated by the dynamics of the amorphous phase and exhibits no anomaly through the phase transition. However, from measurements at 20 MHz, well defined minima of T₁ were observed, which are associated with the ferroelectric transition (especially after repeated annealing of the samples). Results are discussed in terms of the crystalline phase structure, which appears dynamically disordered above the ferroelectric phase transition. An analogy is considered with the plastic phase transitions encountered in molecular crystals.