电子封装用金属基复合材料的制备

分析了电子封装用金属基复合材料的性能特点及其对制备工艺的要求，在此基础上论述了该种材料的各种制备工艺的特点及发展现状。     

Stability of Standard Electrolytic Conductivity Solutions in Glass Containers

The stability of solutions having an electrolytic conductivity, κ, of 5 μS/cm to 100 000 μS/cm packaged in glass screw-cap bottles, glass serum bottles, and glass ampoules was monitored for 1 year to 2 years. The conductivity was determined by measuring the ac resistance of the solution. Mass loss was also monitored for solutions packaged in bottles. The solutions were prepared using KCl in water (κ ≥100 μS/cm) or KCl in 30 % (by mass) n-propanol 70 % (by mass) water (κ ≤ 15 μS/cm). The conductivity changes were compared by packaging type and by nominal κ. The main causes of the κ changes are evaporation (screw-cap bottles) and leaching (screw-cap bottles, serum bottles, and ampoules). Evaporation is determined from mass loss data; leaching occurs from the glass container with no change in mass. The choice of optimal packaging, which depends on the conductivity level, is the packaging in which κ changes the least with time. Ampoules are the most suitable packaging for standards having nominal κ values of 500 μS/cm to 100 000 μS/cm. Screw-cap bottles are most suitable for standards having a nominal κ of 5 μS/cm to 100 μS/cm.     

泄压注浆法在治理小型突水中的运用

七煤集团建设工程公司在施工辽阳铧子石膏矿主、风井井筒时 ,多次采用泄压注浆法成功通过中小型含水层 ,对小型突水进行了有效封堵 ,取得了较好的经济效益     

Fundamentals of stability testing

The principles on which stability tests are based are reviewed. The need to differentiate between product stability and product-container compatibility is emphasized. Recognition of this distinction is fundamental to the efficient organisation and execution of stability tests.
Attention is also drawn to the desirability of having for every product a release specification with which it must comply when manufactured and a broader check specification with which it must comply throughout its shelf-life.
Test methods and the interpretation of the data accrued throughout a test are also discussed.
It is concluded that stability tests should not be conducted in accordance with a standardized routine pattern but that the objectives of each test should be defined and the test designed to achieve those objectives in the most efficient way.
Les regles fondamentales des essais de stabilite     

Automated fluorimetry in quality control of pasteurized and ultra-high temperature-treated starch soup

Automated monitoring of the microbiological quality of heat-processed foods by the resazurin reduction test was applied to microtitration plate incubator-fluorimeter technology. The appearance and disappearance of the fluorescing peak of resorufin was monitored on microtitration trays. Pasteurized or ultra-high temperature-treated starch-based soup was used as the model food system. Bacillus subtilis spores (ultra-high temperature treatment) and vegetative cells of Enterococcus faecalis (pasteurization) were inoculated into the soup before the heat treatment at levels which resulted in some survival. The timing of appearance of maximum fluorescence correlated with the number of bacteria in pre-incubated samples. Automated resazurin-reduction fluorimetry was compared with conventional plating, turbidometry and microcolony count by the direct epifluorescent filter technique. The results of the resazurin test correlated well with those of all the other methods tested. Fluorimetry had the advantage that the results could be read within 1–5h and the reproducibility was superior to the other methods.     

全面留矿法采场顶板支护和落矿爆破工艺的研究

本文介绍的接杆锚杆护顶技术和上向眼大孔距多排微差爆破落矿技术，解决了逐昌金矿全面留矿法采矿工艺中存在的采场顶盘围在面积冒落和采场落矿爆破效果差、效率低这两个问题。     

运用韦柏函数分析发动机燃烧过程时若干问题的探讨

探讨了韦柏函数的内涵及其在实际应用中的若干问题；应用双韦柏函数对涡流室式柴油机的燃烧过程进行分析，加深了对分隔室式发动机燃烧过程的认识．     

小麦、玉米控制灌溉技术研究

198 6～ 1998年 ,在山东省的 3个灌溉试验站 ,对冬小麦、秋玉米进行了控制灌溉试验 ,对农作物的多个生育阶段 ,按高产的要求 ,分别给予适时、适量的灌溉水 ,来控制作物不同生长期的根层土壤含水量 ,从而控制作物不同生长期根系对水分的吸收 ,培植农作物的“丰产群体结构”和与之相适应的“高产理想株型” ,适当降低无效的蒸腾量 ,使农作物能在高产的基础上再增产 .该项控制灌溉技术获得了明显的节水、增产效果 ,灌溉水的生产效率超过了 10kg/m3,产量超过了 8t/hm2 .     

Rapid analysis of polymer homologues and additives with SFE/SFC-MS coupling

A rapid and easy analysis method for polymers is presented. The method involves sample preparation by SFE, separation of the extracted compounds by SFC and simultaneous quantitative detection by FID, as well as identification of unknowns by MS. The applications illustrate how structural research work and routine polymer analysis can be done with this time saving method.     

新型可控电抗器大幅度限制操作过电压功能的研究

通过数值计算和模拟研究,本文叙述了新型可控电抗器的广泛的无功调节功能,揭示了它所具有的大幅度限压的能力,并在理想数学模型的基础上分析了电抗器的限压机理。