弯道岸坡上粗细泥沙统一起动流速公式

该文基于概率论与泥沙起动基本理论,考虑了起动概率、相对暴露度与细颗粒泥沙间黏结力和附加下压力对泥沙起动的影响,采用滑动起动模型,从理论上推导出了适用于弯道岸坡上粗、细泥沙颗粒起动的统一流速公式,完善了已有研究成果对泥沙起动概率考虑的不足。公式综合了弯道岸坡、顺直岸坡、正负坡及平坡等条件下粗细泥沙颗粒起动流速计算,可简化为各简单条件下泥沙起动流速公式。通过各简单条件下泥沙起动流速实测资料验证,该文公式与实测数据符合良好。     

华北平原地下水资源承载力评价

华北平原地下水严重超采,并带来一系列资源环境问题,地下水资源承载力的可持续性面临严重挑战。本研究定义了地下水资源承载力的概念,提出了一种定量评价地下水承载力的新方法,并对华北平原地下水承载力进行了评价。结果表明,华北平原地区地下水资源支撑的GDP从2003年的15 608.18亿元迅速提高到2011年的37 584.9亿元,33.3%的地市位于未超采未超载区;华北平原整体及57.2%的地市均位于超采未超载区,已发生地下水超采,但通过提高用水效率,未来社会经济规模仍有发展空间;9.5%的地市位于超采超载区。最后探讨地下水资源的承载力的提高途径,主要包括增加地下水资源可利用量和提高用水效率两方面,其中提高用水效率效果更显著。     

消能锥形阀过流状态研究与优化

消能锥形阀是一种用于中、高水头下的消能控流阀门,其内部结构设计的好坏直接影响着控流效果。为探究消能锥形阀在不同开度下,过流流量及内部流场的变化情况。进行了模型试验与CFD数值模拟计算,试验中发现开度从100%关至85%时出现了流量反而上升、进口压力下降的情况。利用CFD数值模拟的方法对内部流场进行了可视化研究。研究结果表明,在全开状态下锥形阀内部存在以下问题:过强的局部高速高压区域、低速流动死区范围过大、涡流区过度影响高速过流部分。并对锥形阀进行了一定的结构改进,优化了其内部流场情况。     

横流环境中两孔热水浮射流数值模拟研究

为了达到热废水排放过程中热水快速稀释的目的,采用Fluent中Realizable k-ε模型基于SIMPLEC算法,研究了热射流过程中,射流孔间距、初始流速对射流流场、温度场的影响规律。研究表明:随着射流孔间距的增大,第1孔射流对第2孔射流影响程度逐渐减弱且第2孔射流的弯曲程度随之增加;射流与横流作用促使反向涡对的产生,加快了热水与环境水体的掺混度,横断面温度场出现"肾形"分布;当相对孔间距相同时,随着射流初始流速的增加,第1、2孔射流温度衰减速率随之增大;射流初始流速相同时,射流孔间距的增加对第1孔射流轴线温度稀释度影响较小,对第2孔射流的轴线温度稀释度影响相对复杂;S/D=2时,增大热射流的初始流速,为本研究中热水快速稀释的最优方案。     

Characterization of ramie yarn treated with sodium hydroxide and crosslinked by 1,2,3,4‐butanetetracarboxylic acid

Ramie yarns were treated with various concentrations of NaOH at room temperature and subsequently crosslinked with 1,2,3,4‐butanetetracarboxylic acid (BTCA). The microstructure and tensile properties of the treated yarns were characterized. X‐ray diffraction (XRD) and FTIR were used to study the crystalline structure of the resultant ramie yarns. The results showed that the maximum change in the structure of the alkali‐modified ramie took place at 16% NaOH, which would completely transform cellulose I to cellulose II. At the same time, the crystallinity index and fiber orientation decreased to the minimum value while the absorption properties were enhanced. The average degree of polymerization (DP ) of the treated ramie yarns slightly decreased after NaOH treatment. Tensile properties including tenacity, breaking elongation, and modulus of the treated yarns were also investigated. Scanning electron microscopy (SEM) was used to investigate the breakage of the treated yarns. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 91: 1857–1864, 2004     

NPHMC: An R-package for estimating sample size of proportional hazards mixture cure model

Due to advances in medical research, more and more diseases can be cured nowadays, which largely increases the need for an easy-to-use software in calculating sample size of clinical trials with cure fractions. Current available sample size software, such as PROC POWER in SAS, Survival Analysis module in PASS, powerSurvEpi package in R are all based on the standard proportional hazards (PH) model which is not appropriate to design a clinical trial with cure fractions. Instead of the standard PH model, the PH mixture cure model is an important tool in handling the survival data with possible cure fractions. However, there are no tools available that can help design a trial with cure fractions. Therefore, we develop an R package NPHMC to determine the sample size needed for such study design.     

不同促进剂对NR平衡硫化体系的影响

研究了促进剂的种类，促进剂并用及硫化温度等条件对平衡硫化体系（ＥＣ）硫化天然橡胶（ＮＲ）的影响。结果表明，噻唑类促进剂具有较低的硫化返原率，尤其是促进剂ＤＭ，在１３０～１７０℃的硫化温度范围内，硫化２小时的硫化返原率均为０；当促进剂ＮＯＢＳ或ＣＺ与ＤＭ并用时，可缩短正硫化时间；当ＤＭ摩尔分数分别为４０％和５０％左右时，不仅使硫化２小时的硫化返原率为０，而且可使３００％定伸应力保持恒定；以ＮＯＢＳ或ＣＺ为主促进剂时，正硫化时具有较高的拉伸强度和撕裂强度，但硫化２小时时的降低幅度比ＤＭ大。     

玉米芯木聚糖硫酸酯化条件的研究

用碱提法从玉米芯中提取木聚糖,采用氯磺酸吡啶法进行硫酸酯化,通过正交试验确定最佳工艺条件为:吡啶与氯磺酸摩尔比1∶1,温度65℃,时间6h;木聚糖硫酸酯wisX-S通过DEAESepharoseFF层析柱分离得到一个相对分子量为1.3×104的组分,硫酸基取代度为2.24。对此木聚糖硫酸酯进行红外光谱分析,结果显示在波数1259、1228和813cm-1处分别有S=O和C-O-S键的特征吸收峰。     

Recent studies of self-condensation and co-condensation of melamine-formaldehyde resins; cure at low temperatures

Self-condensation: recent research on the chemical pathways by which alcoholated melamine-formaldehyde (MF) resins react with themselves and on the product structures is summarized. Model compound studies suggest that bridges are less stable than widely thought unless they are in hexahydro-1,3,5-triazine ring structures. In acyclic structures they are probably less stable than bridges. Co-condensation: studies of how the composition of MF resins influences the rates of reaction with poly(ol) co-reactant show that MF resins that contain very low levels of and/or functionality are quite reactive. Reactivities of a variety of poly(ester) and acrylic coreactants were studied. By combining reactive MF resins with reactive co-reactants one can formulate high solids enamels that cure by co-condensation in 30 min at 50 to 65 °C with 0.5 parts per hundred (phr) of p-toluenesulfonic acid (p-TSA) catalyst. Cure at 25 °C appears feasible with higher catalyst levels.     

基于Monte Carlo随机模拟的综合交通网络布局评价与决策方法

针对综合交通网络评价指标权重及属性值具有主观性和随机性的特点,提出了基于模拟运算的布局规划方案排序选优的群体随机决策方法.仿真生成满足集结的多个专家对指标重要性偏好排序统计分布的权重,同时考虑交通需求的不确定性对指标值的影响,结合客观熵权计算方案的综合评价值,由多次模拟得到的排序优势度确定方案的优劣差异.根据设计的仿真流程通过算例说明了方法应用的有效性,评价中考虑了主客观因素及随机性特征,可以为网络布局提供科学决策依据.