A study on the curing kinetics of epoxycyclohexyl polyhedral oligomeric silsesquioxanes and hydrogenated carboxylated nitrile rubber by dynamic differential scanning calorimetry

A new organic–inorganic hybrid material was prepared through reactive blending of hydrogenated carboxylated nitrile rubber (HXNBR) with epoxycyclohexyl polyhedral oligomeric silsesquioxanes (epoxycyclohexyl POSS). The structure of the composite was characterized by Fourier transform infrared spectroscopy (FTIR) and solid‐state ¹³C Nuclear Magnetic Resonance spectra (solid‐state ¹³C‐NMR). The differential scanning calorimetry (DSC) at different heating rates was conducted to investigate the curing kinetics. A single overall curing process by an nth‐order function (1 ? α)ⁿ was considered, and multiple‐heating‐rate models (Kissinger, Flynn–Wall–Ozawa, and Crane methods) and the single‐heating‐rate model were employed. The apparent activation energy (E_a) obtained showed dependence on the POSS content and the heating rate (β). The overall reaction order n was practically constant and close to 1. The isoconversion Flynn–Wall–Ozawa method was also performed and fit well in the study. With the single‐heating‐rate model, the average E_a for the compound with a certain POSS content, 66.90–104.13 kJ/mol was greater than that obtained with Kissinger and Flynn–Wall–Ozawa methods. Furthermore, the calculated reaction rate (dα/dt) versus temperature curves fit with the experimental data. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

Sulfite Action in Glycolytic Inhibition: In Vivo Real‐Time Observation by Hyperpolarized 13C NMR Spectroscopy

Detecting the molecular targets of xenobiotic substances in vivo poses a considerable analytical challenge. Here, we describe the use of an NMR‐based tracer methodology for the instantaneous in vivo observation of sulfur(IV) action on cellular metabolism. Specifically, we find that glycolytic flux is directed towards sulfite adducts of dihydroxyacetone phosphate and pyruvate as off‐pathway intermediates that obstruct glycolytic flux. In particular, the pyruvate–sulfite association hinders the formation of downstream metabolites. The apparent in vivo association constant of pyruvate and sulfite agrees with the apparent inhibition constant of CO₂ formation, thus supporting the importance of pyruvate interception in disturbing central metabolism and inhibiting NAD regeneration.     

Study of Catechol and Resorcinol Adsorption Mechanism through Granular Activated Carbon Characterization,pH and Kinetic Study

The present article reports results of the studies on adsorptive removal of catechol and resorcinol from aqueous solution by granular activated carbon (GAC). Physico-chemical characterization including surface area, X-ray diffraction (XRD) analysis, scanning electron microscopy (SEM), energy dispersive X-ray spectroscopy (EDX), and Fourier transform infrared spectroscopy (FTIR) of the GAC before and after catechol and resorcinol adsorption have been done to understand the adsorption mechanism. Bulk density and heating value of GAC were found to be 725 kg/m³ and 8.26 MJ/kg, respectively. The BET surface area was 977.6 m²/g whereas the BET average pore diameter was 18.79 Å. Different experimental parameters like initial pH, initial dosage, contact time, and initial concentration were evaluated for their effect on the adsorption of catechol and resorcinol onto GAC. The kinetics of adsorption was found to be described by the pseudo-second order equation. Results of the intra-particle diffusion model show that the pore diffusion is not the only rate limiting step. The effective diffusion coefficient of catechol and resorcinol were of the order of 2.9 × 10^?10 and 2.2 × 10^?10 m²/s.     

Biosorptive Removal of Ni(II) from Aqueous Solution by Caesalpinia bonducella Seed Powder

The present work deals with the use of Caesalpinia bonducella seed powder (CBSP) as a biosorbent for Ni(II) removal from aqueous solution. The nature and morphology of the sorbent were determined using FTIR spectral, SEM, and EDX analysis. The biosorption characteristics of Ni(II) onto CBSP was investigated as a function of pH, biosorbent dosage, contact time, initial metal ion concentration, and temperature. Langmuir and Freundlich isotherms were used to fit the experimental data. The best interpretation for the equilibrium data was given by the Langmuir isotherm. The maximum biosorption capacity was found to be 188.7 mg/g for Ni(II) at pH 5.0 and at 323 K. The equilibrium biosorption data were well fitted with the pseudo-second-order kinetic equation. The values of thermodynamic parameters (ΔG^o, ΔH^o, and ΔS^o) indicated that the biosorption of Ni(II) onto CBSP was feasible, spontaneous and exothermic in nature. The FTIR results revealed that hydroxyl, amine, carboxyl, and carbonyl functional groups are responsible for Ni(II) biosorption onto CBSP.     

Kinetic Modeling of Arsenic Removal from Water by Ferric Ion Loaded Red Mud

A laboratory study was conducted to investigate the ability of ferric ion loaded red mud (FRM) for the removal of arsenic species from water. The adsorbent material was characterized by scanning electron microscopy, X-ray diffraction, and Fourier transform infrared spectroscopy. For an initial arsenic concentration lower than 0.3 mg/L, the FRM with a dosage of 1 g/L was able to reduce As(III) at pH 7 below 10 µg/L, the maximum contaminant level (MCL) of arsenic in drinking water set by the World Health Organization. In the case of As(V) removal, FRM was also particularly effective in reducing the initial arsenic concentration value of 1 mg/L at pH 2, below the MCL requirement of arsenic for drinking water. According to kinetic sorption data, the initial stage of adsorptions of As(III) and As(V) onto FRM were mainly governed by the external diffusion mechanism; however, upon saturation of the external adsorbent surface, the arsenic species were eventually adsorbed by intraparticle diffusion mechanism. The present results are promising for using the very inexpensive FRM as a low-cost material that is effective in remediating drinking waters contaminated with low concentrations of arsenic species. We report here the sorption kinetics and adsorption mechanisms of As(III) and As(V) on the FRM that has not been decsribed previously.     

Adsorption of Textile Dye on Zinc Stannate Oxide: Equilibrium,Kinetic and Thermodynamics Studies

Zn₂SnO₄ powder was prepared by hydrothermal process at 200°C for 12 h. The material was characterized by X-ray-diffraction and surface area. The synthesized sample presented a pure phase and a surface area of 48.8 m² · g^?1. It was used as adsorbent to remove the Reactive Red 141 that is a azo textile dye. The adsorption kinetics of the textile dye on Zn₂SnO₄ followed the pseudo-second-order model. The adsorption process was found to be controlled by both external mass transfer and intraparticle diffusion. The equilibrium data were in good agreement with both Langmuir and Freundlich isotherms. Thermodynamic parameters were calculated, and the results revealed that the adsorption process is endothermic in nature, with weak forces of the Van der Walls acting.     

Adsorption Studies on the Removal of an Endocrine-Disrupting Compound (Bisphenol A) using Activated Carbon from Rice Straw Agricultural Waste

In this study, we used a two-stage process and potassium hydroxide (KOH) to transform waste biomass (rice straw) into activated carbon and then evaluated the adsorption capacity of the waste for removing bisphenol A (BPA) from an aqueous solution. Activated carbon removed BPA rapidly and effectively because of its high surface area and an adsorptive capacity (181.19 mg/g) that is significantly higher than many other adsorbents that have been developed in the recent past. The native and BPA-loaded adsorbents were characterized by scanning electron microscopy, elemental analysis, and Fourier transform infrared. Different adsorption parameters, such as the initial BPA concentration, contact time, temperature, and pH for BPA adsorption, were studied using a batch system. Equilibrium adsorption isotherms (Langmuir, Freundlich, and Temkin) and kinetics were investigated. The Langmuir model fits the experimental results well, compared to the Freundlich and Temkin models, and a pseudo-second-order equation was successfully used to describe the results of the kinetic studies. This study demonstrates that activated carbon produced from rice straw can be very effective in the adsorption of BPA from aqueous solution.     

Equilibrium,Kinetic, and Thermodynamic Studies on the Biosorption of Selenium (IV) Ions onto Ganoderma Lucidum Biomass

The capacity of Ganoderma lucidum biomass for biosorption of selenium (IV) ions from aqueous solution was studied in a batch mode. In this study the effects of operating parameters such as solution pH, adsorbent dosage, initial metal concentration, contact time, and temperature were investigated. The adsorption capacity of G. lucidum was found to be 126.99 mg g^?1. The biosorption follows pseudo-first order kinetics and the isotherms fit well to both Langmuir and Freundlich isotherm models. Isotherms have been used to determine thermodynamic parameters of the process, that is, free energy, enthalpy, and entropy changes. Furthermore, the biosorbent was characterized by scanning electron microscopy and FT-IR analysis. FT-IR analysis of fungal biomass shows the presence of amino, carboxyl, hydroxyl, and carbonyl groups, which were responsible for the biosorption of selenium(IV) ions. The results indicated that the biomass of G. lucidum is an efficient biosorbent for the removal of selenium (IV) ions from aqueous solutions.     

Adsorptive Removal of Pb(II) and Cu(II) Ions from Aqueous Solutions by Cross-Linked Chitosan-Polyphosphate-Epichlorohydrin Beads

In this study, the cross-linked chitosan-polyphosphate-epichlorohydrin (CCPE) beads were prepared by cross-linking chitosan with both polyphosphate and epichlorohydrin and used as bioadsorbent for the removal of Pb(II) and Cu(II) ions from aqueous solutions. The effects of the dosage of CCPE beads, solution pH, initial metal ion concentration, contact time, and temperature were investigated. Then, three important factors were selected to optimize the removal processes by the orthogonal test. The results show that CCPE beads can effectively remove the Pb(II) and Cu(II) ions from aqueous solutions, and the maximum percentage removals for Pb(II) and Cu(II) ions are 99.7% and 91.2%, respectively. The data show also that the removal processes for both Pb(II) and Cu(II) ions fit best the pseudo-second order kinetic model. Moreover, the decrease of the adsorption ability of CCPE beads is less than 10% after reuse for 9 times, which suggests that CCPE beads have good reusability.     

A Novel Pinus Tabulaeformis Based Adsorbent for the Removal of Malachite Green

Pyrolytic char treated with muffle furnace (TPC), a novel adsorbent, were investigated to enhance its adsorption capacity of malachite green (MG) dye. In addition, the dye adsorption behavior of the TPC in aqueous solution was investigated. The treatment temperature, treatment time, and the particle size of PC had a positive effect on the dye adsorption capacity of TPC. Equilibrium data was fitted well with Langmuir and Redlich-Peterson models with maximum adsorption capacity of 91.24, 111.27, and 119.01 mg g^?1 at 293, 303, and 313 K, respectively. The kinetic of adsorption was found to confirm to the Elovich equation with good correlation and the overall rate of MG uptake was found to be controlled by film diffusion, pore diffusion and particle diffusion. The Boyd plot confirmed that the external mass transfer was the rate-limiting step in the adsorption process. Different thermodynamic parameters have also been evaluated and it was found that the adsorption was spontaneous, feasible, and endothermic in nature. Adsorbents could be regenerated using 0.1 mol L^?1 NaOH solution at least three cycles, with up to 90% recovery. The TPC used in this work proved to be an effective material for the treatment of MG bearing aqueous solutions.