埃及Ain Sukhna Ezz带钢厂的电弧炉

埃及Ain Sukhna Ezz带钢厂的电弧炉是达涅利公司建造的最大的电弧炉之一,由于可选用多种入炉原料,采用最优化熔炼和精炼方法,可在电弧炉上以转炉生产成本生产转炉优质钢种.     

The intervalley X6→Γ6, L6 scattering time in GaAs measured by ultrafast pump-probe infrared absorption spectroscopy

A direct measurement of the dynamics of electrons in the X₆ valley for a GaAs crystal by time-resolved absorption spectroscopy is reported for the first time. IR picosecond probe pulses were used to monitor the growth and decay of the population in the X₆ valley subsequent to excitation by a 527 nm pump pulse. The intervalley X₆→Γ₆, L₆ scattering time t_x of 0.70 ± 0.50 ps is determined and the crossection for the X₆→X₇ transition is estimated to be 1.8 × 10⁻¹⁶ cm².     

Evaluation of different coating systems by electrochemical methods

Corrosion protection of organic coated steel is determined by free corrosion potential measurements and impedance spectroscopy. The results are classified by means of very basic considerations and evaluation figures are developed. These electrochemical data are correlated with the extent of the corrosion for each coating system. The evaluation figures are used for ranking coating systems and this ranking is correlated with the ranking with reference to the results of standardized and exposure tests.     

石化行业自动化控制仪表常见故障分析及其处理

介绍化工生产过程中仪表故障及其处理措施。     

电导法测定乙酸解离常数实验数据处理软件设计

介绍了用电导法测定乙酸解离常数的实验原理和步骤,给出了用计算机对电导法测定乙酸解离常数的实验数据进行处理的软件设计方法,同时给出了用Visual FoxPro 6.0编写电导法测定乙酸解离常数的处理软件的基本结构和部分程序代码。     

关于新建炉EDTA低浓度清洗的探讨

阐述了EDTA清洗锅炉的基本原理,低浓度清洗新建炉的工艺、方法及控制要点,EDTA低浓度清洗与协调EDTA清洗的经济性比较,为新建炉EDTA低浓度清洗探索了方向。     

裂纹对石墨烯拉伸力学性能影响的数值仿真

为研究裂纹对石墨烯力学性能的影响,以锯齿型石墨烯为研究对象,基于分子动力学方法,采用Tersoff势函数分析裂纹长度对石墨烯拉伸力学性能的影响以及含有裂纹的石墨烯在不同应变率下的拉伸变形破坏过程.结果表明,裂纹长度的增加大大减小石墨烯的抗拉强度和抗拉应变,对弹性模量有一定影响;裂纹降低石墨烯的抗拉应变对应变率的敏感性,但对于含有裂纹的石墨烯,仍可以增大加载速率来提高石墨烯的抗拉性能.     

Experimental investigation and thermodynamic modeling of the Mg–Sn–Sr ternary system

The isothermal sections of the Mg–Sn–Sr ternary system in the Mg-rich region at 415 and 350 °C have been determined using the scanning electron microscopy (SEM) equipped with energy dispersive X-Ray spectrometry (EDS). The existence of the MgSnSr ternary compound was confirmed in these two isothermal sections. Two new compounds, named Mg₅Sn₃Sr and Mg₂₅Sn₂₄Sr_14, were found in the present work based on the SEM/EDS results. Thermodynamic optimization of the Sn–Sr binary and Mg–Sn–Sr ternary systems were carried out using the CALPHAD (CALculation of PHAse Diagrams) technique. The Modified quasi-chemical model (MQM) was used for the liquid solution which exhibits a high degree of short-range ordering behavior. The solid phases were described with the Compound energy formalism (CEF). Finally, a self-consistent thermodynamic databases for the Mg–Sn–Sr ternary system has been constructed in the present work, which can be an efficient and convenient guidance to investigate and develop the Mg-based alloys.     

基于IEC61131-3标准的PLC编辑模块设计与实现

基于IEC61131-3标准设计一个可编程逻辑控制器（PLC）编辑模块,并给出了主要数据结构和算法的设计。通过测试表明用户界面友好,操作简单,对后续开发具指导意义。     

基于2,4-二羟基苯甲酸铜(Ⅱ)为载体的硫氰酸根电极的电位响应

制备了基于一种简单的金属铜配合物2,4-二羟基苯甲酸铜(Ⅱ)(Cu(Ⅱ)DHBA)为载体的PVC膜硫氰酸根离子(SCN-)选择性电极。该电极在1.0×10-1～1.0×10-6mol/LSCN-浓度范围内呈现斜率为-59.5mV/dec的近Nernst电位响应,检测下限为9.1×10-7mol/L。利用紫外可见光谱及交流阻抗技术初步探讨了电极对SCN-呈现的选择性电位响应机理。该电极作为直接电位分析法的指示电极,成功运用于实验室废水中硫氰酸盐含量的测定。