离散动态系统及其应用（Ⅲ）─市场价格模型的数学分析

本文应用动力系统的定性分析方法，对离散市场价格模型作出全局分析，给出了关于离散市场价格系统的稳定性和分支结构的若干定理及其经济意义．     

被动锁模复合环形腔掺饵光纤激光器的自启动分析

本文对被动锁模复合环形腔掺饵光纤激光器的自启动工作特性进行了分析，指出谐振腔内残余反射面的存在是阻碍激光器实现自启动锁模的主要原因。利用半导体激光器有源区的折射率随注入电流的变化而改变的特性，在谐振腔中获得了一个可移动腔镜，克服了腔内残余反射面的影响，实现了锁模的自启动。     

人工智能方法用于熔喷过程在线检测的研究

熔喷生产最终产品质量的控制，对于过程优化具有重要的意义。产品质量的在线检测是过程监测与质量控制必不可少的。本文首次在熔喷系统中引入人工智能的研究方法，对熔喷非织造布的厚度与纤维直径进行在线预测。实测数据与人工神经网络的预测结果吻合较好，从而证实了人工神经网络用于模拟熔喷过程的可行性。网络的输入包括：挤出机温度、喷头温度、熔融体挤出速率、空气流率及接收距离。神经元计算的输出是纤维直径与熔喷非织布的厚度。文中进一步提出了将神经网络与专家系统相结合的研究路线，以实现熔喷过程的优化控制。     

Surface Position-Resolved Thermophysical Properties for Metallic Alloys

Thermophysical properties are collective measures of a material to transport dynamical quantities of physical nature on its surface or through the bulk. As such, the exact nature of couplings between particles in a many-body assembly of building block atoms or molecules sensitively determines their values. The couplings between nearest neighbors are the product of the local elemental composition and the material phase. In this study, thermal cycling of a four-element Wood’s alloy specimen brings out cadmium-rich patches to the top surface of the specimen. An assembly of such patches leads to depth-dependent deviations of elemental composition from that of the bulk. Surface-layer atoms are driven to form a high temperature laser-produced plasma (LPP), and time-resolved spectroscopy of their emissions show the variability of elemental composition over surface positions as well as over depth from the surface. These thermal history-driven composition anomalies contribute to significant variability in the measured values of spectral emissivity and thermal diffusivity.     

Dynamic analysis and drilling degrees of freedom

Finite element methods for dynamic analysis employing elements with drilling degrees of freedom are presented. The formulation is based on a variational principle in which displacements and rotations are interpolated independently. The issue of zero masses corresponding to rotational degrees of freedom is addressed and techniques for defining consistent and lumped rotational mass matrices are presented.     

掺杂聚苯胺的表面接枝共聚改性

化学氧化法制备的聚苯胺表面的亲水性差，本文在本征态和不同酸掺杂志聚苯胺的表面上接枝共聚丙烯丙烯酸和丙烯酰胺，明显地改善了聚苯胺的表面亲水性。结果显示，聚苯胺表面经过等离子体处理后，有利于丙烯酸和丙烯酰胺在聚苯胺表面上的接枝共聚，随着接枝量增多，导电率则随之有所下降，此外，利用ＳＥＭ和反射ＩＲ表征了改性反聚苯胺表面的形态和结构。     

An efficient assumed strain element model with six DOF per node for geometrically non-linear shells

The present paper describes an assumed strain finite element model with six degrees of freedom per node designed for geometrically non-linear shell analysis. An important feature of the present paper is the discussion on the spurious kinematic modes and the assumed strain field in the geometrically non-linear setting. The kinematics of deformation is described by using vector components in contrast to the conventional formulation which requires the use of trigonometric functions of rotational angles. Accordingly, converged solutions can be obtained for load or displacement increments that are much larger than possible with the conventional formulation with rotational angles. In addition, a detailed study of the spurious kinematic modes and the choice of assumed strain field reveals that the same assumed strain field can be used for both geometrically linear and non-linear cases to alleviate element locking while maintaining kinematic stability. It is strongly recommended that the element models, described in the present paper, be used instead of the conventional shell element models that employ rotational angles.     

Forecasting of Turkey's net electricity energy consumption on sectoral bases

In this study forecast of Turkey's net electricity energy consumption on sectoral basis until 2020 is explored. Artificial neural networks (ANN) is preferred as forecasting tool. The reasons behind choosing ANN are the ability of ANN to forecast future values of more than one variable at the same time and to model the nonlinear relation in the data structure. Founded forecast results by ANN are compared with official forecasts.     

Creep of aromatic polyamide fibres

Creep of Kevlar 29, Kevlar 49 and PRD 49-III fibres was investigated. The fibres exhibited transient creep and the strain-time relationship was represented by a logarithmic time law. The creep strain recovered with time when the load was removed. Upon reloading to the same creep stress the strain-time relationship was again logarithmic but the creep rate was reduced. Modulus measurements were made during the creep test and these showed that the modulus increased with time. This result indicated a crystallite rotation mechanism which could account for the experimentally observed creep strain. Creep in PRD 49-III fibres exhibited a small temperature dependence over the temperature range 20°C to 150°C. The apparent creep activation energy was consistent with the range of values reported for hydrogen bonding. This suggests one possible creep mechanism in which the combined action of stress and thermal activation causes rearrangement of intercrystalline bonds in the crystallite boundaries resulting in boundary creep. Boundary creep allows crystallite rotation which produces the macroscopic creep strain. Boundary creep is discussed in terms of the fibre morphology and a model of delayed elasticity.     

The Effect of Polymer Optoelectronic Properties on the Performance of Multilayer Hybrid Polymer/TiO2 Solar Cells

We report a study of the effects of polymer optoelectronic properties on the performance of photovoltaic devices consisting of nanocrystalline TiO₂ and a conjugated polymer. Three different poly(2‐methoxy‐5‐(2′‐ethylhexoxy)‐1,4‐phenylenevinylene) (MEH‐PPV)‐based polymers and a fluorene–bithiophene copolymer are compared. We use photoluminescence quenching, time‐of‐flight mobility measurements, and optical spectroscopy to characterize the exciton‐transport, charge‐transport, and light‐harvesting properties, respectively, of the polymers, and correlate these material properties with photovoltaic‐device performance. We find that photocurrent is primarily limited by the photogeneration rate and by the quality of the interfaces, rather than by hole transport in the polymer. We have also studied the photovoltaic performance of these TiO₂/polymer devices as a function of the fabrication route and device design. Including a dip‐coating step before spin‐coating the polymer leads to excellent polymer penetration into highly structured TiO₂ networks, as was confirmed through transient optical measurements of the photoinduced charge‐transfer yield and recombination kinetics. Device performance is further improved for all material combinations studied, by introducing a layer of poly(ethylene dioxythiophene) (PEDOT) doped with poly(styrene sulfonic acid) (PSS) under the top contact. Optimized devices incorporating the additional dip‐coated and PEDOT:PSS layers produced a short‐circuit current density of about 1 mA cm^–2, a fill factor of 0.50, and an open‐circuit voltage of 0.86 V under simulated AM 1.5 illumination (100 mW cm^–2, 1 sun). The corresponding power conversion efficiency under 1 sun was ≥ 0.4 %.