利用CFD获取超声流量计截面速度分布

 通过CFD技术在超声波流量计设计过程中的引入,为流量系数的获取提供了新的途径.通过对特定管道的理论计算表明,采用CFD技术获取的管道内部流型完全可以与试验数据吻合,有助于超声波流量计应用场合流量系数曲线的获取及其精度的保证.     

网络展开图与符号网络分析

采用封闭网络模型,按照电路元件参数,采用开路、短路和着色运算,将电路图逐层分解,得到网络展开图.给出网络展开图的概念和运算规则,指出网络展开图中从根到末稍每个路径的值就是网络行列式展开式中的一个有效项,从而由网络展开图得到符号网络函数.该方法直接对电路图进行运算,不需要建立任何形式的电路方程和行列式,适用于一般的有源电路,而且能生成各种类型的网络函数.     

用NILT导出的传输线瞬态分析模型

K Singhal与J Vlach的NILT(数值Laplace反变换) 技术是端接线性负载传输线分析的一种有效方法.本文利用这一NILT技术,导出了传输线的时域离散模型,由此可进行端接任意负载传输线的瞬态分析.这一模型毋须象通常的频域方法那样对传输线作有理逼近,因而不存在由此带来的数值问题,而计算量与它们相当.文中分别给出了均匀与非均匀传输线的处理,并用实例作了验证.     

武汉市长丰低闸施工期安全监测资料分析

对武汉市长江烂泥湖堤长丰低闸重建施工期间的安全监测资料进行了分析。重点分析了闸过水箱涵的结构缝开合、不均匀沉降等变形监测量变化特征及发展趋势 ,并由此对长丰低闸在施工期的安全状态进行了评判     

前向反冲分析和非卢瑟福背散射

介绍了弹性散射分析中的另外两种分析方法——前向反冲分析和非卢瑟福背散射分析。前向反冲分析适用于材料中H和He同位素分析。高能质子和He离子背散射分析可提高对重基体中C,N和O等轻元素分析的灵敏度。给出了这两种分析方法的应用实例。     

数控机床逐点比较法插补直线分析

通过分析四方向逐点比较法的基本原理及基本特点说明其插补精度比较低的原因,提出提高插补精度的方法——八方向逐点比较插补法。     

SO2转化温度异常情况分析

结合凤山实业总公司硫酸车间 SO2 转化系统的具体工艺流程 ,分析近几年转化系统出现温度不正常的原因 ,提出解决方法     

Failure analysis of aluminum cable steel reinforced (ACSR) conductor of the transmission line crossing the Paraná River

The failure of the conductor of the 460 kV overhead transmission line located along the crossing of the Paraná River was investigated. As a result of this failure, a blackout took place in the southern states of Brazil in January of 2002, reaching approximately 67 million inhabitants. Investigation of the external aluminium layer of the ACSR conductor near the fracture showed typical static deformation marks and dynamic fretting wear tangential marks, both associated with the presence of Al₂O₃ debris. Additionally, encrusted silicon particles were observed on the external surface of the strands. The internal Al layer showed elliptical deformation marks also associated with Al₂O₃ debris. Both Al₂O₃ and Si particles are efficient abrasive material, which associated with slight relative motion of metallic surfaces (clamp/strand and strand/strand) can promote fretting wear. Two types of fracture surface of the Al strands were identified: 45° and quasi-normal surfaces, the former being the predominant type. Delamination and particle detachment were the mechanisms of superficial degradation observed on the Al strands, indicating that the rupture of the strands occurred under a gross slip fretting regime induced by sub-conductor oscillation. Inspection of the internal surface of as-cast Al–10%Si spacer clamps revealed different stages of intense circumferential wear caused by the preferential cracking and particle detachment of the eutectic constituent of the as-cast microstructure. This intense wear reduces the clamping contact pressure, which allows higher displacement amplitude and leads to the critical fretting regime. Finally, a few suggestions are discussed to minimise the occurrence of future failures.     

沥青油毡瓦国内外标准对比分析

从范围、原材料要求、组分要求、物理力学性能等方面对比分析了我国现行油毡瓦标准与欧美标准的区别,提出了我国制订沥青油毡瓦国家标准的的原则。     

Effects of modeling means on properties of monitoring models of spot welding quality

Analyzing and modeling the relation between monitoring information during welding and quality information of the joints is the foundation of monitoring resistance spot welding quality. According to the means of modeling, the known models can be divided into three large categories: single linear regression models, multiple linear regression models and multiple non-linear models. By modeling the relations between dynamic resistance information and welding quality parameters with different means, this paper analyzes effects of modeling means on performances of monitoring models of resistance spot welding quality. From the test results, the following conclusions can be drawn: By comparison with two other kinds of models, artificial neural network (ANN) model can describe non-linear and high coupling relationship between monitoring information and quality information more reasonably, improve performance of monitoring model remarkably, and make the estimated values of welding quality parameters more accurate and reliable.