高浓度钢渣粉尘环境发动机空气过滤系统的改进与维护

针对液压挖掘机在高浓度钢渣粉尘作业环境下,钢渣粉尘对发动机的损害,分析了发动机空气滤清器的作用,阐述了传统空气过滤系统存在的问题,提出了改进的方案与维护措施.     

Microstructure evolution of nanostructured Ni3Al during annealing

A nanocrystalline layer was produced on the surface of Ni3Al intermetallic by means of surface mechanical attrition treatment. The surface nanocrystallites were annealed at 250-750 ℃ for 30 min. Microstructure evolution of nanocrystallites during annealing was studied by X-ray diffraction （XRD） and transmission electronic microscope （TEM）. The experimental results show that long-rang order recovers rapidly when annealing temperature is below 250℃ and changes slowly at 350-550 ℃, and then it increases rapidly at 750℃. The grain size of nanocrystallites of Ni3Al keeps stable and crystal defects recover when they are annealed below 550℃. The grains grow normally in low temperature annealing and abnormal growth occurs at 750℃.     

溶胶－凝胶二氧化硅驻极体薄膜的物理化学改性

实验研究了由溶胶－凝胶法制备二氧化硅驻极体薄膜的工艺。用红外透射谱、扫描电子显微镜以及驻极体等温表面电位测量和热刺激放电等实验考察了热处理和化学表面修正两个关键工艺对溶胶－凝胶二氧化硅样品驻极体性能的影响。结果表明经过高温条件下一定时间的热处理和化学表面修正，可以制备出性能优良的驻极体薄膜     

颗粒增强TiAl基复合材料及其Si的韧化作用研究EI

运用ＸＤ工艺制备了颗粒增强ＴｉＡｌ基复合材料。增强颗粒均匀分布于ＴｉＡｌ基体中并细化ＴｉＡｌ合金。通过在ＴｉＢ_２／ＴｉＡｌ、ＴｉＣ／ＴｉＡｌ复合材料中加入适量的Ｓｉ，颗粒增强ＴｉＡｌ基复合材料的室温延性得到了改善。     

武钢含铁化合物二次资源综合利用的有效途径

在分析武钢含铁化合物二资资源的种类、数量和理化特性的基础上,提出了这部分资源的产品开发方向,并根据这些开发产品国内外市场的分析,指出这种开发将可能取得可观的经济效益。简介了这类开发的工艺和设备。     

《中华人民共和国煤炭法》亟待修订

当前,由于《煤炭法》颁布的时代背景发生很大变化,该法已经不能适应形势发展和实际工作的需要。该法存在的主要问题包括煤炭开采市场准入门槛设置过低、对煤炭生产开发规划规定过分原则等。我们应以科学发展观为指导,按照市场经济规律的要求,针对存在的问题尽快对《煤炭法》进行修订和完善。     

球状碳单质分子的发现,研究现状及应用前景

综述了碳的第三种同素异形体──球状碳单质分子的发现、结构、性质及其应用前景。     

EVALUATION OF BARLEY AND MALT QUALITY USING NEAR-INFRARED REFLECTANCE TECHNIQUES

A scanning near-infrared reflectance spectrophotometer was calibrated for the prediction of barley aleurone colour and malt moisture. The malt moisture was predicted on malt ground for the determination of malt extract (coarse grind) making the method suitable for moisture correction in malt extract estimation. Calibrations for the prediction of malt extract and endosperm modification from barley and malt were also attempted. A correlation (r= 0.851 n = 135) was found between malt hot water extract and the percentage of the endosperm estimated as being modified by microscopy following staining with Calcofluor. Probably because of this influence of modification on malt extract, the use of near-infrared reflectance to predict malt extract was most successful at predicting the malt extract values obtained following micro-malting in the absence of the additives, gibberellic acid and potassium bromate.     

稀土和磷复合变质对过共晶铝——硅合金硅晶体形貌与力学性能的影响

采用扫描电镜、Ｘ射线衍射、材料性能检测等实验手段对复合变质处理后的过共晶铝硅合金显微组织、形貌和力学性能进行了分析。结果表明：磷和稀土复合变质后，使粗大块状、条状的初晶硅的尺寸明显缩小且棱角钝化；较大针状的共晶硅变为颗粒状，使显微组织明显细化，从而导致过共晶铝硅合金的力学性能显著提高。     

低温等离子体对天然胶原材料表面改性的研究

采用牛腱中提取的胶原蛋白为原料，制成薄膜试样，在Ｏ２和Ａｒ条件下，用低温等离子体处理天然胶原薄膜的表面．处理后的试样通过电子光谱（ＥＳＣＡ），红外光谱（ＩＲ），Ｘ射线衍射和接触角测量来研究其结构和性能的变化．实验表明：处理后胶原材料的表面、内部结构及化学成分都发生了明显的变化；它与水和二碘甲烷的接触角明显小于等离子处理前的可见低温等离子体方法能用于胶原材料的改性．