DSC and DMTA characterization of ternary blends

The phase behavior of ternary blends made of poly(epichlorohydrin) (PECH), poly(vinyl acetate) (PVAc) and poly(methyl methacrylate) (PMMA) has been investigated by differential scanning calorimetry (DSC) and dynamic mechanical thermal analysis (DMTA). DMTA measurements have been shown to be more sensitive than DSC for the detection of a second phase, for the determination of the composition of each phase, and the distribution of PECH in each of them. About 70% PECH was required to obtain a single narrow T_g in the ternary system, which suggests a single homogeneous phase in the limit of sensitivity of DMTA. This study also emphasizes the importance of the composition of the immiscible polymer pair (i.e. the PVAc/PMMA pair in the PECH/PVAc/PMMA system), in addition to the thermodynamic interaction parameters, for controling the phase behavior of ternary systems.     

聚氧化乙烯—聚磷酸钠共混物的钠离子导电性

研究了聚氧化乙烯-聚磷酸钠共混物的钠离子导电性和低分子量多缩乙二醇对共混物导电性的改进作用。结果表明,降低多缩乙二醇的分子量以及增加其含量都有利于提高共混物的离子导电率。增塑剂改进共混物导电性的实质是提高共混物的非晶相含量,共混物内钠离子传导发生在非晶区,聚合物链段运动是离子传导的主要推动力。     

Retention of gallium ions from acidic solutions by pyridine strong‐base anion exchangers

Using the batch method, the retention of Ga(III) from HCl solutions by two gel‐type pyridine strong‐base anion exchangers containing 1‐methyl‐ or 1‐butyl‐4‐vinylpyridinium chloride structural units, called S₁ and S₂ resins, respectively, was studied. The influence of the HCl and Ga(III) concentrations as well as of the contact time between the resin and the liquid phase was investigated. The parameters, which characterize the retention process, were estimated using Langmuir and Freundlich isotherms. Both resins exhibited a higher affinity for gallium ions from a 6M HCl solution. According to Langmuir isotherms, maximum retention capacities of 44.44 and 60 mg Ga(III)/g dry resin for the S₁ and S₂ resins, respectively, were obtained. Freundlich isotherms provide additional proof for a higher affinity of the S₂ resin for Ga(III) from HCl solutions. It is clear that the substituent length increase on N⁺ atoms led to an increasing affinity of the pyridine strong base anion exchangers toward Ga(III). © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 86: 3440–3444, 2002     

阳离子型聚丙烯酰胺絮凝剂的开发与应用

阳离子型聚丙烯酰胺具有许多优点，极具开发研究价值，是重要的高分子絮凝剂。介绍了阳离子型聚丙烯酰胺絮凝剂的制备方法，应用及其絮凝作用机理，并分析了其发展方向。     

交联型聚醚聚氨酯的表征、力学性能及其碱金属盐络合物的导电性能

采用三羟甲基丙烷（ＴＭＰ）作交联剂与聚乙二醇（ＰＥＯ－１５４０）和甲苯二异氰酸酯（ＴＤＩ）反应，得到了具有较好力学性能的交联型聚醚聚氨酯（ＰＥＵ），该聚合物与ＬｉＣｌＯ４的结合物具有较高的室温电导率（σ３０℃＝１．８７×１０￣（－４）Ｓ／ｃｍ）。采用全反射红外光谱（ＡＴＲ－ＩＲ）对聚合物的结构进行了表征。对聚合物的组成、不同ＴＤＩ类型及络合盐浓度对聚合物力学性能及其络合物电导率的影响进行了探讨。低度交联聚合物的络合物，其电导率与温度的关系符合建立在自由体积理论上的ＶＴＦ方程，表明络合物中离子的传导主要是在无定形区域进行，与自由体积有关。     

Rapid analysis of polymer homologues and additives with SFE/SFC-MS coupling

A rapid and easy analysis method for polymers is presented. The method involves sample preparation by SFE, separation of the extracted compounds by SFC and simultaneous quantitative detection by FID, as well as identification of unknowns by MS. The applications illustrate how structural research work and routine polymer analysis can be done with this time saving method.     

Effect of the polymer matrices on the dielectric behavior of a percolative high-k polymer composite for embedded capacitor applications

High dielectric constant (high-k) polymer composites are of great interest for embedded capacitor applications. Previously, we demonstrated that epoxy—aluminum composites are promising for embedded capacitor applications, because they have a high dielectric constant and a low dielectric loss due to the core—shell structure of the self-passivated aluminum particles. In this work, to further understand the dielectric behavior of aluminum composites, lower-loss polymers such as silicone, polyimide, polynorbornene, and benzocyclobutene were explored as matrices for the aluminum composites. It is found that the polymer matrices can significantly change the dielectric properties of the aluminum composites. A polymer matrix with a lower dielectric constant generally results in a lower dielectric constant of its aluminum composites. In this regard, polymer—aluminum composites have a similar dielectric characteristic as polymer—ceramic composites. Thermomechanical properties of aluminum composites were characterized by a thermomechanical analyzer.     

聚合物-蒙脱石纳米复合材料的制备、结构与性能

从结构与性能的观点出发,将聚合物-蒙脱石纳米复合材料划分为插层型、层离型和混合型(插层型+层离型),探讨了影响蒙脱石纳米化的因素,提出了蒙脱石纳米化中值得注意的几个问题.     

新型阳离子聚合物NCP的合成及应用

介绍了用高分子反应法在固态条件下合成高阳离子度阳离子聚合物NCP的方法,确定了其最佳反应条件,测定了聚合物阳离子度和反应效率.采用L9（34）正交试验法得出合成NCP的最佳反应条件为：聚合物与阳离子化试剂质量比为11：3;催化剂用量为1.072%,反应时间为2.5 h;反应温度为80℃.实验结果表明,在反应体系中加入催化剂和少量有机或无机溶剂可显著提高反应速率和效率;使用少量润湿剂,可最大限度地限制副反应,造成反应部位的局部浓度高,提高反应效率.阳离子聚合物NCP可作为增粘降滤失剂用于配制正电性钻井液,效果优良,且耐温性能良好,同时基于阳离子与阴离子聚合物在溶液中生成凝胶状沉淀物的特性,NCP还可用于解决注聚区块生产井产出水中含高浓度聚合物的问题.     

驻极体声传感器及其储电材料的现状

综述了驻极体声传感器及其储电材料近年来的迅猛发展。传统的FEP(tetrafluoroethylene—hexa—fluoropropylene copolymer)极体电容式声传感器及以铁电聚合物PVDF(poly vinylidene fluoride)家族为芯片的声传感器和超声抉能器仍焕发着青春活力。Si基微型驻极体声传感器的理论和实验研究已经日趋成熟，而用空间电荷型多孔聚合物驻极体压电薄膜为芯片可望研制出新一代声电和电声传感器、压力传感器和驱动器。