用粉体表面改性技术制备拒水粉

拒水粉是一种新型建筑防水材料，被称之为神奇的粉末。本文就如何利用粉体表面改性技术制备拒水粉，从理论上和具体的实验方法上作了详尽的说明。     

多面体含能材料的爆速和爆压预估

当采用R-P经验方法预估多硝基笼状化合物最大理论密度下爆速和爆压时,需要修正F因子中与分子结构有关的A/3项,使F因子包含有来自笼状分子高晶体密度和分子内部高张力能的贡献。与K-J方法相比,改进R-P方法既保持了原式的优点,又使预估结果获得明显改善。把K-J方法预估结果作为基础数据,利用改进R-P方法估算25种多硝基笼状化合物的爆速和爆压,结果表明该方法的相对误差分别为±1.9％和±5.2％。而用R-P方法时,预估爆速和爆压的相对误差分别为±14.0％和±21.4％。     

Synthesis of poly(4-methylstyrene)- graft-poly(ethylene oxide)s and application as polymeric dispersant in coal-water mixture

Poly(4-methylstyrene)-graft-poly(ethylene oxide)s were prepared via polymerisation of ethylene oxide on to poly(4-methylstyrene)s functionalised with hydroxyl groups. In this way, many ‘comb-like’ polymers having different hydrophobic backbone length, hydrophilic branch length and frequency of branches were synthesised. These polymers were tested as dispersants in coal-water mixtures in order to correlate the dispersing properties of this class of polymers with the investigated parameters.     

贵定露天石灰石矿不稳定边坡的治理

着重讨论了贵定石灰石矿边坡１２２０～１１８０ｍ水平在Ｉ号剖面左右深层不稳定地段的边坡治理方案。推荐方案强调多台阶同时回采，以推迟靠帮，进而推迟可能的表层滑坡治理。还讨论了护坡矿壁回收及该矿其他不稳定地段边坡治理等问题。     

APPLICATION OF A COMMERCIAL ENZYME PREPARATION IN THE BARLEY MALTING PROCESS

This paper presents data on barley micromalting with addition of the CELLUCLAST enzyme complex. This is a commercial, multicarbohydrase with distinct β-glucanase and proteinase activities. The enzyme was added to steeping and germination phases, in different quantities (0.05%; 0.75% and 0.1% of initial barley). The enzyme was added to different malting phases: to the 2nd and 3rd steep water, at the beginning of germination on the 1st day by spraying, on the 2nd day of germination and in combination of addition to 3rd steeping water and in germination start (50% of total quantity of each). CELLUCLAST enzyme had a significant effect on reduction of wort viscosity, extract difference, wort filterability and protein breakdown, depending on the quantity of added enzyme and the malting phase to which it was added. There was no negative effect on other malt quality parameters. The best values of cytolytic breakdown parameters (viscosity, extract difference, filtration rate) were obtained with addition of 0.075% of CELLUCLAST, on the first day of germination.     

蒙脱土-有机硅复合改性硅烷化聚氨酯密封胶

采用2,4-甲苯二异氰酸酯、聚醚多元醇、蒙脱土、有机硅(α,ω-二羟基聚二甲基硅氧烷)和硅烷偶联剂为原料,制备了有机蒙脱土/聚醚多元醇复合物(OMMT/330N)-有机硅复合改性的硅烷化聚氨酯(SPU)密封胶。通过广角X射线衍射、透射电子显微镜和傅里叶变换红外光谱手段表征了蒙脱土在复合材料中的分散情况,表征结果显示,有机蒙脱土以平均层间距不小于4.12nm的宽分布分散在SPU基体中。同时对密封胶的力学性能进行测试,测试结果表明,经OMMT/330N-有机硅复合改性的SPU密封胶具有性能互补效果,当添加质量分数为5%(基于330N)的OMMT和8%的有机硅时,复合改性的SPU密封胶的拉伸强度和断裂伸长率比纯SPU密封胶提高了65.8%和71.6%。     

超细分子筛材料的合成与应用研究进展

综述了近几年超细分子筛的合成与应用方面的研究进展,重点介绍了几种常用且研究较多的分子筛,主要包括Y,ZSM-5,β,Silicalite-1,ZSM-35,MCM-22等分子筛。对超细分子筛的合成方法及其在石化、环保和生物等领域的应用进行了介绍,并对分子筛复合材料的研究及应用的最新动态进行了评述,说明超细分子筛材料的应用领域仍在不断拓宽,超细分子筛复合材料的研究将会成为分子筛材料领域未来的重要发展方向。     

Partial or total silylation of dextran with hexamethyldisilazane

The silylation reaction of dextran with 1,1,1,3,3,3-hexamethyldisilazane (HMDS) in DMSO was studied as the first step of the synthesis of new amphiphilic polyester-grafted dextrans. According to the experimental conditions, i.e. dextran molar weight, medium temperature and reaction time, HMDS/OH ratio, addition of a catalyst and co-solvent, partially or totally silylated dextrans were recovered. The highest silylation yields were obtained with the lowest molecular weight dextrans. The increase in temperature medium and/or reaction time, the presence of catalyst or co-solvent favored the protection yield. Whatever the dextran used, complete silylation of the polysaccharide chain could be achieved by adequate selection of the experimental conditions. The thermal properties of resulting silylated polysaccharides were investigated by temperature modulated DSC. It was observed that T_g values of partially silylated dextran were maintained between 120 and 140 °C, independently of the dextran molecular weight. Interestingly, DMSO proved to behave as an efficient plasticizer of (partially) silylated dextrans. The partially silylated dextrans were efficiently used as multifunctional macroinitiators for the controlled ring-opening polymerization (ROP) of lactone. The ROP was then promoted from the remaining hydroxyl groups in the presence of tin or aluminium activator. After polymerization and ultimate deprotection of the silylated dextran backbone, amphiphilic polyester-grafted dextrans were readily recovered.     

催化重整装置的几点设计改进

以一套500kt/a规模的催化重整装置的设计为例进行分析和讨论，提出对今后催化重整装置设计的几点改进建议，包括原料的加氢预处理流程，提纯重整产氢，优化预分馏塔及稳定塔的塔盘层数，选择合适的预加氢进料换热器及甲苯塔、二甲苯塔的加压操作等。     

球墨铸铁材料对激光的吸收率

球墨铸铁因其优良性能而被广泛用作模具材料。对球墨铸铁冲压模具的激光表面处理已成为改善其耐磨性、提高使用寿命的重要方法。一定激光参量下吸收率的大小又直接影响到表面处理的质量。因此,确定球墨铸铁材料对激光的吸收率十分必要。通过热电偶测温,计算机数据采集系统进行定点温度采集,并结合数值模拟方法,对吸收率进行了标定,即首先根据预置的吸收率计算,预测被测点处的温度响应,并与实测响应比较,不断修正吸收率值,使预测温度响应和实验值吻合,由此获得吸收率。采用这种方法获得了球墨铸铁材料在大气条件下对激光的吸收率为23.3%。为激光处理球墨铸铁材料时工艺参量的选择和优化提供了一定参考。