抽油杆井口无损探伤装置的研制及应用

对于有杆泵采油井，抽油杆缺损是影响抽油井免修期最主要因素之一。抽油杆缺陷井口探伤检测装置是根据电磁感应涡流原理设计研制的，解决了油井作业过程中对抽油杆缺陷的探伤检测问题，从而淘汰缺陷超值杆。315口井抽油杆的现场应用情况表明，该装置保证了下井抽油杆的质量，解决了人工挑选过程中存在的弊端，延长了抽油杆的免修期。     

纤维体积分数对K3D/MCPA复合材料力学性能的影响

本文研究了纤维体积分数对三维编织芳纶纤维增强铸性尼龙(简称K3D／MCPA)复合材料力学性能的影响。研究表明，K3D／MCPA复合材料有优异的抗冲击性能，冲击强度比三维编织芳纶纤维增强铸性尼龙(简称C3D／MCPA)和纯基体均有大幅度的提高，且随着纤维体积的提高而升高。K3D／MCPA复合材料剪切强度随纤维体积比的增大而增大，其纵向剪切强度低于纯基体和C3D／MCPA复合材料，但其横向剪切强度高于它们。K3D／MCPA复合材料弯曲强度与弯曲模量随纤维体积比的提高而提高，但与相同体积比的C3D／MCPA相比，K3D／MCPA的弯曲强度与弯曲模量均较低。     

连铸净化加压站改造

因攀钢动力厂连铸加压站的高压焦炉煤气供应不能满足生产需要，对它进行了相应改造。使工艺更加完善，煤气净化质量得到提高，并解决了生产中的一些问题。     

Influence of Billet Size on Flow, Solidification and Solute Transport in Continuous Casting

ListofSymbol　　B———Buoyancy ,m·s- 2 ;　　c———Concentrationofsoluteelement ;　　Cμ———Turbulentconstant;　　D———Diffusivityofsoluteelement ,m2 ·s- 1 ;　　fl,fs———Liquidandsolidfraction ;　　fμ———Turbulentcoefficient ;　　h———Enthalpy ,J·kg- 1 ;　　k———Turbulentkineticenergy ,m2 ·s- 2 ;　　kp———Equilibriumpartitioncoefficient;　　Kp———Permeabilityofmushyzone ,m2 ;　　K0 ———Permeabilitycoefficient;　　p———Pressure ,Pa ;　　Pr———Prandtlnumber ;…     

Plastic deformation of bcc metal thin foils without dislocation

Heavy plastic deformation of fcc metal thin foils to fracture has been found recently to proceed without involving dislocations, and it results in the formation of high density of vacancy clusters. Thin foil specimens of bcc metals such as V and Mo were plastically deformed to fracture in in situ elongation experiments under an electron microscope. Morphology of thinning and fracture was found to be similar to fcc metals, and no dislocation was observed during heavy deformation. Electron diffraction analysis at the tip of a crack during deformation confirmed a large elastic deformation of up to 5%. Unlike in fcc metal thin foil specimens, point defect clusters were not observed near fractured tips. This difference is attributed to the difference in vacancy reaction, though the deformation in bcc metals without dislocation most likely does produce vacancies.     

Formation of ordered microporous films with water as templates from poly(D,L‐lactic‐co‐glycolic acid) solution

Recently a method that uses water droplets at the air–solution interface as an ordered template was reported for the preparation of ordered micrometer‐size honeycomb structures. Here we show that the method can also be used for formation of honeycomb‐like porous films from random copolymers with certain hydrophilicity, besides those polymers with defined structures such as block copolymers, starlike homopolymers, amd amphiphilic polymers. This demonstrates that the stabilization of water droplets is the key factor for the regular structure. Also we indicate that size and structure of the films can be regulated by such variables as concentration and atmospheric humidity. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 90: 1846–1850, 2003     

Research and application of automatic control system of argon blowing at ladle shroud

Argon blowing at the ladle shroud requires the best flow control strategy to effectively avoid the secondary oxidation of molten steel, slag entrapment and heat loss during the casting of the tundish, and at the same time, give full play to the role of bubbles to remove inclusions. Therefore, an automatic control system for argon blowing at the ladle shroud was proposed. The data collected by S7-300PLC and software programming were used to adjust the argon blowing flow online in real time according to factors such as pouring and continuous pouring. On this basis, PID control algorithm and closed loop control mechanism were used for real time adjustment. The flow control valve ensures theminimum deviation between the actual value of the flow and the set value. The production data of this system in the first quarter of 2021 in a special steel plant show that the proportion of furnaces with an acid soluble aluminum (Als) loss percentage of less than 10% of each steel grade has increased by 5.52%, and the proportion of furnaces with an Als loss percentage of more than 60% has increased from 1% decrease to 0. The actual application results show that the use of the system improves the surface quality of the continuous casting slab and the performance of the final product.     

电磁铸造液柱高度数学模型的建立及应用

为了研究熔体金属电磁立柱成形能力并计算电磁作用下的液注高度,从电磁铸造立柱成形的基本原理出发,建立了电磁场作用下金属立柱成形时液柱高度数学模型,并试验验证了模型的准确性.利用液柱高度数学模型对铝、钢、锡铅合金等金属的电磁铸造可行性,以及电力参数对液柱高度的影响进行研究.结果表明:铝电磁无模成形能力最强,而钢及锡铅合金电磁无模成形能力则基本相同;钢及锡铅合金电磁立柱成形所需的磁感强度约为0.08～0.10 T,而铝则只需约0.04T.     

稀土Pr对Al2O3-SiO2(Sf)/ZL109复合材料组织及性能的影响

本文采用挤压浸渗法 ,制得不同稀土含量的硅酸铝短纤维增强铝基复合材料。用光学显微镜观察了复合材料的铸造显微组织 ,分析了稀土含量对共晶硅组织形态的影响 ;用扫描电镜对复合材料基体中的稀土相进行了观察 ,探索了稀土相的分布位置及其形态 ;并对不同稀土含量的复合材料进行了摩擦磨损实验 ,结果表明稀土能增强复合材料的耐磨性     

离心浇铸法制备光谱控制样的分析研究

本文研究了应用高频熔化、冶炼、离心浇铸成型新技术,制备光谱控制样的方法及可行性,研究证明,利用本方法制备出的光谱控制样表面光洁度高,均匀性好,且组织结构和基体成份与分析试样一致,可用于光谱分析中工作曲线的校准和质量控制.