Effect of advanced chilling methods on lipid damage during sardine (Sardina pilchardus) storage

Slurry ice is a biphasic system consisting of small spherical ice crystals surrounded by seawater at subzero temperature. Its effect on lipid damage (hydrolysis and oxidation) was evaluated during the chilled storage of a fatty fish species, sardine (Sardina pilchardus). Slurry ice treatment was checked alone and in combination with ozone and compared to traditional flake icing during a 22‐day storage. Different lipid damage indices (free fatty acids, FFA; peroxide value, PV; thiobarbituric acid index, TBA‐i; fluorescent compounds, FR) were checked and compared to sensory assessment and nucleotide degradation (K value). According to lipid hydrolysis (FFA) and oxidation (PV and FR) developments, slurry ice showed an inhibitory effect (p <0.05) on lipid damage during storage, as well as an inhibition of nucleotide autolytic degradation. Ozonised slurry ice did not provide differences (p >0.05) from slurry ice alone when considering lipid hydrolysis, nucleotide degradation and some lipid oxidation indices (PV and FR), although a higher (p <0.05) TBA‐i was observed at day 22 of storage when compared to flake ice and slurry ice treatments. However, a lower (p <0.05) fluorescence development was observed for fish treated under ozonised slurry ice when compared to traditionally iced fish. Sensory assessment showed a higher shelf life for fish samples treated under ozonised slurry ice than for their counterparts under slurry ice (15 d versus 12 d), while flake icing led to a far shorter shelf life (5 d). According to sensory and biochemical (lipid matter and nucleotide) analysis, slurry ice has proved to be a promising technology for damage inhibition and quality retention in a fatty fish species such as sardine. Ozonised slurry ice was also shown to be useful, since a longer shelf life was obtained in the present experiment and a pro‐oxidant effect of ozone on sardine lipids was not proved.     

电石渣浆的综合治理与利用

介绍了综合治理电石乙炔法生产 PV C 时产生电石渣浆的工艺技术。采用电石渣浆废水全部 闭路循环回用工 艺,实现电石 渣浆上清液 的回收利用;同时以电石渣 代替熟石灰用 于环氧丙烷的生产。取得了显著的经济效益和社会环境效益。     

PE/PP皮芯型复合超短纤维生产技术

本文从原丝质量控制、原料选择、油剂的选用和工艺条件等方面介绍了PE/PP(聚乙烯/聚丙烯)皮芯复合超短纤维生产技术，指出分散性是超短纤维最主要的控制指标，3mm纤维是超短纤维的发展趋势．     

利用蓄电池废硫酸和硼泥制备高品质氢氧化镁

利用废铅酸蓄电池中的废硫酸作为浸取剂,对硼泥中的镁进行回收并制备出高品质的氢氧化镁产品。实验得出了酸浸硼泥的最佳工艺条件：酸浸温度为80℃;酸浸时间为30 min;酸用量为硫酸与硼泥质量比为1.2∶1。利用不同金属水解pH的不同,将酸浸过程中从硼泥和废硫酸中引入的杂质依次去除,得到精制硫酸镁溶液。由精制硫酸镁制取氢氧化镁的工艺条件为：常温下,沉淀剂为氨水,反应终点pH为11,反应时间为2 h,反应物在50℃下陈化12 h,过滤、洗涤后105℃烘干。实验考察了不同沉淀剂对氢氧化镁形貌的影响。所得氢氧化镁纯度在97%以上,粒径在0.1～1μm之间,各项指标均优于中国化工行业标准。     

PTA生产中浆料浓度的先进控制

在PTA生产过程中,TA浆料浓度是一个极其重要的工艺变量,该变量控制的好坏直接影响最终产品的产量和质量。首先分析了浆料浓度的特性,然后根据其特性提出了非线性补偿+预测控制的先进控制策略。实际应用表明,这一控制策略可以显著减少浆料浓度波动、提高装置处理能力。     

浅谈玻璃钢的加工

本文在实际研究和应用的基础上，对玻璃钢的传统加工方法和特种加工方法，如激光切割、纯水射流切割和磨料水射流切割作了简要论述。     

水煤浆添加剂及其研究进展

介绍了水煤浆添加剂结构特征对煤成浆性能影响的研究情况及新型高效添加剂的研究进展。目前制浆添加剂主要分为阴离子表面活性剂和非离子表面活性剂;我国与国外的水煤浆添加剂技术相比,还存在一定的差距,特别是分散降粘性质方面,高效、价廉、适用性广的添加剂为数并不多。     

湿磨干烧生产线料浆脱水工艺的选择

料浆脱水是湿磨干烧的关键工艺，其脱水方法一般有过滤法，喷浆法和混合法三种，其中过滤法包括真空过滤和加压过滤两种，在国外都有应用，国内则大都用前者。南京院在皖维公司1000t/d生产线和白马山厂850t/d生产经上则采用了厢式压滤脱水法，文中就这两种过滤法的过滤工艺特点及其选择进行了分析和探讨。     

神木煤的主要性质对其水煤浆特性的影响

研究我国大型优质神木煤田12个煤样的主要性质,对其水煤浆特性的影响。实验表明,煤中水分和含氧官能团是主要因素,水分中以最高内在水分与水煤浆浓度呈线性相关,提出以最高内在水分作为评价指标。并研究了煤浆的改性方法,一是加热方法使水分和官能团脱除,煤表面亲水性降低,使煤浆浓度大幅度提高,二是除去煤中可溶无机离子,可使煤浆粘度降低,并添加某些电解质有可能提高稳定性。     

High-performance dispersant of coal–water slurry synthesized from wheat straw alkali lignin

Environmental concerns have stimulated interest in utilizing plant-derived materials in various industrial fields. The main objective of the present study was to synthesize a new type of high-performance lignin series dispersant of coal–water slurry (CWS) from wheat straw alkali lignin (WAL), and determine the affecting factors in the reaction and the application performance for CWS preparation. The experimental results showed that the inherent viscosity and the sulfonic group content of the modified wheat straw alkali lignin (MSL) are the key factors affecting its dispersing effect for CWS. In the reaction, the reactant mass concentration and the sulfonating agent amount were changed to obtain the MSL with different inherent viscosities and sulfonic group contents, and the MSL with intermediate inherent viscosity (6.0 ml/g) and higher sulfonic group content (1.80 mmol g^− 1) was found to have excellent dispersing effect for CWS. The MSL obtained from optimized process was used as dispersant for CWS preparation, the studies of the properties of CWS showed that MSL has similar dispersing effect with naphtalenesulfonate–formaldehyde condensate, and far better dispersing effect than lignosulphonate. Recently this kind of new dispersant has been applied in several power plants in China.