Influence of Storage Time and Temperature on Absorption of Flavor Compounds from Solutions by Plastic Packaging Materials

ABSTRACT: Linear low-density polyethylene (LLDPE), oriented polypropylene (OPP), polycarbonate (PC), polyethylene terephthalate (PET film and PET bottle), and polyethylene naphthalate (PEN) were stored in a model solution containing 10 flavor compounds at 4, 20, and 40 °C and flavor absorption by the plastic materials was followed in time. The absorption rate and/or total amount absorbed increased considerably with temperature from 4 to 40 °C. Depending on storage temperature, total flavor absorption by the polyolefins (LLDPE and OPP) was 3 to 2400 times higher than by the polyesters (PC, PET, and PEN). Therefore, in the factor of flavor absorption, polyesters are preferred over polyolefins as packaging material.     

非化学计量LaNi5型储氢合金的性能

采用富La混合稀土与Ni、Co、Mg等元素组合，获得了一种非化学计量LaNi5型储氢合金、用金相、XRD和SEM-EDX等方法分析了该合金的组织结构，研究了合金的气相储氢特性以及电化学性能，结果表明：在1.6MPa氢压和温度29℃下，该合金的储氢量达到1.58%（质量分数），该合金的放电容量为380mAh/g。经300次循环后容量保持率为55%，该合金的基体是CaCu5型结构的LaNi5相，但有第二相（LaMg)Ni3析出，这种第二相的形成是导致该合金大容量的关键。     

Continuous formation of slurry ice by cooling water–oil emulsion in a tube

Water-silicone oil emulsion with an additive, (C₂H₅O)₃SiC₃H₆NH₂, was examined as a heat storage material. A spiral tube used as a heat exchanger was immersed in a low temperature bath and the emulsion was circulated in the tube to make ice continuously. Ice was separated from the ice–liquid suspension in an outlet tank. The amount of formed ice, the temperatures of the inlet and the outlet of the heat exchanger, and the temperatures in the tube wall were measured and the overall heat transfer coefficient and the heat flux through the tube were calculated. Experiments were carried out, varying the flow rate, the temperature of cooling brine, and the thickness of tube wall. The condition under which slurry ice was formed continuously without adhesion of ice to the cooling wall was clarified. Though decrease in the thermal resistance of the tube increased the rate of ice formation or raised the brine temperature, it narrowed the range of the flow rate and of the brine temperature in which slurry ice was formed continuously.     

车用乙醇汽油调合及储运问题的探讨

简要介绍了车用乙醇汽油的组成、性质 ,阐述了车用乙醇汽油调合及储运设施的工艺设计思想 ,以及车用乙醇汽油储运设施设计中应注意的问题。     

固液相变蓄能的数学模型和自然对流换热系数的实验研究

引入自然对流换热系数 ,将固液蓄能数学模型简化为仅用能量方程加以描述。并通过实验测得相变过程的实际温度场 ,证明了自然对流固液相变换热的影响不可忽略 ,验证了固液相变界面移动速率随自然对流换热系数的增大而增大的定性关系     

大型钢制立式储罐的导链式倒装法施工

介绍了导链式倒装法安装大型钢制立式储罐的原理及制作工艺流程。     

Efficient Management of Persistent Knowledge

Although computer speed has steadily increased and memory is getting cheaper, the need for storage managers to deal efficiently with applications that cannot be held into main memory is vital. Dealing with large quantities of clauses implies the use of persistent knowledge and thus, indexing methods are essential to access efficiently the subset of clauses relevant to answering a query. We introduce PerKMan, a storage manager that uses G-trees, and aims at efficient manipulation of large amounts of persistent knowledge. PerKMan may be connected to Prolog systems that offer an external C language interface. As well as the fact that the storage manager allows different arguments of a predicate to share a common index dimension in a novel manner, it indexes rules and facts in the same manner. PerKMan handles compound terms efficiently and its data structures adapt their shape to large dynamic volumes of clauses, no matter what the distribution. The storage manager achieves fast clause retrieval and reasonable use of disk space.     

滩海油罐CAD/CAG

根据滩海油田地区环境条件的特殊性,认为取50年一遇的3秒钟瞬时风速作为计算依据更切合实际,给出了相应的抗风设计方法和设计公式,根据最新储油罐抗震理论编制了验算程序.将计算机辅助设计与辅助绘图集成一体,形成了一套完整的储油罐CAD/CAG系统.该系统省去了过去人工计算需要查取数据的麻烦,可以自动检索,并完成各项分析计算和全套施工图的绘制工作.速度快、准确性高,直接输出透明图,整洁规范.该系统正用于实际设计生产.     

Baseline assessment of metals and hydrocarbons in the sediments of Lake Mulwala, Australia

An assessment of hydrocarbon and metal/metalloids (arsenic, cadmium, copper, lead, mercury, selenium, zinc) contamination in sediments from Lake Mulwala, Australia, was undertaken. The objectives of the study were: (i) to determine the extent of contamination in the lake sediments, compared to Australian and international sediment quality guidelines, and (ii) to attempt to identify the contaminant sources to the lake. With the exception of a few samples containing elevated levels of arsenic and/or mercury, the levels of all contaminants in the sediment samples taken from the lake were below the ‘lower trigger’ of the Australian Sediment Quality Guidelines that would warrant further investigation. High molecular weight hydrocarbons (up to 700 mg kg⁻¹) were found in most sediment samples. Non‐metric statistical analysis indicated that the contaminant distribution was different in different parts of the lake, with the lowest concentrations generally found at the influent to the lake. No definitive source(s) of contamination could be identified for either metalloids or hydrocarbons.