国外大型调水工程渠道运行控制综述

与常规的以经验为主的运行方式相比，考虑了水动力学影响、以多渠池串联的整个渠道系统为研究对象的渠道运行控制在增加调水工程的安全性、降低运行成本、提高输水效率等方面能取得更佳的效果。国外关于调水工程渠道控制的研究起步较早，基于非线性偏微分圣维南方程组发展了多种离散化、线性化等简化方法，建立了相应的控制模型，并从不同角度确定了其控制方法以及控制算法。参考已有的研究思路和方法，总结国外渠道运行控制的成果，对我国南水北调工程的运行控制有着重要的借鉴意义。     

Intelligent handling of data by integration of commonsense reasoning

Any intelligent problem solving system should be able, given the known data on a case, to decide whether some item of information is true, false or unknown. In this paper the way in which various forms of commonsense reasoning can be integrated to provide such decisions is described. To this end three structural types of knowledge defined over data, and four strategies for exploiting these structures, are identified. ‘Decide-Status’ integrates the reasoning strategies into a task frame. This frame structure not only integrates the reasoning but also affords the appropriate facilities for providing strategic justifications for its conclusions, if required.     

Internal-corrosion inhibitors for pipelines carrying deaerated heating water

The effect of internal-corrosion inhibitors on heating-system pipelines is investigated. Tests were conducted on a testing device for polarization measurements under conditions corresponding to the Rostov Heat-Supply System. The concentration of OEDP-zinc, which provides a high degree of protection from general corrosion, is determined. The reagent has been successfully incorporated into the Rostov No. 2 TPP. __________ Translated from élektricheskie Stantsii, No. 7, July 2007, pp. 37–43.     

Internal-corrosion inhibitors for pipelines in heat-supply systems carrying water with a high oxygen content

The reliability of heat-supply systems is determined primarily by internal corrosion of the pipelines. The concentration of oxygen in the water exerts a major influence on the corrosion. In systems with a standard oxygen content, OéDF-Zn is a highly effective corrosion inhibitor. However, there are systems in which the quality of deaeration of the make-up water of the heat-supply system is low (or deaeration is nonexistent), and the concentration of oxygen is considerably above the standard value. Classed among these systems, for example, are the HWS systems, which are incorporated into closed heat-supply systems. The oxygen concentration in these systems is analyzed to assess the situation. __________ Translated from élektricheskie Stantsii, No. 6, June 2007, pp. 35–39.     

Law,liability and expert systems

This paper examines some of the possible legal implications of the production, marketing and use of expert systems. The relevance of a legally useful definition of expert systems, comprising systems designed for use both by laymen and professionals, is related to the distinctions inherent in the legal doctrine underlying provision of goods and provision of services. The liability of the sellers and users of, and contributors to, expert systems are examined in terms of professional malpractice as well as product liability. A recurring theme indicates that legislators may be inclined to restrict possibilities of liability suits in order to avoid disincentives to the creation of expert systems.     

Robustness analysis of responses of vibration control structures with uncertain parameters using interval algorithm

Variations in system parameters due to uncertainties may result in system performance deterioration. Uncertainties in modeling of structures are often considered to ensure that control system is robust with respect to response errors. Hence, the uncertain concept plays an important role in vibration control of the engineering structures. The paper discusses the robustness of responses of vibration control systems with the uncertain parameters. The vibration control problem of an uncertain system is approximated by a deterministic one. The uncertain parameters are described by interval variables. The uncertain state matrix is constructed directly using system physical parameters and avoided to use bounds in Euclidean norm. The feedback gain matrix is determined based on the deterministic systems, and then it is applied to the actual uncertain systems. A method to calculate the upper and lower bounds of responses of the closed-loop system with uncertain parameters is presented. The upper bounds of responses can be used to estimate the robustness of responses of the controlled system with uncertain parameters. Two numerical examples are given to illustrate the applications of the present approach.     

Reconfiguration Aspects and a Reconfigurable Outer Block Interleaver for 3G Applications

Reconfiguration concept represents reconfigurable functionalities of the radio interface for mobile radio systems. Particularly for the physical layer, some possible reconfigurable architectures can be identified. We focus on outer interleaving for turbo codes, which can improve their performance in flat Rayleigh fading environment. The larger the number of columns in the outer interleaver, the better is the performance, but with the penalty of more complexity and delay. Furthermore, an incorrect choice of the number of columns can increase the bit and frame error rates. Therefore, it would be advantageous to reconfigure the outer interleaver in different operating environments with the optimum number of columns. Using two different data frame lengths, in this contribution simulation results are presented for the four possible outer block interleaver configurations specified for the 3GPP mobile standard in the case of flat Rayleigh fading channel. It is shown that different operating environments require an optimum number of columns in terms of bit error rate and frame error rate performance. Finally, frame fade duration is considered and the effect of the product of the Doppler frequency with the frame duration on the performance for the four different 3GPP outer block interleaver configurations is discussed. Costas Chaikalis was born in Athens, Greece, on March 7, 1973. He received the B.Sc. degree in electrical engineering in 1995 from Technological Educational Institute of Lamia, Greece. He also received the M.Sc. and Ph.D. degrees from Department of Electronics and Telecommunications, University of Bradford, Bradford, UK in 1999 and 2003, respectively. During his doctoral studies he worked as a Research Assistant for Mobile Virtual Center of Excellence (Mobile VCE), Terminals Group, UK. Since 2003, he is a lecturer in the Department of Electrical Engineering, Technological Educational Institute of Lamia, Greece. His research interests are in all areas of mobile communications but especially in forward error correction coding, reconfigurable (software radio) architectures, cross layer architectures and DSP applications.     

Multi-Reservoir System Optimization using Chlorophyll-<Emphasis Type="Italic">a</Emphasis> Trophic Indexes

The problem of managing water scarcity by resorting to complex interconnected multi-source water systems needs to utilize management optimization techniques analyzing aspects of water quantity and quality in a common strategy. In the southern regions of Mediterranean Europe, the greater part of water resources for supply systems are derived from artificial reservoirs and water systems can become quite complex since they interconnect several sources and demand centers, as indeed occurs in the Region of Sardinia (Italy). A simplified approach to the requirement to insert water quality aspects in the mathematical optimization model can be achieved by examining the trophic conditions of reservoirs. Trophic State Indexes (TSI) based on Carlson’s (1977) make it possible to insert quality constraints in the water management optimization model also considering complex multi-reservoir and multi-user systems. Model formalization and implementation by the optimization toolkit WARGI (Water Resource system optimization aided by Graphical Interface) (Sechi and Zuddas 2000; Manca et al. 2004; Salis et al. 2005) is illustrated in this paper. The usefulness of a mixed quantity–quality optimization approach has been confirmed by WARGI application to a real multi-reservoir water resources system in southern Sardinia. The optimization model remains computationally efficient dealing with this complex multi-reservoir system and the obtained results can be seen as a reference target in a subsequent simulation phase.     

Recovering spectral data from natural scenes with an RGB digital camera and colored filters

Many spectral‐recovery methods using RGB digital cameras assume the underlying smoothness of illuminant and reflectance spectra, and apply low‐dimensional linear models. The aim of the present work was to test whether a direct‐mapping method could be used instead of a linear‐models approach to recover spectral radiances and reflectances from natural scenes with an RGB digital camera and colored filters. In computer simulations, a conventional RGB digital camera with up to three colored filters was used to image scenes drawn from a hyperspectral image database. Three measures were used to evaluate recovery with the direct‐mapping method: goodness‐of‐fit, root‐mean‐square error, and a color‐difference metric. It was found that with two and three filters both spectral radiances and reflectances could be recovered sufficiently accurately for many practical applications. With little increase in computational complexity, an RGB camera and a few colored filters can provide significantly better recovery of natural scenes than an RGB camera alone. © 2007 Wiley Periodicals, Inc. Col Res Appl, 32, 352–360, 2007     

An accurate and practical buffer allocation model for the buffer cache based on marginal gains

A new dynamic buffer allocation strategy based on the notion of marginal gains is presented for the buffer cache that is used by the operating system to store frequently accessed disk blocks in main memory, and the performance of the proposed strategy is compared with those of previous allocation strategies. In the proposed strategy, marginal gain values are predicted by exploiting functions that approximate the expected number of buffer hits per unit time. Experimental results from both trace-driven simulation and an actual implementation in the FreeBSD operating system show that the proposed strategy accurately predicts the marginal gain values for various workloads resulting in significantly improved buffer hit ratios.