论包装设计的审美心理

随着市场经济的发展,人们不仅仅满足于物质的生活,开始提升自我的精神生活享受,越来越关注于包装的审美感.通过讨论审美心理学原理、美学原理,结合包装设计的应用分析,研究审美心理在商品包装中的活动过程,从而解析包装设计的审美特点,为促进包装设计契合审美心理的研究而持续发展提供了理论依据.     

A general approach for estimating scale score reliability for panel survey data.

Scale score measures are ubiquitous in the psychological literature and can be used as both dependent and independent variables in data analysis. Poor reliability of scale score measures leads to inflated standard errors and/or biased estimates, particularly in multivariate analysis. Reliability estimation is usually an integral step to assess data quality in the analysis of scale score data. Cronbach’s α is a widely used indicator of reliability but, due to its rather strong assumptions, can be a poor estimator (L. J. Cronbach, 1951). For longitudinal data, an alternative approach is the simplex method; however, it too requires assumptions that may not hold in practice. One effective approach is an alternative estimator of reliability that relaxes the assumptions of both Cronbach’s α and the simplex estimator and thus generalizes both estimators. Using data from a large-scale panel survey, the benefits of the statistical properties of this estimator are investigated, and its use is illustrated and compared with the more traditional estimators of reliability. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Photopolymerizable liquid encapsulants for microelectronic devices: Thermal and mechanical properties of systems with reduced in‐mold cure times

Photopolymerizable liquid encapsulants (PLEs) for microelectronic devices may offer important advantages over traditional transfer molding compounds, including reduced in‐mold cure times, lower thermal stresses, and reduced wire sweep. In this contribution, we discuss an encapsulation process based upon a low viscosity resin that cures rapidly upon exposure to UV light. These highly filled PLEs are comprised of an epoxy novolac‐based vinyl ester resin (～25 wt %), fused silica filler (70–74 wt %), photoinitiator, silane coupling agent, and, in some cases, a thermal initiator. We have characterized the material properties (flexural strength and modulus, coefficient of thermal expansion, glass transition temperature, and thermal stress parameter) of PLEs cured with UV illumination times of 60, 90, and 120 s, as well as, the thermal conductivity and adhesive peel strength of PLEs photocured for 90 s. In addition, we investigated the effect of the fused silica loading and the initiation scheme on these properties. The results indicate that the PLEs are very promising for microelectronic encapsulation. These liquid encapsulants cure (to an ejectable hardness) in 1 min for an initiating light intensity of 200 mW/cm², and exhibit appropriate values for the thermal and mechanical properties listed above. © 2001 John Wiley & Sons, Inc. J Appl Polym Sci 81: 3449–3461, 2001     

Convenient thionation of triglycerides with lawessons reagent

Thionation using the Lawesson’s reagent (LR) led to quantitative and selective replacement of carbonyl groups (C=O) with thionocarbonyl groups (C=S). Mixtures of thionotriglycerides were obtained by reaction of 2,4-bis (p-methoxyphenyl)-1,3-dithia-2,4-diphosphetane-2,4-disulfide in suspension with triglycerides (TG). With a molar ratio (LR)/(TG)=3∶2, there was complete exchange of C=O with C=S in the carboxylic groups of the TG. The yield is over 90%. The two P=S ligands in the LR confer a double reactivity, producing a high power of thionation. Fourier transform infrared spectroscopy was employed for quantitative and qualitative characterization of the thionated TG and for monitoring the progress of partial or total thionation as conditioned by the molar ratios of the starting compounds. Thus, with molar ration LR/TG of 0.108, 0.36, and 0.72, we obtained around 6, 20, and 40% of C=O conversion, respectively.     

Carbothermal nitridation process of mechanically milled silica sand using Taguchi's method

This paper reported on the work performed to study the formation of silicon nitride and silicon carbide whiskers using the carbothermal nitridation process. A distinctive aspect of the present study lies in the use of the mechanical milling method to alter the regularity of the crystalline network of the silica sand. In order to optimise the processing parameters for the synthesis of silicon carbide, the concept of Taguchi's Design of Experiments was considered, the analysis being based on Taguchi's signal to noise ratio and variance techniques to obtain optimum combination of process parameters. Important factors influencing the formation of silicon carbide were the duration of the mechanical milling, followed by temperature, time and heating rate.     

A novel fault diagnosis method of bearing based on improved fuzzy ARTMAP and modified distance discriminant technique

This paper presents a novel intelligent diagnosis method based on multiple domain features, modified distance discrimination technique and improved fuzzy ARTMAP (IFAM). The method consists of three steps. To begin with, time-domain, frequency-domain and wavelet grey moments are extracted from the raw vibration signals to demonstrate the fault-related information. Then through the modified distance discrimination technique some salient features are selected from the original feature set. Finally, the optimal feature set is input into the IFAM incorporated with similarity based on the Yu’s norm in the classification phase to identify the different fault categories. The proposed method is applied to the fault diagnosis of rolling element bearing, and the test results show that the IFAM identify the fault categories of rolling element bearing more accurately and has a better diagnosis performance compared to the FAM. Furthermore, by the application of the bootstrap method to the diagnosis results it can testify that the IFAM has more capacity of reliability and robustness.     

Parameter identifiability with Kullback–Leibler information divergence criterion

We study the problem of parameter identifiability with Kullback–Leibler information divergence (KLID) criterion. The KLID‐identifiability is defined, which can be related to many other concepts of identifiability, such as the identifiability with Fisher's information matrix criterion, identifiability with least‐squares criterion, and identifiability with spectral density criterion. We also establish a simple check criterion for the Gaussian process and derive an upper bound for the minimal identifiable horizon of Markov process. Furthermore, we define the asymptotic KLID‐identifiability and prove that, under certain constraints, the KLID‐identifiability will be a sufficient or necessary condition for the asymptotic KLID‐identifiability. The consistency problems of several parameter estimation methods are also discussed. Copyright © 2008 John Wiley & Sons, Ltd.     

连续刚构主墩桩基础设计

对铁路连续刚构桩基础计算模式进行了描述，对主墩桩基础承台进行了抗压、抗拉、抗剪承载力验算，计算结果表明该设计是满足要求的，为以后的设计工作提供了依据。     

Microstructure and mechanical properties of aluminum back contact layers

The overall demand to reduce solar energy costs gives a continuous drive to reduce the thickness of silicon wafers. Handling and bowing problems associated with thinner wafers become more and more important, as these can lead to cells cracking and thus to high yield losses. In this paper the microstructure and mechanical properties of the aluminum on the rear side of a solar cell are discussed. It is shown that the aluminum back contact has a complex composite-like microstructure, consisting of five main components: (1) the back surface field layer; (2) a eutectic layer; (3) spherical (3-5 μm) hypereutectic Al-Si particles surrounded by a thin aluminum oxide layer (200 nm); (4) a bismuth-silicate glass matrix; and (5) pores (14 vol%). The Young’s modulus of the Al-Si particles is estimated by nanoindentation and the overall Young’s modulus is estimated on the basis of bowing measurements. These results are used as input parameters for the improved thermomechanical multiscale model of a solar cell.