Modelling of copper etching in aerated chloride solutions

The effect of dissolved oxygen on the rate of chemical etching of copper by acidic cuprous chloride solution was investigated numerically for the case of a rotating disc electrode (RDE). Copper dissolution in aerated acidic cupric chloride solutions of composition 3.5M CuCl2 + 0.5M HCl + 0.5M KCl and 3.5M CuCl2+0.5M HCl was investigated with consideration of the instantaneous homogeneous reaction 4CuCl32-+4H++O2rlhar4CuCl 3-+2H2O which takes place within the mass transport boundary layer. It was assumed that CuCl32- and O2 react instantaneously, resulting in the formation of a reaction plane which separated the mass transport boundary layer into two regions: a region adjacent to the electrode where oxygen was depleted, and a region adjacent to the bulk where CuCl32- was absent. A one-dimensional mathematical model was developed to predict the position of the reaction plane. The model accounted for diffusion, migration and fluid flow generated by an RDE and included nine species and five heterogeneous electrochemical reactions. The homogeneous redox reaction served to regenerate the chemical etchant solution and thus enhance the etch rate. With increasing oxygen concentration and rotation rate the reaction plane was found to move closer toward the electrode and thus the etch rate of copper increased. Addition of KCl increased the Cl- content in solution so as to shift the reaction plane toward the bulk.     

局部颜色特征与工艺参数融合的铜浮选入矿类型识别

针对铜浮选过程中矿源变化频繁而造成的浮选工况难以识别、生产过程不稳定等问题,在分析铜浮选流程特点的基础上,提出了一种局部颜色特征与关键工艺参数融合的铜浮选入矿类型识别方法.首先采用多元图像处理方法提取泡沫图像局部颜色特征,然后采用混合滤波、时间配准算法将其与关键工艺参数进行数据融合,最后用融合后的混合特征进行模糊聚类,得到隶属度矩阵和聚类中心.工业数据仿真结果验证了本文所提方法的有效性.     

Galvanostatic and microscopic studies of nodulation during copper electrolysis

The galvanostatic technique on a laboratory scale has been shown to be a useful tool in detecting the presence of nodules on the cathode during copper electrodeposition by using the value of the starting electrolytic potential and by the presence of a cathodic polarization peak on the potential–time curve. Studying the morphology of the deposit with a scanning electron microscope at various magnifications confirmed the galvanostatic results. It is postulated that inappropriate concentrations and/or ratios of the additives (thiourea, gelatin and chloride ions) are associated with a certain current density that generates intergranular microcracks due to adsorption of the additives and leads to the formation of nodules at the macroscale.     

添加剂对化学镀铜的影响

研究了亚铁氰化钾和α，α′-联吡啶对陶瓷表面化学镀铜沉积速率、阻抗、镀层晶体结构和外观的影响。加入亚铁氰化钾，铜沉积速率降低，阻抗增大，镀层外观得到改善，镀层晶体呈无序生长；α，α′-联吡啶的加入对铜沉积的抑制更明显，镀层晶体取向为（2，2，0）。     

Synthesis and electrochemical characteristics of Al2O3-coated LiNi1/3Co1/3Mn1/3O2 cathode materials for lithium ion batteries

LiNi_1/3Co_1/3Mn_1/3O₂ cathode materials have been coated with Al₂O₃ nano-particles using sol-gel processing to improve its electrochemical properties. The X-ray diffraction (XRD) pattern of the as-prepared Al₂O₃ nano-particles was indexed to the cubic structure of the γ-Al₂O₃ phase and had an average size of ∼4 nm. The XRD showed that the structure of LiNi_1/3Co_1/3Mn_1/3O₂ was not affected by the Al₂O₃ coating. However, the Al₂O₃ coatings on LiNi_1/3Co_1/3Mn_1/3O₂ improved the cyclic life performance and rate capability without decreasing its initial discharge capacity. These electrochemical properties were also compared with those of LiAlO₂-coated LiNi_1/3Co_1/3Mn_1/3O₂ cathode material. The electrochemical impedance spectroscopy (EIS) was studied to understand the enhanced electrochemical properties of the Al₂O₃-coated LiNi_1/3Co_1/3Mn_1/3O₂ compared to uncoated LiNi_1/3Co_1/3Mn_1/3O₂.     

半导体制冷在测压铜柱高低温校准中的应用

测压铜柱在高低温环境下使用时会带来较大的测压误差,必须进行高低温校准。针对当前测压铜柱高低温静态校准系统中的高低温加载部分使用不便的问题,提出了基于半导体制冷技术对其进行改进。对高低温箱的结构及温度测控系统进行了设计及研制,并进行了温度控制实验,高低温箱可控制在-40~50℃范围内,温度控制精度优于±0.5℃,满足了测压铜柱高低温静态校准的要求。     

尾气脱硫装置在金隆公司的应用

介绍了新型高效尾气脱硫系统的设计及运行情况。该系统能确保尾气二氧化硫排放小于292mg／m^3，钠法和钙法运行时脱硫效率分别达到98％和95％。运行中循环液pH值和脱硫洗涤器喷嘴压力是影响脱硫效率的主要因素。     

Electrodialytic extraction of Cu,Pb and Cl from municipal solid waste incineration fly ash suspended in water

The possibility of using fly ash from municipal solid waste incineration (MSWI) in, for example, concrete is considered. MSWI fly ash, however, has too high a concentration of heavy metals, which may cause leaching problems during use or problems with waste handling at the end of the lifetime of the concrete. The Cl content in MSWI fly ash is also too high and will cause corrosion problems in reinforced concrete. The possibility of removing some of the unwanted heavy metals (Cu and Pb) together with Cl from an MSWI fly ash suspended in water using an electrodialytic separation method was investigated. The removal of Pb and Cu was found to be highly pH dependent and the highest contents removed were 41 and 90%, respectively. The Cu concentration of the ash decreased from 2200 to 860 mg kg^?1 but the Pb concentration increased from 8560 to 16 800 mg kg^?1, showing that Pb is mainly found in the ash fraction that is least soluble. Hence electrodialytic treatment of the ash suspended in water is not a solution to improve the ash quality in terms of Pb. The water‐soluble Cl content per unit weight of the original ash was 12.4%. The removal of water‐soluble Cl was efficient and >98% of Cl was removed (calculated on the basis of mean initial and final concentrations). This result indicates that electrodialytic extraction may be a method that can be used for the removal of Cl from ash prior to its utilization in concrete. Copyright © 2006 Society of Chemical Industry     

密炼机转子铜瓦椭圆的修复方法

简要介绍了一种XHM253/20密闭式炼胶机转子铜瓦椭圆的修复方法.该方法简便易行,修复工期短,修复质量高,在实际工作中具有一定参考价值.     

两种高压直流电源的比较及在铜冶炼烟气制酸装置电除雾器中的应用

论述恒压源与恒流源两种高压直流电源的工作原理和技术特点.对两种电源常见故障的原因进行分析，提出相应的解决方法。介绍两种电源在230kt／a诺兰达炉冶炼烟气和270kt／a转炉冶炼烟气制酸装置的电除雾器中的使用情况.