工程结构优化设计发展综述

 着重评述了工程结构优化设计研究领域从最初的尺寸优化发展到形状优化、拓扑优化的基本历程及其相关特点，并对优化设计选用的优化算法进行了归类，提出了这一领域今后仍然有待于发展的主要方面．     

On the improvement of detection characteristics of trans-stilbene crystals by improving crystal perfection

Organic molecular scintillating crystals are noted for their good timing and particle discrimination process. Trans-stilbene is one such candidate noted for its good particle detection characteristics for the past five decades. Progressive strengthening of detection characteristics of trans-stilbene has been attempted by improving crystal perfection. A series of timing resolution studies have been carried out for the Bridgman grown trans-stilbene crystals under different experimental conditions. The results were compared with the previously reported values. Pulse shape discrimination process has been carried out for ²⁴¹Am and ²⁵²Cf sources and good discrimination has been obtained for gamma-alpha and gamma-neutron sources from the grown organic phosphor crystal. Electronic Publication     

精密陶瓷部件近净成型技术的发展

重点介绍了近十年发展起来的陶瓷部件的近净成型技术 ,主要包括直接凝固注模成型、凝胶注模成型、陶瓷注射成型、陶瓷无模成型和微注入成型。对这些新的成型方法的原理、工艺过程及应用特点进行了较全面的分析与比较。     

浓缩大豆磷脂制取工艺及设备的研究

对水化油脚采用新工艺和新设备制取浓缩大豆磷脂，并对制取浓缩大豆磷脂的影响因素进行分析和优化，得到了制取浓缩大豆磷脂新工艺和最佳工艺参数。     

Combined shape and sizing optimization of truss structures

 In this paper, an evolutionary optimization method is presented for weight minimum problem of a 3-dimensional truss structure in terms of nodal coordinates and element cross-sectional areas. The structure is subject to stress, local buckling and displacement constraints. Two types of design variables with different natures are optimized separately: (1) a fully stressed design (FSD) and scaling techniques are applied to sizing variables and (2) the evolutionary node shift method is applied to shape variables. Alternating procedure is utilized to couple the two types of variables and to combine the results. The optimum solution is achieved gradually from the initial configuration design. Two typical truss structures are examined to illustrate the validity of the method. Received: 22 October 2001 / Accepted: 04 June 2002 This research work is supported by the National Natural Science Foundation of China under the guarantees no. 10072050 and 10172072, respectively.     

铁基形状记忆合金0Cr12Ni6Mn16Si5的研制

探讨了0Cr12Ni6Mn16Si5形状记忆合金的工业化生产工艺,0Cr12Ni6Mn16Si5可以采用EF1+AOD+EF2进行冶炼.合金具有强的热敏感性和高温变形抗力,高温可加工热塑性温度区间比较窄,温度超过1*!100℃,塑性直线下降.铸锭的开锻温度为1*!080℃,终锻温度为900℃;锻造管坯只有采用挤压方法实施管材成型.挤压成型的毛管可以采用冷轧与冷拔相接合方法进一步加工成薄壁管.     

Spray forming technology for military applications

Over the past five years, the Annapolis Detachment, Carderock Division, Naval Surface Warfare Center (formerly David Taylor Research Center) has established a state- of- the- art spray forming facility for the study and exploitation of this near net shape manufacturing process. Spray forming is a single step gas atomization/deposition process which yields ferrous and nonferrous, near final shape, near fully dense preforms that has proven to be a viable and cost effective alternative to conventional metalworking technology for the production of material preforms with properties surpassing those of their cast and wrought counterparts. Current programs at Carderock Divison Naval Surface Warfare Center are aimed at optimization of the process, certification of the spray formed products and industrialization of the technology.     

形状记忆合金薄膜的研究与发展

形状记忆合金是智能结构研究中重点开发的传感和驱元件材料之一。然而ＳＭＡ体材料响应速度较慢，在一五程度上限制了它的应用。ＳＭＡ薄膜弥补了这一缺陷，且更易于智能能结构集成化。本文介绍了国内外关于ＳＭＡ薄膜研究的现状。并展望了未来发展。     

Physiological deterioration of cassava roots

Rapid post-harvest physiological deterioration of cassava roots (Manihot esculenta Crantz) appears to be due essentially to wound responses, comparable to those observed in other plant storage organs. The wound responses observed include: increased activity of phenylalanine ammonia lyase, an enzyme associated with phenol biosynthesis; increased activity of peroxidase and polyphenol oxidase; formation of phenols/polyphenols including leucoanthocyanidins, catechins, sco-poletin and condensed tannins, and often the formation of a wound periderm. In cassava, the responses did not remain localised at wound surfaces in roots when held at low storage humidity but spread through the roots causing a discolouration of the vascular tissue and storage parenchyma. Roots stored at high humidity showed a more typical wound response with localised production of phenols and periderm formation.     

A new method of characterization for stratified thermal energy stores

A new method for characterization of stratified thermal energy stores (TES) that integrates both the first law and the second law concerns is presented here. The first law concern is incorporated into a quantity called energy response factor and the second law concern into an entropy generation ratio. A product of these two quantities is at the heart of the TES efficiency definitions. This approach removes the overemphasis of the existing methods either on the first or the second law of thermodynamics which often biases the characterization results. The information about the evolution of the temperature field of the system in time is the prerequisite of the new method. It may be obtained from experiments or from suitable numerical simulations. The current method can be easily integrated into computational fluid dynamic (CFD) simulations and thus facilitate CFD-based design analysis. As an example of such CFD-integrated analysis, a large-scale hot water seasonal heat store is numerically studied to identify the effects of aspect ratio, containment shape, internal structures, and containment size on their efficiency. The results suggest the effectiveness of the new method in deriving useful design insights.