基于BIM数据的建筑抗震弹塑性分析建模技术

针对建筑信息模型(Building Information Model,BIM)的共享数据标准为IFC标准,但现有软件导出的IFC格式模型缺少关键数据,不能满足结构非线性抗震分析数据需求的问题,提出建筑抗震弹塑性分析数据基于IFC标准的表达方法,编写C++转换程序将BIM包含的数据正确地转换成不同软件(如Marc和OpenSees等)的模型,从而可以使用不同的结构分析软件实现建筑抗震弹塑性分析.该方法为基于BIM数据实现建筑抗震弹塑性分析提供参考.     

Catalytic conversion of methane to benzene over Mo/ZSM-5

Dehydroaromatization of methane to benzene occurs over a 2 wt% Mo/ZSM-5 catalyst at 700C under non-oxidizing conditions. Following an initial induction period, during which CH₄ reactant reduces the original Mo⁶⁺ ions in the zeolite to Mo₂C and deposition of coke occurs, a benzene selectivity of 70% at a CH₄ conversion of 8–10% could be sustained for more than 16 h. X-ray photoelectron spectroscopy and X-ray powder diffraction measurements indicate that the reduced Mo is highly dispersed in the channels of the zeolite. Initial activation of CH₄ reactant occurs on Mo₂C sites, leading to the formation of C₂H₄ as the primary product. The latter then undergoes subsequent oligomerization reactions on acidic sites of the zeolite to form aromatic products.     

降低全低变工艺阻力的措施

将变换流程改为全低变工艺后,吨氨蒸汽消耗明显下降,但触媒床层阻力迅速上升.通过采取增设焦炭过滤器、更换触媒、改进蒸汽分布器等一系列措施,不仅保证了正常的生产指标,而且还使变换炉的阻力有了明显下降,取得了满意的效果.     

Kinetic modelling of the catalytic conversion of synthesis gas

A kinetic study for the one-step conversion of synthesis gas to gasoline on a ZnO–Cr₂O₃–ZSM-5 catalyst is described. On this catalyst, three reactions are involved in the overall transformation of synthesis gas: the methanol synthesis, the conversion of methanol to hydrocarbons and the water–gas shift reaction. Under the operating conditions selected for the study, it was found that the water–gas shift was at equilibrium and the methanol was completely converted to hydrocarbons. Consequently, it was postulated that the kinetics of the limiting reaction step, the methanol synthesis on the ZnO–Cr₂O₃ component, was the one that controls the overall reaction rate. Three kinetic model equations describing the rate of synthesis gas conversion on the bifunctional catalyst, were considered to fit the data of the experimental runs performed in a Berty well-mixed reactor. Those equations were derived under very special conditions where the methanol decomposition term could be neglected. It was also observed that in the kinetic equations a term involving the fugacity of CO₂ was required to predict the rate properly. The catalyst deactivation was also taken into account in the analysis.     

汽车修补涂料色母用分散剂的选用

通过对树脂、颜料、分散剂和混合溶剂的选择和定量,合成了通用色母。用指研法检验色母的分散稳定性,用倾流法或指擦法检验颜料的流动性,介绍了影响色母分散稳定性和颜料流动性的因素和原理,着重讨论了汽车修补涂料色母的单色浆微脂技术中分散剂的复配分散。     

浅谈中国工笔花鸟画在陶瓷新彩上的表现

论述中国工笔花鸟画的表现手法在陶瓷新彩装饰的结合运用,不同技法的结合追求具有独特的审美效果。     

快速高效隔膜压滤机在鹤壁四矿选煤厂的应用

介绍了快速高效隔膜压滤机的主要性能参数和特点 ;分析了压滤机在煤泥水处理系统中的应用情况和运行结果 ;应用快速高效隔膜压滤机对煤泥水处理系统进行改造后获得了较好的经济及社会效益     

2,4-二氯-3-乙基-6-硝基苯酚的合成

介绍了以对硝基乙苯为原料 ,经三氯异氰脲酸氯化反应、碱解反应和酸化反应 ,高纯度 (大于 99% )、较高收率和较低成本地合成了目的产物的方法。该方法具有氯化试剂的投料量易于控制和反应控制简便等优点     

普钙产品转化率的数值计算方法

对影响普钙产品转化率的各种因素进行了分析,利用MATLAB 软件包得到了转化率的计算公式,提出了确定未分解磷矿的比例和由倍半氧化物引起的有效磷退化幅度的方法,为生产系统的预测和调整提供了一种途径。     

An EM-based identification algorithm for a class of hybrid systems with application to power electronics

In this paper we present an identification algorithm for a class of continuous-time hybrid systems. In such systems, both continuous-time and discrete-time dynamics are involved. We apply the expectation-maximisation algorithm to obtain the maximum likelihood estimate of the parameters of a discrete-time model expressed in incremental form. The main advantage of this approach is that the continuous-time parameters can directly be recovered. The technique is particularly well suited to fast-sampling rates. As an application, we focus on a standard identification problem in power electronics. In this field, our proposed algorithm is of importance since accurate modelling of power converters is required in high- performance applications and for fault diagnosis. As an illustrative example, and to verify the performance of our proposed algorithm, we apply our results to a flying capacitor multicell converter.