Incorporation of different crystallizable amide blocks in segmented poly(ester amide)s

High molecular weight segmented poly(ester amide)s were prepared by melt polycondensation of dimethyl adipate, 1,4-butanediol and a symmetrical bisamide-diol based on ε-caprolactone and 1,2-diaminoethane or 1,4-diaminobutane. FT-IR and WAXD analysis revealed that segmented poly(ester amide)s based on the 1,4-diaminobutane (PEA(4)) give an α-type crystalline phase whereas polymers based on the 1,2-diaminoethane (PEA(2)) give a mixture of α- and γ-type crystalline phases with the latter being similar to γ-crystals present in odd-even nylons. PEA(2) and PEA(4) polymers with a hard segment content of 25 or 50 mol% have a micro-phase separated structure with an amide-rich hard phase and an ester-rich flexible soft phase. All polymers have a glass transition temperature below room temperature and melt transitions are present at 62-70 °C (T_m,1) and at 75-130 °C (T_m,2) with the latter being highest at higher hard segment content. The two melt transitions are ascribed to melting of crystals comprising single ester amide sequences and two or more ester amide sequences, respectively. These polymers have an elastic modulus in the range of 159-359 MPa, a stress at break in the range of 15-25 MPa combined with a high strain at break (590-810%). The thermal and mechanical properties are not influenced by the different crystalline structures of the polymers, only by the amount of crystallizable hard segment present.     

环丙烷甲酰氯的合成

环丙烷甲酸异丙酯因异丙基的位阻很大，所以其很难水解，即使加热回流12h，得率也只有68．6％，选用合适的相转移催化剂使得率超过了84％。由环丙烷甲酸制备环丙烷甲酰氯比较简单，文献报道得率为94．08％，通过对其合成条件的优化，使得率超过了97．2％。     

假紫罗兰酮环化工艺条件探讨

讨论了假紫罗兰酮酸化环合制备紫罗兰酮不同工艺条件对产品收率和组成的影响,结合有关文献重点探讨了作为维生素A工业合成原料的β-紫罗兰酮合成工艺条件的改进和优化,尤其是硫酸有机稀释剂(溶剂)的应用。     

SO_4~(2-)/ZrO_2-Al_2O_3催化合成脂肪酸季戊四醇酯的研究

以脂肪酸和季戊四醇为原料,三甲苯为带水剂,SO42-/ZrO2-Al2O3固体超强酸催化,合成脂肪酸季戊四醇酯。实验结果表明,控制酯化温度(180～200)℃、醇酸物质的量比为1∶5.6、催化剂加入量为原料总量的0.9%和反应时间为4h时,可获得最佳反应结果,酯化率达99.88%。IR谱表明,产品中羟基吸收峰基本消失,证明酯化反应较充分和完全。     

环氧乙烯基酯树脂 (Ⅱ)环氧乙烯基酯树脂在酸、碱、盐溶液中的稳定性

较为详细论述了影响环氧乙烯基酯树脂在酸、碱、盐溶液中稳定性的各种结构因素。     

Fuel properties and emissions of soybean oil esters as diesel fuel

The effects of using blends of methyl and isopropyl esters of soybean oil with No. 2 diesel fuel were studied at several steady-state operating conditions in a four-cylinder turbocharged diesel engine. Fuel blends that contained 20, 50, and 70% methyl soyate and 20 and 50% isopropyl soyate were tested. Fuel properties, such as cetane number, also were investigated. Both methyl and isopropyl esters provided significant reductions in particulate emissions compared with No. 2 diesel fuel. A blend of 50% methyl ester and 50% No. 2 diesel fuel provided a reduction of 37% in the carbon portion of the particulates and 25% in the total particulates. The 50% blend of isopropyl ester and 50% No. 2 diesel fuel gave a 55% reduction in carbon and a 28% reduction in total particulate emissions. Emissions of carbon monoxide and unburned hydrocarbons also were reduced significantly. Oxides of nitrogen increased by 12%.     

有机硅改性无皂丙烯酸酯类水分散体的合成技术及其产业化实践

介绍了以特殊结构的纳米无机体材料为骨架,采用无皂工艺合成的以有机硅材料进行改性的具有LIPN结构的丙烯酸酯类水分散体的性能及其产业化实践的情况,并对以该水分散体开发的水性木器涂料的性能作了对比说明。实践表明,以该丙烯酸水分散体开发的水性木器涂料较好地解决了目前水性木器涂料在硬度、光泽度、丰满度、回粘温度等方面不如溶剂型涂料的弱点,且该分散体的合成工艺独特、成本低廉,利于产业化和下游厂家开发使用。     

头孢匹罗的合成

丙炔胺和环戊酮在无水乙醇中回流反应5 h生成2,3-环戊烯并吡啶,收率55%。7-氨基头孢烷酸和2-甲氧亚氨基-2-(2-氨基-4-噻唑基)-(z)-硫代乙酸苯胼噻唑酯(AE活性酯)发生酰化反应生成头孢噻肟酸,收率90%。在三甲基碘硅烷作用下,头孢噻肟酸与2,3-环戊烯并吡啶反应,生成头孢匹罗,收率65%1。H NMR对产物及中间体进行了鉴定。     

Estimation of heat of combustion of triglycerides and fatty acid methyl esters

Equations were developed for the estimation of gross heat of combustion (HG) of triglycerides (TGs) and fatty acid methyl esters (FAMEs) from their saponification number (SN) and iodine value (IV). HG of TG=1,896,000/SN − 0.6 IV — 1600 and HG of FAME=618,000/SN − 0.08 IV — 430. When these equations were tested on cottonseed oil, soybean oil, partially hydrogenated soybean oil, peanut oil, sunflower oil, sunflower oil methyl esters, soybean oil methyl esters and cottonseed oil methyl esters, predicted HG values agreed well with those reported in the literature.     

固定化微生物细胞降解邻苯二甲酸二丁酯

The biodegradation of di-n-butyl phthalate （DBP） using immobilized microbial cells was carded out in an internal airlift loop reactor with ceramic honeycomb supports. A strain that is capable of degrading DBP was isolated from the activated sludge and identified as Bacillus sp. using 16S rDNA sequential analysis. Bacillus sp. could be rapidly attached onto the ceramic honeycomb supports. The immobilized cells could effectively degrade DBP in batch and continuous experiments. When the influent concentration of DBP was 50mg·L^-1, the effluent DBP reached less than lmg.L i with 6h hydraulic retention time （HRT） in continuous experiment. The immobilized microbial cells could grow and accumulate through the biodegradation of DBP, and the rate of degradation is accordingly increased. The possible pathway of DBP biodegradation using immobilized cells was tentatively proposed.