铸态QT450-15高韧性球墨铸铁的生产

分析了化学成分、脱硫处理、球化及孕育处理等主要工艺因素对铸态QT450-15高韧性球墨铸铁铸件生产的影响.     

管子钳铝合金钳套液态挤压工艺及模具设计

采用液态挤压代替压力铸造及热模锻生产铝合金钳套，不仅克服了压铸件内部容易形成气孔和氧化夹杂的缺陷，而且减少了热模锻的投资、提高了材料利用率及降低了产品成本。本文介绍了钳套材料、挤压件设计、模具结构，分析了液态挤压的工艺参数及选择依据、产品技术经济性。     

基于知识的汽车覆盖件模具标准化数控编程

针对汽车覆盖件模具传统数控编程的缺陷，利用UG软件提供的自动化编程工具，提出了一套基于知识的汽车覆盖件模具标准化数控编程方案，提高了编程效率．而且保证了数控程序的可靠性，并举出了流程模板开发的实例。     

铝压力锅盖成形工艺及模具设计

分析了铝压力锅盖的冲压工艺 ,设计了1副 拉伸模和 1副折牙模 ,满足了生产的要求。介绍了模具结构 ,对于同类零件的生产具有借鉴作用     

船用中速柴油机定时齿轮罩壳均衡凝固工艺

通过对定时齿轮罩壳的结构分析,采用大孔出流理论设计浇注系统,根据均衡凝固有限补缩原理,设计出气冒口,实现薄壁壳体的浇口当冒口铸造工艺,提高铸件成品率,降低铸件的成本.     

Novel process for cover glass with ideal stress distribution

Abstract — This paper proposes a new process to manufacture cover glass that overcomes a strength trade‐off between the face and the edge. In the process, alkali barrier films are deposited on glass faces before an ion exchange process in order to control face stress properties without inhibiting the edge strengthening. As a demonstration of the process, alkali‐alumino‐silicate glass sheets with sputter‐deposited SiO₂ films were chemically strengthened, and then their stress properties and strengths were investigated. As a result, thicker SiO₂ films cause lower face DOL (depth of strengthened layer), and it is observed that the faces have lower DOL than the edges. In strength tests corresponding to major fracture modes of smartphone cover glass, specimens with 80–100 nm films have more balanced face performance and better edge impact strengths than the no‐film specimen.     

A study of 3D cover glass design that improves handheld device drop reliability

Cover glass in commercial handheld devices is now evolving from flat (2D) to curved (3D) shapes. For example, some commercial devices have utilized sled‐shape cover glass, 1 which partially covers long edges of the device. According to the patents published by key handheld manufacturers, 2 , 3 we can expect more variety of 3D shaped cover glass for handheld devices in the market. In this study, we have focused on the reliability of 3D cover glass when it is dropped to a rigid surface. The key parameters under study are the corner/edge bend radius and angle of the cover glass, which determines the 3D shape of the cover glass. To achieve this goal, we developed a finite element model to simulate the drop 4 - 13 of a handheld device with 3D‐shaped glass. The model uses explicit algorithm to simulate the high speed impact on the device during the drop test. The glass performance was evaluated based on contact force between the glass and the ground and maximum principal stress in the glass. We showed that to avoid severe damage because of first impact between the glass and the ground, the bend angle of 3D glass has to be in the range between 0 and 45°. For drop angles of 45° and higher, with the proposed glass bend angle, the impact can be taken over by the edge of the back cover of the device. In addition, we showed that optimum glass bend radius is in the range of 3.8 mm and larger. This is required to reduce stress in glass because of impact. The approach and conclusions from the current study can serve as a general guideline to improve the 3D cover glass reliability of a handheld device.     

寒冷地区电站长距离输水明渠冬季运行方式探讨

通过大量工程资料收集和类似工程经验分析,对寒冷地区引水式水电站长距离输水明渠在冬季各种输、排冰运行方式的适用性进行了对比分析,着重对结冰盖运行方式的建筑物布置、流量控制和水位控制等进行深入分析和研究,提出了完整的分段壅水结冰盖输水方式的输水渠道建筑物布置、水位运行控制的设计和运行控制方法,消除了寒冷地区电站输水长明渠冬季运行中的冰冻危害问题,并成功运用于实际工程设计和运行。     

洞庭湖区土地覆被对长江水位变化的响应分析

为了研究长江水位的变化对洞庭湖区土地覆被的影响,基于洞庭湖区近26 a土地覆被遥感影像的解译成果,分别构建了东洞庭湖区和西+南洞庭湖区水域、泥滩、草洲、芦苇地、裸地和防护林面积与对应时段城陵矶水位之间的回归方程。分析结果显示：东洞庭湖区水域、泥滩、草洲面积和西+南洞庭湖区水域面积与城陵矶水位之间具有极显著的相关关系,而芦苇地、裸地和防护林等面积与城陵矶水位之间的关系并不显著;城陵矶水位变化对东洞庭湖区土地覆被的影响明显高于对西+南洞庭湖区土地覆被的影响。此外,依据所构建回归方程,预测长江上游大型梯级电站运行将导致洞庭湖区呈现泥滩和草洲挤占水域的态势。