新建本科院校数学与应用数学专业程序设计语言课程设置与教学

程序设计语言课程是数学与应用数学专业的基础课,设置合理的课程体系是新建本科院校人才培养模式的一个重要环节,以专业需求和培养学生综合素质为目的,根据目前流行的程序设计语言,从课程选择与设置、教材建设、加强实践教学和改进教学手段等方面做了探讨。     

基于改进GA的救援物资中转网点定位

针对大规模救援物资调运的多目标中转运输网点定位问题,考虑运输费用、中转网点的作业变动费用和运输时间,建立一个救援物资中转运输网点的非线性多目标混合整数规划模型。为有效求解该模型,提出一种基于矩阵编码的遗传算法,利用费用矩阵标杆的寻优导向信息提高遗传变异算子的局部搜索能力,提高全局收敛速度。通过算例分析验证该模型和算法的有效性。     

Phase change materials in the ternary system NH4Cl+CaCl2+H2O

Solubility isotherms of the ternary system (NH₄Cl+CaCl₂+H₂O) were elaborately determined at T= (273.15 and 298.15) K by using the isothermal method. In the equilibrium phase diagram, there are two solubility branches corresponding to the solid phases CaCl₂⋅6H₂O and NH₄Cl. Invariant point compositions are 36.32 wt% CaCl₂ and 3.4 wt% NH₄Cl at 273.15 K, and 45.86 wt% CaCl₂ and 5.22 wt% NH₄Cl at 298.15 K. A Pitzer-Simonson-Clegg thermodynamic model was applied to represent the thermodynamic properties of this ternary system and to construct a partial phase diagram of the ternary system at temperatures between (273.15 and 323.15) K. It was found in the predicted solubility phase diagram that the double salt 2NH₄Cl⋅CaCl₂⋅3H₂O, found by other authors at (323.1 and 348.1) K, will disappear at temperatures below 298.15 K. Besides, it was found that there are two peritectic points in the ternary system with peritectic temperatures at 299.65 K and 298.15 K, and the former peritectic point falls just on the line between the composition points of NH₄Cl and CaCl₂⋅6H₂O. According to phase rule, a solution made of this point will begin to crystallize at 299.65 K and end at 298 K and therefore can be acted as a “pseudo eutectic” phase change material (PCM). A heat storing and releasing experiment of 50 grams of the PCM was carried out, obtaining a satisfying result.     

Product structure (BOM)-based product similarity measures using orthogonal procrustes approach

In geometry, two configurations are called similar if they can be brought to a complete match by rigid motions and dilations. In the simplest case, product designs X and Y have the same dimensionality and same number of points which can be brought into a one to one correspondence by substantive considerations. Under orthogonal transformations, product design Y can only be rotated and reflected in order to approximate product design X. As for the “as close as possible” or “relatively close” criterion, a reasonable definition would be to measure the distances between corresponding points, square these values, and add them to obtain the sum-of-squares criterion L. In this paper, a product structure (BOM)-based product similarity measures using orthogonal procrustes approach is proposed. A structural product is first transformed into bill of materials (BOM), the structural similarity measurement between a product query and target product is calculated and evaluated using orthogonal procrustes approach. The results show that the proposed product structure similarity measure method can help companies find desired product information based on BOM feature.     

Temperature sensor based on the Er green upconverted emission in a fluorotellurite glass

The temperature dependence of the green upconverted emission from the two thermally coupled ²H_11/2 and ⁴S_3/2 levels of the Er³⁺ ion in a fluorotellurite glass has been analyzed as a function of the optically active ion concentration in order to check its availability as a temperature sensor. The infrared-to-green upconverted emission have been observed by the naked eyes after a cw laser diode excitation at 800 nm. The fluorescence intensity ratio between the thermally coupled emitting levels as well as the temperature sensitivity has been experimentally obtained up to 540 K. A better behaviour as a temperature sensor has been obtained for the less Er³⁺ concentrated glass with a maximum sensitivity of 54 × 10⁻⁴ K⁻¹ at 540 K, one of the highest found in rare-earth doped transparent materials.     

Irreversible sensing of oxygen ingress

Absorption-based opto-chemical sensors for oxygen are presented that consist of leuco dyes (leuco indigo and leuco thioindigo) incorporated into two kinds of polymer matrices. An irreversible and visible color change (to red or blue) is caused by a chromogenic chemistry involving the oxidation of the (virtually colorless) leuco dyes by molecular oxygen. The moderately gas permeable copolymer poly(styrene-co-acrylonitrile) and a highly oxygen-permeable polyurethane hydrogel, respectively, are used in order to increase the effective dynamic range for visualizing and detecting oxygen. We describe the preparation and properties of four different types of such oxygen sensors that are obtained by dip-coating a gas impermeable foil made from poly(ethylene terephthalate) with a sensor layer composed of leuco dye and polymer.     

Free vibration analysis of functionally graded conical, cylindrical shell and annular plate structures with a four-parameter power-law distribution

Based on the First-order Shear Deformation Theory (FSDT) this paper focuses on the dynamic behavior of moderately thick functionally graded conical, cylindrical shells and annular plates. The last two structures are obtained as special cases of the conical shell formulation. The treatment is developed within the theory of linear elasticity, when materials are assumed to be isotropic and inhomogeneous through the thickness direction. The two-constituent functionally graded shell consists of ceramic and metal. These constituents are graded through the thickness, from one surface of the shell to the other. A generalization of the power-law distribution presented in literature is proposed. Two different four-parameter power-law distributions are considered for the ceramic volume fraction. Some material profiles through the functionally graded shell thickness are illustrated by varying the four parameters of power-law distributions. For the first power-law distribution, the bottom surface of the structure is ceramic rich, whereas the top surface can be metal rich, ceramic rich or made of a mixture of the two constituents and on the contrary for the second one. Symmetric and asymmetric volume fraction profiles are presented in this paper. The homogeneous isotropic material can be inferred as a special case of functionally graded materials (FGM). The governing equations of motion are expressed as functions of five kinematic parameters, by using the constitutive and kinematic relationships. The solution is given in terms of generalized displacement components of the points lying on the middle surface of the shell. The discretization of the system equations by means of the Generalized Differential Quadrature (GDQ) method leads to a standard linear eigenvalue problem, where two independent variables are involved without using the Fourier modal expansion methodology. Numerical results concerning six types of shell structures illustrate the influence of the power-law exponent, of the power-law distribution and of the choice of the four parameters on the mechanical behaviour of shell structures considered.     

The effect of a lower extremity kinematic constraint on lifting biomechanics

Leaning against a stationary barrier during manual materials handling tasks is observed in many industrial environments, but the effects of this kinematic constraint on low back mechanics are unknown. Thirteen participants performed two-handed lifting tasks using both a leaning posture and no leaning posture while trunk kinematics, muscle activity and ground reaction force were monitored. Results revealed that lifting with the leaning posture required significantly less activity in erector spinae (26% vs. 36% MVC) and latissimus dorsi (8% vs. 14% MVC), and less passive tissue moment compared with the no leaning posture. Peak sagittal accelerations were lower when leaning, but the leaning posture also had significantly higher slip potential as measured by required coefficient of friction (0.05 vs. 0.36). The results suggested that the leaning lifting strategy provides reduced low back stress, but does so at the cost of increased slip potential.     

Modeling of axis-symmetric steam plasma flow in a non-transferred torch

This paper discusses the numerical modeling of steam plasma in a DC non-transferred torch equipped with well-type cathode, where the non-trivial azimuthal velocity component and turbulent effect are both taken into account. In order to investigate the complicated flow characteristics of thermal plasma due to the interaction between steam and electric arc, the flow filed inside the plasma torch is modeled by the magnetic–hydrodynamic (MHD) equations. The governing equations are then solved numerically using a non-staggered finite volume discretization based on Cartesian grid system. The anode location and maximum current density at cathode are fixed by the corresponding experimental measurement at a given flow rate. The predicted result suggests that the steam plasma can be accelerated to a mean velocity of 1500 m/s at torch outlet with the mass flow rate of 5 g/s and the system current of 180 A. A strong vortex flow structure is found inside the torch due to the introduction of azimuthal velocity at the gas inlet, which should help to stabilize the rotating arc during the torch operation.     

CRT and LCD monitor and process materials evaluated for environmental improvement

Decision rules have been developed and applied to the bills of materials of a color cathode‐ray tube (CRT) and a liquid‐crystal‐display (LCD) desktop monitor to determine which product and process materials will be evaluated in an environmental life‐cycle assessment. Materials of significant mass, of technological importance, and of potential environmental impact are targeted. The list of materials identified are those for which life‐cycle inventory data will be obtained for the materials extraction and materials processing life‐cycle stages of a CRT and an LCD. Additionally, materials identified will also be used to represent life‐cycle impact in terms of resource consumption, as well as surrogates for occupational health impacts.