用LG55冷轧管机轧制小直径不锈钢管孔型改进

介绍了ＬＧ５５冷轧管机使用Φ７～３２ｍｍ、Φ５０～３２ｍｍ孔型轧制小直径不锈钢管的工艺特点。试验表明，两种孔型可行，且Φ５７～３２ｍｍ孔型的综合使用效果更好。     

接触疲劳过程中的诱发相变和冷作硬化SCIEI

研究了三种丝杠钢的接触疲劳性能。利用TEM和背散射Mossbauer谱研究了三种钢在接触疲劳前后的显微组织结构;测量了接触区中心线下显微硬度随层深的变化。结果表明:接触应力诱发A_R→M相变,并导致一定深度的冷作硬化。讨论了诱发相变和冷作硬化对接触疲劳性能的影响。     

Effect of deposition conditions on the properties and annealing behavior of cold-sprayed copper

The deposition of copper by cold gas dynamic spraying has attracted much interest in recent years due to the capability to deposit low-porosity oxide-free coatings. However, it is generally found that as-deposited copper has a signicantly greater hardness, and potentially lower ductility, than bulk material. In this article, copper was deposited by cold spraying using helium as the driving gas at both 298 and 523 K. Evidence is presented indicating that the material sprayed at the lower temperature exhibits a lower dislocation density throughout the grain structure than the material sprayed at the higher temperature. The low stacking fault energy of copper restricts recovery during annealing, and thus microstructural changes during annealing only proceed once recrystallization begins. The material sprayed at low temperature (with the low dislocation density) exhibited recrystallization at annealing temperatures as low as 373 K with a corresponding reduction in hardness. However, the copper sprayed with helium at 523 K was resistant to annealing at temperatures up to 473 K where the dislocations in the structure prevented recrystallization. However, at higher temperatures, recrystallization did proceed (with corresponding reductions in hardness). The fracture behavior of the copper that was cold sprayed with helium at 523 K, both in the as-sprayed condition and following annealing, was measured and explained in terms of the annealing mechanisms proposed. The original version of this paper was published in the CD ROM Thermal Spray Connects: Explore Its Surfacing Potential, International Thermal Spray Conference, sponsored by DVS, ASM International, and HW International Institute of Welding, Basel, Switzerland, May 2–4, 2005, DVS-Verlag GmbH, Düsseldorf, Germany.     

Microstructure evolution of cold-sprayed coating during deposition and through post-spraying heat treatment

The microstructural features of cold-sprayed coatings were investigated using Cu, Ti and Zn feedstocks by optical microscopy, scanning electron microscopy and transmission electron microscopy to reveal the microstructure evolution mechanisms in cold spray. Four typical effects including tamping, refinement, impact-induced fusion and annealing were examined on microstrueture. It is found that the microstructure of cold spray coating is remarkably influenced by spray materials. Ti coatings consist of evident porous layer and Cu coatings present a limited porous layer only near the surface. It is clear that the successive tamping effect and dynamic refinement of grains significantly influence the microstructure evolution of cold-sprayed coating. The tamping effect leads to the densification of porous coating layer gradually and the refinement effect leads to the formation of fine microstructure. It is considered that the large difference in the formation of porous layer is attributed to the dynamic impact pressure and hardenability of materials. It is also found that the impact-induced fusion during deposition of Zn coating can also modify the interfacial microstructure between particles in cold spray coating. Moreover, the nanocrystalline phase can be formed at the interfaces among particles resulting from the localized melting of the interfaces and tamping effect. Furthermore, the annealing treatment can modify the microstructure and property of a cold-sprayed coating.     

冷轧带钢板形测控技术的发展状况和关键问题

 冷轧带钢属于高端精品钢材,板形在线检测与控制是冷轧带钢的高端核心关键技术。自主创新研制板形测控系统是实现中国钢铁工业发展升级、建设钢铁强国的重大需求。目前,板形测控技术市场国外占据优势,国产系统正在代替进口,扩大应用规模,推进技术完善。研制先进的板形测控系统需要解决的关键技术有高精度高质量的板形仪、功能完备强大的控制手段和方法、高精度高速度的数学模型。板形仪主要有接触式和非接触式两大类,接触式板形仪通过测量带钢张力的横向分布反映板形,非接触式板形仪通过测量带钢浪形反映板形。接触式板形仪可靠耐用精度高,应用广泛,发展趋势为整辊式板形检测辊、无线式信号传输装置、板形数据的精确处理。板形控制数学模型的主要类型,按建模的原理和方法可分为机理模型和智能模型;按模型的性质和作用可分为分析模型和控制模型;按板形的表示方法可分为多点控制模型和分量控制模型。板形控制模型的发展趋势为机理与智能协同建模、动态模拟预报和动态解耦控制、多种手段和方法的协同优化。进一步提高板形测控技术水平需要突破3项关键问题,即整辊式板形仪通道耦合与解耦的机理模型、板形控制的动态模拟和动态解耦模型、板形控制的高精度智能建模方法。     

地锚拉杆整体抗拉强度损失分析

试验表明冷拔圆钢镶锻及热浸镀锌后整体抗拉强度有所下降，本文对这一现象进行了讨论，认为再结晶退火是其主要原因，在试验验证的基础上，提出了涂油镶锻的生产工艺。     

Interfacial energy and match of cold pressure welded Ag/Ni and Al/Cu

The technology of cold pressure welding was adopted to achieve the bonding of Al/Cu(limited soluble and forming compounds),Ag/Ni(hardly mutual soluble),and the relative state of interface was tested by HREM.The results indicate that stable interface is always corresponding to the low interfacial energy value;the stable interface is not coherent but partly-coherent because of the twisting of grain boundary caused by pressure,meanwhile existing dislocation.Namely,the interfacial match and other states under the condition of cold pressure welding are different from the situation that under the condition of thermal action.Moreover,theoretical analyses and calculation on the base of thermodynamics,crystallogeny ,solid physics etc,were discussed.     

MICROSTRUCTURE AND MECHANICAL PROPERTIES OF Mg-Li ALLOY WITH Ca ADDITION

Mg-9wt%Li-2wt%Zn alloy was prepared and studied in this article. The addition of Ca to the alloy from 0.1wt% to 1wt% can refine the α-Mg and the best effect of refinement occurs when Ca content is 0.4wt%-0.5wt%. The billets can be rolled to thin sheets at room temperature, from which it is obvious that the addition of Ca improves alloys ormalin. while it decreases with the excess addition of Ca. The results also show that the ultimate tensile strength （UTS） and yield strength （YS） of the alloy with lwt% Ca may rise by 28% and 25%, respectively, however, the elongation decreases. It is clarified that the adsorption of proper Ca on the grain boundaries refines α-Mg and improves the tensile properties, but the presence of excess Ca and stable Ca2Mg6Zn3phase worsens the elongation.     

普碳钢超大总压下量可逆冷轧工艺技术及生产实践

针对目前我国部分钢企由于现有工艺装备投产较早、技术落后、机组能力不足，只能采取中间退火+二轧程工艺生产0.12～0.15 mm薄规格冷轧产品，生产成本增加、周转周期长，不能灵活应对复杂多变的冷轧市场需求的状况，开发了普碳钢单轧程可以实现95%以上超大总压下量的单机架六辊可逆冷轧机组。结合国内新投产的某1 150 mm单机架六辊可逆冷轧机组的稳定规模化生产实践，阐述了机组工艺设备选型、主要工艺技术参数配置和生产需解决的核心关键技术难点，同时列举了几种市场需求量大、附加值高的薄规格冷轧产品的现场实际生产工艺参数，以说明该机组的实际应用效果。     

冷弯管模具有限元优化设计

采用基于有限元理论的优化设计方法对应用于反变形冷弯管弯曲的模具进行设计研究.将需要进行大量试验来改进的弯管工艺通过计算机模拟仿真来替代,预测出模具的变形和优化工艺参数,从而大大降低了生产加工成本.