水性聚氨酯材料配方设计技巧

介绍了优选法的0.618法和分数法,对其进行改进创新和原理证明,并应用于生产涂料配方设计中。     

Mineral nutrition of slash pine in subtropical Australia. II. foliar nutrient response to fertilization

In the previous paper, we reported the stand growth of slash pine (Pinus elliottii) during the first 11.5 years of plantation in response to (1) initial fertilization at plantation establishment with P rates of 11, 22, 45 and 90 kg P ha^–1 which were either banded or broadcast in the presence or absence of basal fertilizers containing 50 kg N ha^–1, 50 kg K ha^–1 and 5 kg Cu ha^–1 and (2) application of additional 40 kg P ha^–1 at age 10 years. Here we present the responses in foliar nutrient concentrations of slash pine in the first 11.5 years to the initial fertilization and the additional P applied at age 10 years.Foliar N and K concentrations in the first 9.6 years of plantation decreased with the initial P rate. Application of the basal fertilizers improved foliar Cu concentration. Foliar Ca and Mg concentrations increased linearly with the initial P rate. The initial fertilization did not affect foliar Mn concentration in the first 9.6 years. Foliar P concentration increased quadratically with the initial P rate, which accounted for 77–86% of the variation in foliar P concentration. Most of the explained variation in foliar nutrient concentrations was attributable to the plantation age except for foliar P concentration. In the case of foliar P concentration, 53% was explained by the initial P rate, 31% by the plantation age and 2% by the positive interaction between the initial P rate and the plantation age. Foliar P concentration of slash pine at age 11.5 years increased quadratically with the initial P rate and linearly with the additional 40 kg P ha^–1 applied at age 10 years, accounting for 81% of the variation in the foliar P concentration. Foliar nutrient analysis indicated that P was the major limiting nutrient affecting the stand growth of slash pine in the first 11.5 years.     

甲醛法测定铵盐含氮量

对甲醛法测定铵盐含氮量进行了研究，提出采用百里酚酞和酚酞混和指示剂进行测定。该法简单、快速、准确，能满足生产实际和样品检验需要。     

Microwave assisted ultrafast synthesis of graphene oxide based magnetic nano composite for environmental remediation

We have successfully synthesized multi-layer graphene oxide and graphene oxide based magnetic nanocomposite (M/GO) by microwave-assisted modified Hummers’ method for removal of toxic lead (Pb²⁺) and cadmium (Cd²⁺) ions from aqueous solution. The X-ray diffraction spectra of synthesized graphene oxide and M/GO confirm increased interlayer spacing along c-axis. Raman spectra revealed the good quality of synthesized GO and M/GO. The wrinkles were seen in the SEM images of synthesized graphene oxide. The presence of conjugated double bond (CC) and carbonyl (CO) were confirmed by using the UV–Vis spectroscopic spectra. Brunauer–Emmett–Teller (BET) analysis showed high (126 m²/g) surface area M/GO composite which accounts for large number of active binding sites for the adsorption of heavy metal ions. The adsorption studies revealed that Pb²⁺ ions were efficiently adsorbed on GO sheets. Interestingly, M/GO showed better adsorption for cadmium ions.     

SEQUENTIAL LOOP CLOSING IDENTIFICATION OF MULTIVARIABLE PROCESSES USING THE BIASED RELAY FEEDBACK METHOD

Each controller in multiloop control systems for multivariable processes can be tuned sequentially with the ultimate information for the paired input and output while former loops have been closed, and hence, single-input single-output autotuning methods can be applied. In this sequential autotuning for multiloop control systems, several iterations are usually required for better control performances. Especially when pairings are undesirable, the autotuning sequences should be repeated with correct pairings, which result in long field experiments. Here, to avoid this drawback, a simple method to identify process models while loops are being sequentially tuned is proposed. The identified models can be used to correct pairings of multiloop control systems and to improve tuning performances without several field iterations. In addition, they can be used to obtain model-based control systems such as decoupling control systems.     

由二氧化碳出发合成有机碳酸酯

对以二氧化碳为原料合成有机碳酸酯的环氧路线、酯交换和直接合成方法作了综合评述 ,认为直接合成是最佳的合成路线。碳酸酯的直接合成可在均相及多相催化体系中进行 ,负载金属、金属甲氧基化合物及碱均可作为催化剂。直接法研究的关键在于高性能催化剂的开发、由二氧化碳对金属 -氧键插入反应导致的催化循环的构筑及耦合反应的应用。     

水热法合成(Mn,Zn)Fe_2O_4磁性晶体粉末

采用水热加工技术研究（Ｍｎ，Ｚｎ）Ｆｅ２Ｏ４晶体粉末的合成条件，对水热体系的碱度、温度、时间进行了系统实验．结果表明在ｐＨ＝７～１２．５范围内可有效合成（Ｍｎ，Ｚｎ）Ｆｅ２Ｏ４．当温度在１９０～２２０℃时，完成合成所需的时间为１～２ｈ，提高碱度有利于合成反应．本文还初步探讨了（Ｍｎ，Ｚｎ）Ｆｅ２Ｏ４的合成机理，为扩大实验提供依据．     

钛掺杂硅胶块体吸附剂

以陶瓷纤维纸片为基材,顺次经水玻璃、酸性钛盐溶液浸渍共沉淀制得新型陶瓷基钛掺杂硅胶块体吸附剂.多孔介质表面分析显示:掺杂硅胶孔径在0.5～6 nm范围,以中孔为主.Fourier变换红外谱在波数954 cm 1处的特征吸收峰表明吸附剂中形成了Si-O-Ti键.根据掺杂前后固体魔角核磁共振硅谱中硅原子化学位移的变化(向高场方向移动)及X射线光电子能谱中各原子结合能的变化(Ti2p3/2的结合能随钛含量的增加而增加,而Si2p,O1s的结合能则呈相反趋势)进一步表明:钛原子替代硅原子进入硅胶网络.热重分析及烧结实验结果显示:钛掺杂吸附剂具有更好的热稳定性.新型吸附剂优异的吸附性能除了与其高的比表面积相关外,还与Ti-O键对水分子的亲合力紧密相关,其耐热性能增强与形成高热稳定性Ti-O Si键及材料表面导热性能提高有关.     

粉末涂料涂装工艺(Ⅰ)

介绍了粉末涂料的几种涂装方法及其原理、特点、应用范围和进展情况，重点介绍了静电粉末涂装方法。     

一种新的感度试验与分析方法

介绍了一种新的感度试验设计与分析方法，即Ｎｅｙｅｒ法。它利用最大似然估计来选择下一个试验水平，利用似然比试验可计算任意置信区间，并以Ｃｒａｍｅｒ－Ｒａｏ理论为基础，可以分析所有感度试验结果。