Synthesis and characterization of novel diimide–dinaphthols and resulting poly(urethane–imide)s

Novel diols containing imide groups were prepared via condensation of aromatic dianhydrides with 5‐amino‐1‐naphthol. The diimide–dinaphthols prepared were characterized by conventional methods and used to synthesize new poly(urethane–imide)s (PUIs). All the polymers were characterized and their physical properties, such as solubility, solution viscosity, thermal stability, and thermal behaviour were studied. The polymers obtained showed more thermal stability than typical polyurethanes because of the presence of the imide groups. Copyright © 2003 Society of Chemical Industry     

Gender differences in computerised and conventional educational tests

Abstract Research has demonstrated girls to outperform boys on conventional literacy tests. The present studies concern gender differences on computerised educational tests. Seventy-one children were tested using LASS Secondary and a set of seven conventional measures. No significant gender differences were found on any of the LASS Secondary modules, although females did outperform males on a conventional spelling test. A further 126 pupils were tested on computerised and paper versions of the LASS Secondary reading, spelling and reasoning modules. No gender differences were found on the computerised versions, but there were significant differences on the paper versions of the reading and spelling modules favouring females. In a third study, 45 children were administered computerised and paper versions of the LASS Junior reading and spelling modules. There were no significant differences on the computerised modules, but girls performed significantly higher than boys on the paper version of the spelling module. It is possible that computerised assessment does not detect the established gender effect due to differences between males and females in motivation, computer experience and competitiveness. Further large-scale studies are necessary to confirm these findings.     

OPGW应用问题的探讨

根据多年的光纤复合架空地线(0PGW)应用经验与实践，从0PGW结构及组成、光纤余长、线路配合、金具配套、0PGW安装等方面，对0PGW应用中的若干问题进行详细的探讨。     

光纤智能复合材料

对光纤型智能复合材料的工作原理，性能特点和应用前景作了介绍，并讨论了制造成型的技术问题。     

Testing the robustness of CIECAM02

CIE TC8‐01 has adopted a new color appearance model: CIECAM02¹ replaces the CIECAM97s.² The new model consists of a number of refinements and simplifications of the CIECAM97s color appearance model. This article describes further tests to the robustness of the forward and reverse modes. © 2005 Wiley Periodicals, Inc. Col Res Appl, 30, 99–106, 2005; Published online in Wiley InterScience (www.interscience.wiley.com). DOI 10.1002/col.20087     

Analysis of low load transients for the Vandellòs-II NPP: Application to operation and control support

The Technical University of Catalonia (UPC) has been jointly working with the Asociación Nuclear Ascó-Vandellòs (ANAV) for a number of years in order to establish, qualify and use best estimate (BE) models for the reactors under the control of ANAV. ANAV is the consortium that is responsible for operation of the Ascó and Vandellòs-II reactors. The reactors are Westinghouse-design three-loop PWRs with an approximate electrical power of 1000 MW. The existing integral plant models for each plant are currently used for many different purposes among which are support of plant operation and control. Quite a number of studies have been done in order to improve both safety and plant competitiveness. Most of these dynamic analyses were carried out in relation to transients starting at nominal full power or at least, very close to full power. This paper develops a specific use of the Vandellòs-II plant model for operation and control support at low power involving new ranges of system actuation parameters. It also examines scenarios that are somewhat different from those typically analysed. The study starts showing the results of an assessment case, which is a start-up test and provides some additional qualification, and subsequently attempts to establish calculations to support both an improvement in feed water controls and to set up operating recommendations for low-load manual operation of feed water turbo-pump. Both results hopefully, will produce an outcome, which leads to an improvement in safety and reduces reactor trip probability.     

Marmaray project: Tunnels and stations in BC contract

Istanbul is one of the most famous historical cities in the world. However, the project alignment selected as the best of a range of alignments cannot avoid passing beneath the historical and cultural heritages of Istanbul as well as under ancient and densely inhabited areas of the city. This paper will explain some of the challenges related to the bored tunnels.

Historical buildings are vulnerable. Yet many existing residential and office buildings are old and constructed on minimal foundations. As a consequence, it is vital that any drawdown of groundwater and any ground settlements have to be minimized.

In addition, the connection between the immersed and bored tunnels will be made directly and totally underground, without the usual intermediate shafts and beneath the deep waters of the Bosphorus Strait. This operation needs the utmost control of the tunnel excavation face to ensure its stability and to minimize water ingress. Based on such considerations, tunnel excavation by tunnel boring machine (TBM) using a slurry shield and having the ability to operate under high pore pressures was recommended as the method of excavation for the main running tunnels.

The paper will explain how the design team from Avrasyaconsult – the Employer’s Representative – arrived at the final minimum, specific and functional requirements of the bored tunneling works which are to be carried out using the ‘FIDIC EPC/Turnkey Project’ conditions.     

A novel methanol-tolerant Ir-Se chalcogenide electrocatalyst for oyxgen reduction

A novel methanol-tolerant oxygen-reduction catalyst, Iridium-selenium (Ir-Se) chalcogenide, was synthesized by chemical precipitation in an organic solvent. Auger electron spectroscopy (AES) analysis confirmed that the synthesized Ir-Se chalcogenide had a chemical formula of Ir₄Se. This chalcogenide showed strong catalytic activity towards the oxygen reduction reaction (ORR) and a high methanol tolerance. It was found that most of the oxygen could be directly reduced to water through a four-electron pathway with less than 10% hydrogen peroxide (H₂O₂) being produced during the ORR. The improvement in catalytic activity of the Ir-Se chalcogenide in comparison with that of pure Ir might be attributed to the effect of a bimetallic interaction.     

高能球磨AL─Cu合金固态合成反应研究

采用扫描电镜、能谱分析、Ｘ射线衍射和示差扫描量热分析研究了具有较大负混合焓的Ａｌ＿ｘＣｕ＿（１－ｘ）对称扩散系合金的高能球磨固态合成反应。高能球磨时组元晶粒细化达纳米级，造成纳米晶界亚互溶，为室温固态合成反应创造了条件，球磨强度对反应进程影响显著，在ｘ＝０．３～０．７范围内仅形成一种金属间化合物。