500 kV输电线路用复合绝缘子憎水性能分析

介绍了河北省南部电网500 kV输电线路复合绝缘子的运行与试验情况,分析了复合绝缘子憎水性能明显下降的原因。     

复合电耙道浅孔留矿采矿法试验研究

针对老柞山金矿矿体形态复杂,下盘矿体膨胀的开采技术条件,提出并试验了复合电耙道浅孔留矿采矿法．获得了显著的经济效益和社会效益,对类似矿山具有推广应用价值。     

基于复合材料理论的土壤——根系力学研究

从微观的角度研究了根系——土壤复合体的宏观力学性质,并通过计算机模拟试验,研究了土壤和根系——土壤复合体的应变。结果表明,生态防护对加固土壤、保护边坡体有可支持的力学依据,能够有效的提高土壤的力学性质。     

Sn及其氧化物超微粉的制备与测试

本文采用气体蒸发法制备出粒度不到５ｎｍ的Ｓｎ及其氧化物的超微粉。利用热重，差热分析和Ｘ射线衍射谱等测试方法研究了热处理制度对其粒度，成份和气敏特性的影响，发现了ＳｎＯ_２正交相的存在。     

C/C复合材料表面硬度对抗氧化性能的影响EI北大核心CSCD

C/C复合材料使用后由于氧化表面硬度有不同程度的下降。经再次防氧化处理后,测试了表面硬度及抗氧化性能。结果表明:氧化后C/C复合材料试样的表面肖氏硬度为HS70时,再次防氧化处理后,其表面硬度增至HS80,在700℃恒温静态氧化条件下,氧化失重率分别为0.44%/15h,1.2%/22h,其抗氧化性能最强。表面硬度为HS40的C/C复合材料试样,距表层1mm深度范围内其硬度均低于基底,再次防氧化处理后其硬度值从HS40增至HS60,其700℃抗氧化性能最差,氧化失重率分别为3.93%/15h,6.52%/22h。     

钨铜化合物氢还原制备钨铜复合粉研究

通过对钨铜化合物氢还原过程进行热力学分析,找到了制备均匀细颗粒钨铜复合粉的热力学途径--彻底快速除去还原系统中的水分.设计了封闭还原系统,用此系统进行氢气热还原,不仅使氢气得到充分利用,而且容易判断反应终点.通过系统内的特殊装置除水,降低了还原温度,在600℃下还原得到了混合均匀的钨铜复合粉.系统能彻底快速除去反应生成的水分,使反应物的湿度大大降低,确保得到细颗粒的钨铜复合粉,其平均粒径小于80nm.     

Biomimetic Robust Starch Composite Films with Super-Hydrophobicity and Vivid Structural Colors

The starch composite films (SCFs) will be one of the best alternative packaging materials to petroleum based plastic films, which mitigates white pollution and energy consumption. However, weak mechanical stability, water resistance, and dyeability has hindered the application of SCFs. Herein, a bioinspired robust SCFs with super-hydrophobicity and excellent structural colors were prepared by fiber-reinforcement and assembling SiO₂/Polydimethylsiloxane (PDMS) amorphous arrays on the surface of SCFs. The properties of the designed SCFs were investigated by various methods including scanning electron microscope (SEM), Fourier transform infrared spectroscopy (FT-IR), X-ray diffraction (XRD), thermo-gravimetric analysis (TGA), a tensile test, contact angle (CA) test, and an optical test. The results showed that the obtained SCFs possessed a higher tensile strength (55.17 MPa) attributed to the formed abundant hydrogen bonds between the molecular chains of the starch, cellulose fiber, and polyvinyl alcohol. Benefiting from the nanostructure with rough surface which were modified by materials with low surface free energy, the contact angle and sliding angle of the film reached up to 154° and 2°, respectively. The colors which were produced by the constructive interference of the coherent scattered light could cover all of the visible regions by tuning the diameters of the SiO₂ nanoparticles. The strategy in the present study not only reinforces the mechanical strength and water resistance of SCFs but also provides an environmentally friendly way to color the them, which shows unprecedented application potential in packaging materials of the starch composite films.     

用磁控溅射法制备的Ag-MgF2的复合薄膜的研究

采用RF磁控溅射方法制备了Ag-MgF2复合薄膜.通过XRD测量,发现当退火温度在300～500℃时,Ag以晶态形式镶嵌在非晶态介质中;当退火温度低于300℃时候,Ag以非晶态形式存在.在分层镀Ag和MgF2薄膜后,经过热处理使Ag颗粒扩散在MgF2介质中,通过AFM观察,对复合薄膜形貌进行了分析:如果先镀MgF2薄膜,再镀Ag薄膜,发现Ag颗粒主要分布在薄膜的表面,并且富集形成较大的颗粒,表现出块体Ag的吸收特性.而先镀Ag薄膜,然后再镀MgF2薄膜,经过热处理,可以形成Ag颗粒均匀镶嵌在介质中形成的复合薄膜.同时对样品的吸收特性也进行了研究.     

P(MMA-AN)/TiO2复合粒子的制备及光催化性能

采用原位乳液聚合方法制备了基于共价键结合的P(MMA-AN)/TiO2复合粒子,红外光谱和热失重分析结果表明P(MMA-AN)在TiO2表面接枝率为15.9%。以甲基橙溶液为目标污染物,研究了P(MMA-AN)/TiO2复合粒子和TiO2对甲基橙的吸附和光催化降解甲基橙溶液的性能,结果表明:两种粒子对甲基橙的吸附都很少;在相同时间内,P(MMA-AN)/TiO2复合粒子对甲基橙溶液的降解性能优于TiO2,紫外光照180 min后,P(MMA-AN)/TiO2复合粒子对甲基橙溶液的降解率达到了88%,而TiO2仅为74%。     

纸塑铝复合包装材料各组分共热解产物分析

以甲酸分离枕型利乐包所得的纸、聚乙烯、铝作为实验材料,使用热重红外联用(TG-FTIR)分析技术,研究了单一组分热解产物特性和组分共热解机理。结果表明:共热解时纸和聚乙烯之间存在协同作用,且在TG-FTIR失重峰位置附近产生的影响尤为明显;铝在共热解时具有催化剂的作用,会促进聚乙烯的分解。为实现废弃纸塑铝复合包装材料的资源化利用提供科学参考和实验依据。