Side-chain functionalized liquid crystalline polymers and blends, 10: phase behavior and structure of side-chain liquid crystalline ionomers containing ions of d-metals

Novel side-chain liquid crystalline (LC) ionomers containing d-metals Co(II) and Ni(II) were synthesized and characterized. Both families of the ionomers are characterized by the same influence of charged group content in polymer on their phase behavior. The incorporation of 2-3 mol% of metal ions in the nematic polymer matrix leads to the induction of SmA phase and rise in the clearing point. The peculiarity of their phase behavior in comparison with the earlier investigated LC ionomers with alkaline or alkali-earth metals is the full destruction of the mesophase at the concentration of d-metal higher than 12 mol%. This phenomenon was associated with the well-known ability of the transition metal ions to form various complexes that, in the case of LC ionomers, can negatively influence the ordering of the side mesogenic groups. The proposed structure of the LC ionomers is discussed in comparison with the metallomesogenic polymer systems.     

Formation of Polymeric Lewis Acid–Lewis Base Complexes with Well-defined Organoboron Polymers

The binding of Lewis bases to organoboron polymeric Lewis acids has been studied and the parameters that determine the complexation equilibrium have been investigated, which include (i) the strength of the individual Lewis acids and Lewis bases, (ii) concentration, and (iii) temperature. While the strongly Lewis acidic borane polymers poly(4-bis(pentafluorophenyl)borylstyrene) (PS-BPf) and poly(4-(di-2-thienylboryl)styrene) (PS-BTh) form isolable complexes with strong Lewis bases such as 4-t-butylpyridine (^tPy), a temperature dependent equilibrium is established with weaker bases such as THF. Similarly, the weakly Lewis acidic boronate polymer poly(4-diethoxyborylstyrene) (PS-BOEt) undergoes a temperature dependent equilibrium with the strong Lewis base 4-dimethylaminopyridine (DMAP), while poly(4-pinacolatoborylstyrene) (PS-BPin) does not significantly bind to pyridine bases. Decomplexation of PS-BTh· ^t Py is achieved by treatment with the stronger Lewis acid, B(C₆F₅)₃, thereby confirming the reversible nature of the polymeric Lewis acid–base adducts. This paper is dedicated to Professor Ian Manners in gratitude of his guidance throughout the years and recognition of his scientific accomplishments     

Monodisperse polymer/metal composite particles by electroless chemical deposition: Effect of surface functionality of polymer particles

Micron‐sized polymer particles were coated with layers of nickel compounds by plating electrolessly in the presence of aqueous solutions of nickel chloride, sodium hypophosphite, sodium citrate, and ammonium chloride at elevated temperature. The uniform functional polymer particle could be obtained by seeded polymerization. To investigate the effect of surface functionality on the conditions for nickel deposition, the polymer particle was functionalized with the thiol group. From morphological observation, it was found that the mode of nickel deposition was greatly dependent on the surface functionality of the polymer particle. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 87: 420–424, 2003     

Polymer/surfactant interaction—Its relevance to detergent systems

The field of polymer/surfactant interaction is reviewed in this work. Results from two investigative methods,viz., dialysis and surface tension, are discussed, illustrating the main behavioral patterns and outlining the principles of the interactions. Next, aspects of the interaction phenomena that appear to have relevance to detergent formulation are presented. These include solution rheology, solubility control and surface conditioning. Lastly, the importance of surface activity of the polymer itself is stressed, culminating in a discussion of the properties of hydrophobically modified water-soluble polymers (“polymeric surfactants”), both alone and in the presence of conventional surfactants. Based on the Samuel Rosen Memorial Award lecture, given at the AOCS Annual Meeting, Anaheim, CA, April 1993.     

Thermal and crystallization characteristics of poly(ethylene terephthalate) with poly(oxybenzoate‐p‐trimethylene terephthalate) copolymer

Poly(ethylene terephthalate) (PET) was blended with two different poly(oxybenzoate‐p‐trimethylene terephthalate) copolymers, designated T28 and T64, with the level of copolymer varying from 1 to 15 wt %. All samples were prepared by solution blending in a 60/40 (by weight) phenol/tetrachloroethane solvent at 50°C. The crystallization behavior of the samples was studied by DSC. The results indicate that both T28 and T64 accelerated the crystallization rate of PET in a manner similar to that of a nucleating agent. The acceleration of PET crystallization rate was most pronounced in the PET/T64 blends with a maximum level at 5 wt % of T64. The melting temperatures for the blends are comparable to that of pure PET. The observed changes in crystallization behavior are explained by the effect of the physical state of the copolyester during PET crystallization as well as the amount of copolymer in the blends. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 86: 1599–1606, 2002     

Light-sensitive elastomers modified by 4-(N-dimethylmaleimido)-benzenesulphenyl chloride

New light-sensitive polymers were prepared by modification of four different elastomers with 4-(N-dimethylmaleimido)-benzenesulphenyl chloride (DMI-BSCI). Polydienes modified by DMI-BSCI form block copolymers. These polymers show a strong increase of the glass transition temperature T_g whereby the T_g increase of modified poly(octenamer) is much smaller. Higher modified polydienes have two T_g. Modified poly(octenamers) show a melting temperature dependence T_m on the content of trans double bonds which is characteristic of statistical copolymers. The ratio of rate constants with which trans- and cis-structures in poly(octenamer) are occupied by DMI-BSCI, is

$\text{k}{}_{\mathrm{trans}}\text{k}{}_{\mathrm{cis}}\text{= 0.34}$

     

Polymeric dispersions of model azobenzene dyes

New host-guest systems were prepared by using poly(vinyl acetate) and different ethylene-vinyl acetate copolymers as polymeric hosts because of their good compatibility with polar molecules. Two symmetric azobenzene diesters, that is 4,4′-dicarboxyethylazobenzene and 4,4′-di(2-ethylhexyloxycarbonyl)azobenzene were selected as guests. Both solution casting and melt processing were adopted for the preparation of dispersion films that were thoroughly characterized by thermal analysis, UV-vis and FT-IR spectroscopy, and by polarized optical microscopy. The reported results indicate that solution casting afforded heterogeneous dispersions of dye microcrystals at guest concentrations larger than 0.3% whereas homogeneous colored films were obtained at lower dye contents. On the other hand, both melt processing and the presence of branched diester groups favored the dye dispersion within the polymer matrix. At 0.1% dye content, the adopted preparation technique did not appreciably affect the film properties. After 4-8 fold stretching, the host-guest films were analyzed by polarized light spectroscopy. Some of the investigated films displayed interesting polarization efficiency, potentially suited for the preparation of thin film polarizers.     

Shape‐memory polyurethane/multiwalled carbon nanotube fibers

Shape‐memory polyurethane/multiwalled carbon nanotube (SMP–MWNT) composites with various multiwalled carbon nanotube (MWNT) contents were synthesized, and the corresponding SMP–MWNT fibers were prepared by melt spinning. The influence of the MWNT content on the spinnability, fracture morphology, thermal and mechanical properties, and shape‐memory behavior of the shape‐memory polymer was studied. The spinning ability of SMP–MWNTs decreased significantly with increasing MWNT content. When the MWNT content reached 8.0 wt %, the fibers could not be produced because of the poor rheological properties of the composites. The melt‐blending, extrusion, and melt‐spinning processes for the shape‐memory fiber (SMF), particularly at low MWNT contents, caused the nanotubes to distribute homogeneously and preferentially align along the drawing direction of the SMF. The crystallization in the SMF was promoted at low MWNT contents because it acted as a nucleation agent. At high MWNT contents, however, the crystallization was hindered because the movement of the polyurethane chains was restricted. The homogeneously distributed and aligned MWNTs preserved the SMF with high tenacity and initial modulus. The recovery ratio and recovery force were also improved because the MWNTs helped to store the internal elastic energy during stretching and fixing. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci, 2007     

Spectroscopic and electrical properties of 3-alkyl pyrrole-pyrrole copolymers

Three types of copolymers composed of pyrrole and 3-alkyl pyrroles (with alkyl being pentyl, nonyl and undecyl) have been synthesized. A strong linear dependency of the alkyl chain length on the as-prepared copolymer physical properties is demonstrated via (a) DSC (for phase transition temperatures and enthalpy changes) and (b) UV-vis (for wavelengths of the polaronic and bipolaronic electronic transitions, and ratio of the corresponding absorbances). A trend in the copolymers' doping level vs alkyl chain length is also estimated, via IR, by taking the ratio of band intensities of the stretching modes of the polaronic and bipolaronic species. The copolymers are found to be soluble in organic solvents and their solutions can be cast onto glass substrates or metals resulting in thin films, which can be used as the electroactive component of Schottky diodes. The electrical properties of these diodes are also found to be dependent on increasing 3-alkyl chain length.     

Factors influencing magnetic polymer microspheres prepared by dispersion polymerization

Magnetic iron oxide (Fe₃O₄) was prepared by a coprecipitation method. Core–shell composite magnetic polymer microspheres with carboxyl groups were synthesized by the dispersion polymerization of styrene and acrylic acid in the presence of magnetic oxide, and dibenzoyl peroxide was used as an initiator. The synthesized magnetic polymer microspheres were characterized with X‐ray diffraction, transmission electron microscopy, scanning electron microscopy, Fourier transform infrared spectroscopy, and so forth. The results indicated that the product was single‐phase Fe₃O₄, and its average size was about 10 nm. The configuration of the microspheres, which contained carboxyl groups, was spherical, and the average size was about 2 μm. The results of vibrating sample magnetometry tests showed that the magnetic powders produced by different surfactants had different saturation magnetizations. When poly(ethylene glycol) with a weight‐average molecular weight of 4000 was used as a surfactant, the saturation magnetization of the samples reached 69.2 emu/g. The factors that affected the shape, magnetism, size, and distribution of the microspheres were also studied. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 2007