Wave propagation in two-phase flow of magnetic fluid under a nonuniform magnetic field

The effect of nonuniform magnetic field on the linear and nonlinear wave propagation phenomena in two-phase pipe flow of magnetic fluid is investigated theoretically to realize the effective energy conversion system using boiling two-phase flow of magnetic fluid. Firstly, the governing equations of two-phase flow based on the unsteady thermal nonequilibrium two-fluid model are presented and the linear void wave propagation phenomena in boiling two-phase flow are numerically analyzed by using the finite volume method. Next, the nonlinear pressure wave propagation in gas-liquid two-phase flow is numerically analyzed by using the finite different method. According to these theoretical studies on the wave propagation phenomena in two-phase flow of magnetic fluid, it seems to be a reasonable proposal that the precise control of the wave propagation in two-phase flow is possible by effective use of the magnetic force.     

Seeking the truth about ad hoc join costs

In this paper, we re-examine the results of prior work on methods for computing ad hoc joins. We develop a detailed cost model for predicting join algorithm performance, and we use the model to develop cost formulas for the major ad hoc join methods found in the relational database literature. We show that various pieces of “common wisdom” about join algorithm performance fail to hold up when analyzed carefully, and we use our detailed cost model to derive op timal buffer allocation schemes for each of the join methods examined here. We show that optimizing their buffer allocations can lead to large performance improvements, e.g., as much as a 400% improvement in some cases. We also validate our cost model's predictions by measuring an actual implementation of each join algorithm considered. The results of this work should be directly useful to implementors of relational query optimizers and query processing systems. Edited by M. Adiba. Received May 1993 / Accepted April 1996     

光刻胶灰化工艺与深亚微米线条的制作

随着器件尺寸的缩小，细线条的制作成为很关键的工艺，普通光学光刻已接近其分辨率的极限，而电子束光刻和Ｘ射线光刻技术复杂、费用昂贵。本文对光刻胶灰化工艺进行了分析和研究，并应用此工艺进行了深亚微米线条的制作，在普通光学光刻机上制作出宽度小于０．２５μｍ细线条。我们已将此工艺成功地应用在深亚微米ＭＯＳＦＥＴ的制作中。     

Automatic generation of IDEF0 models

This paper looks into a new area for knowledge-based system application, that of manufacturing modelling. Manual generation of IDEF0 models of manufacturing systems is time-consuming and inconsistent. However, the process can be automated to improve timeliness and consistency. In this paper, a knowledge-based manufacturing modelling system for the automatic generation of IDEF0 models is proposed. The system will not only greatly reduce the IDEF0 modelling time but will also eliminate the inconsistency problem of conventional IDEF0 modelling systems. The paper explains the knowledge-based approach and identifies the kinds of domain knowledge that are required for the construction of the knowledge-based manufacturing modelling system.     

多级脉冲深穿透射孔技术

目前国内较先进的射孔工艺是增效射孔和三相流射孔,这2种射孔工艺均存在射孔深度和造缝深度浅的问题,尤其是对低渗油藏和纵向渗透率远大于横向渗透率的油藏,此造缝深度并不能满足油田生产的需要.介绍了一种新型的射孔技术,它是一种能进行深度射孔造缝的多级射孔技术,利用三级推进剂燃爆时产生峰值不连续的高温、高压气流,形成多级脉冲,多次冲击射孔孔眼前沿的裂缝,使其有效延伸至地层深处,从而较单独的射孔更能有效地增加油气产量.通过地面水泥靶的试验,证明了该射孔器的延缝功能和安全性;通过塘32等井的现场试验,证明该射孔技术对污染地层解堵有显著效果,可明显地降低地层破裂压力.     

自升式平台深水化改造的新模式及其可行性分析

针对我国现有自升式平台存在的不能满足深水域勘探开发的要求以及造价过高等问题,提出一种自升式平台深水化改造新模式——分体坐底自升式平台,在基本不改变原有平台结构的基础上,通过增加可沉浮平台下体,使作业水深增加50m以上,而造价比同工作水深的常规自升式平台低得多。文章介绍了该分体坐底自升式平台的结构方案、作业工况及操作程序,分析了该平台的技术可行性和经济可行性,并提出了深入研究和具体实施需要解决的问题。     

利津地区深层沙三、沙四段油藏测试评价

利用测试资料，将利津地区深层沙三、沙四段油藏分为5种油藏类型：①高压、低-极低渗、导数曲线后期上翘、地层存在非均质性的油藏；②高压、低渗、无污染、双孔介质的油藏；③高压、低-中渗、无-轻微污染的复合油藏；④常-高压、低渗、有污染的油藏；⑤常-高压、极低渗、无污染、干层的油藏。最后对利津地区深层沙三、沙四段各种类型油藏进行了评价，认为利津地区深层沙三、沙四段自然产能较低，一般需要进行改造措施来提高渗透性，提高产能。     

钡酚醛树脂体系化学流变特性研究

在粘度实验和DSC热分析实验的基础上,对用于RTM工艺的钡酚醛树脂体系的化学流变特性进行研究,并根据双阿累尼乌斯方程建立树脂体系的流变模型。模型与实验结果具有良好的一致性。模型可揭示树脂体系在不同工艺条件下的粘度变化规律,定量预报RTM工艺树脂的低粘度平台工艺窗口,为合理制定RTM工艺参数、保证产品质量和实现工艺参数的全局优化提供必要的科学依据。     

Uncertainty in Quantitative Electron Probe Microanalysis

Quantitative electron probe analysis is based on models based on the physics or x-ray generation, empirically adjusted to the analyses of specimens of known composition. Their accuracy can be estimated by applying them to a set of specimens of presumably well-known composition.     

黄河下游稳定主槽之节点整治

稳定主槽是当前黄河下游河道治理的关键。窄深河槽具有很强的泄洪能力与输沙能力,是主槽整治追求的目标。黄河下游均是顺直微弯河道,河道水流最基本的主导机理是沿着阻力最小的方向流动,走直路、走近路,主槽整治设计流路应以顺直为上策。当前有必要对微弯整治方案进行再认识,实现对其否定之否定的提高。控制性弯道整治、对口丁坝整治、节点整治都属于双岸整治的范畴,对双岸整治的方向应予肯定。今后的整治应从微弯整治向节点整治发展,逐步过渡到以节点整治为主,最终达到稳定河势流路、高效排洪输沙之目的。