Hydrolytic stability and protective properties of polyurethane oligomers based on polyester/ether/polyols

The present study deals with effect of the type and chemical character of incorporated polyester/polyether blocks on the hydrolytic stability of crosslinked polyurethane oligomers. Diffusion parameters of the investigated polyurethane oligomers, giving information concerning chemical changes taking place in neutral, basic and acidic aqueous environments, have also been determined.     

HHD型核子秤电离室物理性能检测

HHD型核子秤电离室已成功地使用于HCS型核子秤.对它的各种物理性能指标进行了检测,各项性能指标都达到了设计要求。     

从头算法对甲基磺酸拉曼光谱振动频率指认

对液态的甲基磺酸进行了拉曼光谱测定。采取从头算法用各种不同的基组 (最大的基组为MP2 / 6 -311+G( 2d ,2 p) )对甲基磺酸的结构和光谱进行了计算 ,得到了甲基磺酸的结构参数及稳定构象信息。采用一个具有Ci 对称的二聚体模型解释了甲基磺酸的液态光谱。对单体和二聚体的甲基磺酸进行了简正坐标计算 ,结果表明二聚体结构是液态甲基磺酸聚积态分子的合理模型。     

Oxidation behavior of silicide coating on Ti3SiC2-based ceramic

A silicide coating was prepared on Ti₃SiC₂-based ceramic by pack cementation to improve the oxidation resistance of Ti₃SiC₂, which is a technologically important material for high temperature applications. The microstructure, phase composition and oxidation resistance of the coated sample were investigated. The results demonstrated that the silicide coating was mainly composed of TiSi₂ and SiC. A single layer of a mixture of SiO₂ and TiO₂ was formed on the surface of the coated sample during isothermal oxidation at 1100 °C and 1200 °C for 20h. Compared to Ti₃SiC₂, the parabolic rate constant of silicide coated Ti₃SiC₂ decreased by 2~3 orders of magnitude. Furthermore, the coated sample showed much better cyclic oxidation resistance than Ti₃SiC₂ during the cyclic oxidation at 1100 °C for 400 times. However, during the preparation of the coating, a number of fine cracks formed in the outer layer of the coating. When these cracks penetrated the whole coating during the cyclic oxidation, the oxidation rate was accelerated, which degraded the oxidation resistance. Electronic Publication     

1000m~3/h空分设备板翅式换热器带水冻堵故障处理

介绍 10 0 0m3 /h空分设备板翅式换热器循环水加杀菌剂产生泡沫 ,引起空冷塔雾沫夹带而严重带水冻堵的故障现象、原因及处理措施 ,并指出运行中的不足。     

On using peak amplitude and rise time for AE source characterization

Acoustic Emission (AE) signals, which are electrical version of acoustic emissions, are usually analysed using a set of signal parameters. The major objective of signal analysis is to study the characteristics of the sources of emissions. Peak amplitude(P _a ) and rise time(R _t ) are two such parameters used for source characterization. In this paper, we theoretically investigate the efficiency ofP _a andR _t to classify and characterize AE sources by modelling the input stress pulse and transducer. Analytical expressions obtained forP _a andR _t clearly indicate their use and efficiency for source characterization. It is believed that these results may be of use to investigators in areas like control systems and signal processing also     

多用途放射性废物焚烧系统工程验证试验

对建立的多用途放射性废物焚烧系统，进行了工程验证试验。试验主要包括固体废物（包括树脂）和废油焚烧及烟气净化时系统的性能测定、非放示踪试验、72h连续运行考验等。经过共计500多小时的试验，验证了工艺流程、主要设备结构、仪表测控及系统安全等设计的可行性和可靠性；系统运行平稳，设备及仪表工作正常。本系统可一炉多用，其处理能力、减容系数、焚烧灰中残炭率以及系统总去污系数等指标，均达到了设计要求。     

基于DSP的图像灰度校正

本文介绍了一个在用户视频环境下，采用典型非线性因子2.2进行非线性校正的公式；进而给出采用TMS320C2000进行图像灰度校正的软件设计方法。     

提高储层预测精度技术思路与对策

采用地质、地震、测井人员协同一体化作业，对地下地质目标进行综合预测与评价，可提高储层预测精度，降低预测结果的多解性。主要方法是针对不同的区块，采用不同的方法和对策，首先从单井储层划分对比入手，建立储层沉积模式，同时对地震数据目的层段进行精细解释，建立地层构造模式，用沉积、构造等地质规律来指导和约束反演；利用测井资料对地震资料进行精细标定，建立各井的单井波阻抗模型，建立井数据和地震数据沟通的桥梁；在严格的测井约束、地质模型约束、层位控制下进行储层反演；充分利用地质、地震反演结果、地震参数提取及分析结果、测井、测试和分析化验等资料对储层预测结果进行综合分析与评价。该方法应用于长庆、大庆、准噶尔等实际区块，取得了较好的效果。