不饱和酸结构对不饱和聚酯树脂固化行为的影响

通过IR分析了用顺酐和反酸与聚酯合成不饱和聚酯树脂的反应机理,讨论了二种树脂体系固化放热曲线不同的原因。     

用于光纤并带的UV固化胶粘剂性能的研究

研究了用于光纤带的紫外光固化胶粘剂的剥离性、柔韧性、拉伸强度和延伸率的影响因素。     

Pozzolanic properties of reject fly ash in blended cement pastes

Low-grade fly ash (reject fly ash, r-FA), a significant portion of the pulverized fuel ash (PFA) produced from coal-fired power plants and rejected from the ash classifying process, has remained unused due to its high carbon content and large particle size. But it may be used in certain areas, such as in solidification and stabilization processes of hazardous waste and materials for road base or subbase construction, which require relatively lower strength and reactivity. It is therefore necessary to extend research on the properties of r-FA and explore its possible applications. This paper presents experimental results of a study on the mechanical and hydration properties of cementitious materials prepared by blending r-FA with ordinary Portland cement (OPC). Parallel mixes were also prepared with the good ash [i.e., classified fine fly ash (f-FA)] for comparison. Selective chemical activators were added to the mix to study the effects of the activators on the properties of the blend system. The results show that r-FA generally has a lower rate of hydration than f-FA particularly at the early stage of hydration. Adding Ca(OH)₂ alone almost had no effect on accelerating the hydration of r-FA. But adding a small quantity of Na₂SO₄ or K₂SO₄ together with Ca(OH)₂ significantly accelerated the hydration reaction. The results of the compressive strength measurement correlated nicely with the degree of hydration results. It was also found that water-to-binder ratio (w/b) was an important factor in affecting the strength development and the hydration degree of r-FA pastes.     

基于变权灰色关联法的长江荆南三口地区水资源短缺程度分析

对荆南三口地区水资源短缺程度进行分析研究,为实现区域水资源可持续合理利用提供科学依据。在水资源短缺评价研究中,前期研究成果大多采用常权法确定评价指标,致使评价指标产生状态失衡。将变权理论引入到水资源短缺程度分析中,从而确定评价指标变权重,并结合灰色关联法,构建水资源短缺程度分析的变权灰色关联法模型并加以应用。最终得出荆南三口地区三县的水资源短缺程度均为轻度缺水,其缺水程度排序为:华容县南县安乡县。利用变权灰色关联法计算水资源短缺程度,方法可行,结果合理,满足了评价指标均衡性要求。     

真空粉末绝热低温贮罐制造的部分工艺方法

在真空粉末绝热低温贮罐的制造过程中、通过吸附器分子筛的活化、夹层真空系统的处理和充装珠光砂等工艺方法的改进,可较大地缩短产品的制造周期并提高产品的质量。     

低温固化双马来酰亚胶树脂基体研究──引发剂的作用

本文以典型的ＸＵ２９２双马体系作为研究对象，选用引发剂加速树脂的固化反应，以期得到低温固化耐热的双马树脂体系。研究结果表明，引发剂能很有效地降低双马树脂的固化温度，低温固化阶段比高温固化阶段对树脂耐热性的影响更大。经１２０℃／８ｈ＋１４０℃／２ｈ＋１６０℃／２ｈ固化树脂的热变形温度为２６６℃，再经１８０℃／８ｈ的后处理，热变形温度达到３００℃。     

二乙烯基硅氧烷-双苯并环丁烯树脂的制备与性能研究

苯并环丁烯树脂在许多高科技领域都有应用,是当今高性能树脂研究的热点之一.本文采用Heck反应合成了二乙烯基硅氧烷-双苯并环丁烯树脂,并用红外、质谱、核磁共振对其结构进行了表征,研究了该树脂的固化反应,最后测定了固化树脂的物理性能.研究结果表明,二乙烯基硅氧烷-双苯并环丁烯固化树脂具有优异的热稳定性能和介电性能.     

丁腈胶乳的加氢反应

采用水合肼/过氧化氢氧化还原体系，以硼酸为催化剂，在常压下进行丁腈胶乳的氢化反应，研究了过氧化氢加入方式，硼酸和水合肼用量，反应温度及反应时间对丁腈胶乳加氢度的影响。结果表明，过氧化氢连续滴加再附加室温条件，氢化反应效果最好。当硼酸用量为2.64mmol，水合肼用量为95.2mmol，过氧化氮用量为79.3mmol。在60℃，6h下，丁腈胶乳的加氢度可达到90%以上。     

Effects of reaction and cure temperatures on morphology and properties of poly(ester‐urethane)

Poly(ester‐urethane) was synthesized from poly(ethylene glycol adipate) (PEG) and 2,4‐toluene diisocyanate (TDI) to study the effects of reaction temperature and cure temperature on the crystallization behavior, morphology, and mechanical properties of the semicrystalline polyurethane (PU). PEG as soft segment was first reacted with TDI as hard segment at 90, 100, and 110°C, respectively, to obtain three kinds of PU prepolymers, coded as PEPU‐90, PEPU‐100, and PEPU‐110. Then the PU prepolymers were crosslinked by 1,1,1‐tris (hydroxylmethyl) propane (TMP) and were cured at 18, 25, 40, 60, and 80°C. Their structure and properties were characterized by attenuated total reflection Fourier transform infrared, wide‐angle X‐ray diffraction, scanning electron microscopy, dynamic mechanical analysis, and tensile testing. With an increase of the reaction temperature from 90 to 100°C, the crystallinity degree of soft segment decreased, but interaction between soft and hard segments enhanced, leading to the increase of the glass transition temperature (T_g) of soft domain and tensile strength. When the cure temperature was above 60°C, miscibility between soft and hard segments of the PEPU films was improved, resulting in relatively low crystallinity and elongation at break, but high soft segment T_g and tensile strength. On the whole, all of the PEPU‐90, PEPU‐100, and PEPU‐110 films cured above 60°C possessed higher tensile strength and elongation at break than that of the films cured at other temperatures. The results revealed that the reaction temperature and cure temperature play an important role in the improvement of the crosslinking structure and mechanical properties of the semicrystalline PU. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 100: 708–714, 2006     

A New Derivation of the Cubature Kalman Filters

This paper investigates the cubature Kalman filtering (CKF) for nonlinear dynamic systems. This third‐degree rule based filter employs a spherical‐radial cubature rule to numerically compute the integrals encountered in nonlinear filtering problems, thereby removing the requirements of explicitly computing the Jacobians. The cubature rule, however, requires computing the intractable integrals over a high‐dimensional spherical region for multidimensional applications. Moreover, the cubature formula that has been used to construct the spherical cubature formula has some demerits, most notably its inconvenient properties in computation and low estimation accuracy. Aimed at these issues, a general class of CKFs that uses only cubature rules is derived in this paper. It can be shown that the conventional CKF is a special case of the proposed algorithm. The paper also includes higher‐degree CKFs, especially two representative types of the fifth‐degree CKFs. Performance of the proposed algorithms is demonstrated via two target tracking problems. The experimental results, presented herein, illustrate the superior performance of higher‐degree CKFs to conventional nonlinear filters.