根土复合体应力应变特性的试验研究

以香根草根系为研究对象,将根系与土壤视为一整体,探讨在不同含根量下根土复合体抗剪强度指标的变化规律,应用室内三轴试验的方法研究了根土复合体的应力-应变关系及强度特性,并且比较了素土与含根土的强度特性,以及它们的变形破坏模式。     

平面盘形凸轮轮廓曲线统一建模的研究

将从动件的直线往复移动和定点往复摆动用虚拟摆动统一表示,采用单参数包络曲线理论建立直动和摆动从动件平面盘形凸轮轮廓的统一数学表达式。根据统一的数学表达式可以开发出一套适合于各类平面盘形凸轮机构的CAD软件包。     

预应力混凝土受弯构件反向变形控制与验算

为解决国内外有关标准和文献对预应力混凝土受弯构件的变形控制不完善的问题,结合工程实践,经过试算,提出了反向变形限值.对预应力混凝土受弯构件反向变形影响因素进行了分析,对采用限制有效压应力来间接控制预应力混凝土受弯构件反向变形的方法进行了探讨.对于预应力混凝土板,以计算跨度、跨高比及控制截面预应力筋的位置为影响因素,计算得到了预应力混凝土板控制截面有效压应力限值.对于预应力混凝土梁,以计算跨度、跨高比及梁的负荷范围为影响因素,分析得到了梁控制截面有效压应力变化规律,并计算得到了预应力混凝土梁控制截面有效压应力限值计算公式.     

一般均质地面承载力现场试验

为了评判施力盘作用下地面的承载安全,进行了一般均质地面承载力静态与动态荷载现场试验.采用平板载荷静态加载方法进行了模拟施力盘静态荷载的平板载荷试验,根据相似准则π定理进行了缩比施力盘动载试验.在现场试验的基础上研究了静载条件下沉降量随时间变化的S-t曲线,不同尺寸承载板在相应载荷作用下的地面土体沉降量之间关联关系的P-S/D曲线及动、静荷载下载荷与沉降量关系的P-S曲线以及动静载荷对比的P-S曲线.分析结果表明:对于进行现场试验的均质地面,S-t曲线表明静态加载方法合理;P-S/D曲线在极限载荷内呈线性比例关系;动载下的沉降量S远远小于静载条件下的沉降量S,动载下的土体变形刚度较静载下的变形刚度高,瞬间动态荷载造成的地面沉降可忽略.     

倾斜疲劳裂纹在混合型应力下张开及滑移特性

对于存在裂纹的机械零件或者构件,它很有可能会受到来自不同方向的作用力, 因此有必要研究裂纹在混合型应力条件下的传播特性. 该文使用具有不同倾斜角度的裂纹--这些裂纹是在应力比R=0的Ⅰ型循环应力下制作的,通过测量裂纹的开口方向和滑移方向的位移量,计算了裂纹端部Ⅰ型应力强度因子(KⅠ)mes和Ⅱ型应力强度因子(KⅡ)mes.裂纹的倾斜角度是指载荷方向与裂纹间的夹角.结果表明,对于存在压缩残余应力的疲劳裂纹,当倾斜角度较大,即β=60°时,应力强度因子的实验值(KⅠ)mes小于理论计算值(KⅠ),但此时实验值(KⅡ)mes与理论值(KⅡ)基本一致.另一方面,对于倾斜角度较小β=45°的疲劳裂纹,其(KⅠ)mes减少的同时,由于裂纹上下表面相互接触,从而导致(KⅡ)mes同时下降.     

The role of charcoal on DTA curves of organo-clay complexes: an overview

DTA of organo-clay complexes supplemented by other thermal analysis methods supplies information on the thermal reactions, properties and stability of the complex, the amount and properties of the adsorbed water in the organo-clay and on the bonding between the organic species and the clay. It is used to identify the mineral to differentiate between various complexes composed of the same clay and the same organic ligand and to establish their composition. During the gradual heating in oxidizing atmospheres the adsorbed organic material is oxidized, giving rise to significant exothermic peaks. DTA curves of organo-clays are divided into three regions: (1) the dehydration of the clay, (2) the thermal oxidation of the organic material and (3) the dehydroxylation of the clay. The exothermic oxidation reaction occurring during the gradual heating of the sample takes place in two steps, in the range 200–500 °C, oxidation of organic hydrogen and formation of water and charcoal, and 400–750 °C, oxidation of charcoal and formation of CO₂. The exothermic peak temperatures depend on the mineral and on the organic compound and on the types of bonding between these two components of the organo-clay complex. The present communication concentrates in the role of the combustion of charcoal in the study of the fine structure of the complex and of the type of associations between the organic compound and the clay.     

Understanding of the tensile deformation in HDPE/LDPE blends based on their crystal structure and phase morphology

The mechanisms of tensile deformation in high density polyethylene/low density polyethylene (HDPE/LDPE) blends were studied by a video-controlled tensile set-up, combined with dynamic mechanical analysis and small angle X-ray scattering. When quenching from the melt to room temperature, HDPE forms well-organized spherulits with high crystallinity and rigid amorphous layers between lamellae, and LDPE forms irregular aggregates with low crystallinity and mobile amorphous layers between lamellae. A separate lamellar stack-like structure is formed in HDPE/LDPE blends during the quenching. The deformation is affected by both the crystal structure and the phase morphology. Because the semi-crystalline polymers are made up of two interpenetrating networks, one is built up by the entangled fluid part and the other by the crystallites, at low deformations the coupling and coarse slips of the crystalline blocks dominate the mechanical properties, which allows the system to maintain a homogeneous strain distribution in the sample. The assumption of a homogeneous strain distribution can now be further proved by the tensile deformation in HDPE/LDPE blends, which shows two-step processes, with HDPE crystallites being broken down first at imposed strain of 0.4 and then LDPE crystallites being broken later, at an imposed strain of 0.6.     

The Mechanical Behaviour of Polyimide/Copper Laminates Part 2: Peel Energy Measurements

The mechanical peel behaviour of laminates consisting of polyimide films adhered to copper foil using a modified acrylic adhesive has been studied over a wide range of test rates and temperatures. The laminates were prepared from polyimide films which had been subjected to either a “high-thermal history” or a “low-thermal history” treatment during the production of the film. The measured peel energies of the laminates could be superimposed to give a master curve of peel energy versus the reduced rate of peel test, Ra_T, where R is the rate of peel test and a_T is the time-temperature shift factor. The appropriate shift factors were a function of the test temperature and were mainly deduced from tensile tests conducted on the bulk adhesive. The “high-thermal history” laminates gave higher peel energies and the locus of failure of the laminates was mainly by cohesive fracture through the adhesive layer. At low values of log₁₀ Ra_T, i.e. Low rates of peel and high test temperatures, the “low-thermal history” laminates also failed in the adhesive layer and possessed similar peel energies to those measured for the “high-thermal history” laminates. However, at high log₁₀ Ra_T values, the peel energies measured for the “low-thermal history” laminates were lower and showed a wider scatter. These arose from a different locus of failure occurring in these “low-thermal history” laminates when tested under these conditions. Namely, it was found that most of these laminates failed in a weak boundary layer in the outer regions of the “low-thermal history” polyimide film.     

基于压缩感知的SAR图像鲁棒编码传输

目的 尽管传统的联合信源信道编码方案可以获得高效的压缩性能,但当信道恶化超过信道编码的纠错能力时会导致解码端重构性能的急剧下降;为此利用压缩感知的民主性提出一种鲁棒的SAR图像编码传输方案,且采用了一系列方法提高该方案的率失真性能。方法 考虑到SAR图像丰富的边缘信息,采用具有更强方向表示能力的方向提升小波变换(DLWT)对SAR图像进行稀疏表示,且为消除压缩感知中恢复非稀疏信号时存在的混叠效应,采用了稀疏滤波方法保证大系数的精确恢复,在解码端采用了高效的Bayesian重建算法获得图像的高性能重建。结果 在同等码率下,与传统的联合信源信道编码方案CCSDS-RS相比,本文方案可以实现更加鲁棒的编码传输,当丢包率达到0.05时,本文方案DSFB-CS获得的重建性能明显要高于CCSDS-RS;与基于Bayesian重建算法TSW-CS的传统方案相比,本文方案可提高峰值信噪比(PSNR)3.9 dB。结论 本文方案DSFB-CS 实现了SAR图像的鲁棒传输,随着丢包率的上升,DSFB-CS获得的重建性能缓慢下降,保证了面对不稳定信道时,解码端可以获得相对稳定的重构图像。     

Implementing optimized pairings with elliptic nets

In this paper,we use elliptic nets to implement the optimized Ate pairings and optimal pairings on the Barreto-Naehrig curves with embedding degree 12.In order to do the arithmetic of elliptic curves over finite fields with elliptic nets,we first give some basic properties of elliptic nets associated to elliptic curves over finite fields and the expression of Miller function in terms of elliptic nets.Then we give formulae to compute some optimized pairings with elliptic nets,which is a new method to implement pairings.This method with elliptic nets has time complexity comparable to Miller’s algorithm and it can be optimized.